FIF Blog
FIF Blog
mobile logo How Do You Reupholster Bar Stool Cushions?

DIY furniture Tag

How Do You Reupholster Bar Stool Cushions?
August 13, 2026

How Do You Reupholster Bar Stool Cushions?

Recovering a bar stool seat pad is one of the most rewarding furniture jobs, and on a drop in pad it takes under an hour per stool. The method is straightforward: unscrew the pad, lift the old staples carefully so the cover can serve as a template, judge whether the foam is still sound, then stretch new fabric over the pad and staple it underneath. This guide covers the fabric allowance you need, why a layer of polyester wadding makes the difference between a soft edge and a hard rim, and how to pleat round and square corners neatly. It explains which stools cannot be recovered at all, how to fix a stripped screw hole, and which fabrics hold up in a working kitchen where meals happen at the counter every day....

Continue Reading
How Do You Make a Simple Bar Stool?
August 13, 2026

How Do You Make a Simple Bar Stool?

The simplest bar stool to make is a three legged one: a round seat and three straight legs, with no rails to cut and no frame to square. Because three points always define a plane, the stool cannot rock even on an uneven floor. This guide covers the materials and section sizes, calculating leg length from your counter height with an allowance for the leg angle, setting out three evenly spaced leg positions, and drilling the ten degree splay accurately using a simple angled scrap block. It explains the traditional wedged dowel joint and the simpler screwed block alternative, how to scribe and trim angled legs so they sit flat, and the comfort details that matter most on a backless seat, including a dished top and a generously rounded edge....

Continue Reading
How Do You Chalk Paint Bar Stools?
August 13, 2026

How Do You Chalk Paint Bar Stools?

Chalk painting bar stools is straightforward provided you get the preparation and the sealing right, and this guide covers both in detail. It explains how to degrease and lightly key a surface for good adhesion, which materials chalk paint will not bond to, and why upholstery and gas lift columns must be masked off. You will find guidance on applying thin coats with a flat brush, when to sand between coats, how to distress edges without overdoing it, and the important choice between soft wax and matt polyurethane varnish for a kitchen environment. It also sets out realistic drying and curing times before the stools go back into daily use. There is guidance on which surfaces genuinely need a primer despite chalk paint's reputation for sticking to anything, how to load a brush so the finish stays even, and how to build coats thinly rather than trying to cover in one pass....

Continue Reading
How Do You Hang Wardrobe Doors?
August 13, 2026

How Do You Hang Wardrobe Doors?

Wardrobe doors are hung by drilling a 35mm cup recess in the back of the door, screwing matching mounting plates to the carcass at the same heights, then clipping the hinge arms on and using the three adjustment screws to even out the gaps. That adjustment stage is what separates a hung door from a well hung one. This guide explains concealed cup hinges, overlay types and opening angles, how many hinges a door of a given height and weight actually needs, and how to mark a pair of doors together so the hinge heights match. It covers drilling the recess to the right depth without breaking through the face, transferring plate positions accurately, and the correct order for height, side and depth adjustment. There is also practical advice on rehanging a door that has dropped through worn chipboard, working with traditional butt hinges, and knowing when the material itself has failed. A short FAQ follows....

Continue Reading
How Do You Build a Wardrobe with Drawers?
August 13, 2026

How Do You Build a Wardrobe with Drawers?

Building a wardrobe with drawers works best in a fixed order: square the carcass, fix the back panel, mount the runners while the side panels are still accessible, then build and fit the drawer boxes last. This guide starts with planning the interior on paper, allocating clear drops for long and short hanging and placing the drawer bank at a height that is genuinely comfortable to use rather than at ankle level. It compares the three ways to support drawers, hanging them from the side panels, running them either side of a vertical divider or building a separate module on the bench, and explains which suits narrow and wide wardrobes. It also covers choosing between roller, ball bearing and undermount runners, why the runners must be bought before the boxes are cut, marking heights accurately with a story stick, building boxes that stay square, and fitting fronts and handles consistently....

Continue Reading
How Do You Make a Fold up Bar Stool?
August 13, 2026

How Do You Make a Fold up Bar Stool?

Folding seating earns its place in kitchens, utility rooms and garden bars where a stool is needed now and then rather than every day. Building one is a satisfying weekend project, but it depends on getting the scissor frame geometry right and, more importantly, on limiting how far the legs can open. This guide explains how to calculate leg lengths for a bar height seat, where to place the pivot, and how to assemble the frame with bolts, washers and locking nuts that will not work loose. It also covers fitting a stop block and safety limiter, testing the stool properly before use, design details that improve comfort, and honest limits on what home built folding seating can take....

Continue Reading
How Do You Build Armoire Wardrobe?
August 13, 2026

How Do You Build Armoire Wardrobe?

An armoire is built as a freestanding cabinet rather than a fitted unit, which means a full box with a finished back, a plinth at the base, a cornice at the top and panelled double doors on the front. This guide explains what separates an armoire from an ordinary wardrobe carcass and why the sides deserve the same finish as the front. We cover traditional proportions, the internal depth hangers require, and the ceiling and staircase measurements to check before committing to a height. There is practical detail on assembling the carcass square, using a thicker back panel where it may be seen, setting the plinth back to create a shadow line, and keeping the cornice projection modest in low ceilinged rooms. We also show a simpler route to panelled doors using applied mouldings, plus advice on hinges, interior layout, finishing and hardware....

Continue Reading
How Do You Fit Sliding Wardrobe Doors?
August 13, 2026

How Do You Fit Sliding Wardrobe Doors?

Sliding wardrobe doors are fitted by screwing the top track to a level header, positioning the bottom track directly beneath it, then engaging each door in the top track before locating the bottom guides. Adjuster screws at the base of each door then bring it plumb so the gaps read evenly. Almost every problem with sliding doors traces back to one cause: tracks that are not in the same vertical plane. This guide covers checking the opening at six points, fixing the top track into joists rather than plasterboard, dropping a plumb line for the bottom track, packing an uneven floor, and the correct lifting sequence for top hung and bottom roller systems. It also explains how to adjust for even gaps, finish the side scribes, keep the channels clean, and diagnose doors that judder, rattle or jump out of the track. A short FAQ covers track height, mirrored panels and adjusting rollers after fitting....

Continue Reading
How Do You Recover Leather Bar Stools?
August 13, 2026

How Do You Recover Leather Bar Stools?

Recovering leather bar stools follows the same broad steps as fabric reupholstery, but leather behaves differently: it does not fray, it will not spring back once stretched, and every staple hole is permanent. This guide explains how to strip the old covering cleanly, judge whether the foam needs replacing, and stretch new leather with steady moderate tension rather than pulling hard. It covers the practical differences between real leather and faux, how much material to allow per seat, how to fold round and square corners without bulk, and why polyester wadding matters more under leather than under fabric. Honest guidance on when replacement makes more sense than recovering is included. It also explains how to work with a hide that has grain and stretch of its own, why corners need thinning rather than folding, and how a conditioning routine keeps a newly covered leather seat looking right through years of daily kitchen use....

Continue Reading
How Do You Spray Paint Metal Bar Stools?
August 13, 2026

How Do You Spray Paint Metal Bar Stools?

Metal bar stools tend to outlast their finish, and a tired frame is a good candidate for spray paint rather than replacement. The result depends almost entirely on preparation: degreasing kitchen grime, keying the surface so primer can grip, and building colour in thin coats instead of one heavy pass. This guide sets out the full process for painting metal stools at home, from stripping off seat pads and treating light rust to masking adjustment collars, spraying at the right distance and allowing proper curing time before anyone sits down. It also covers the safety basics for aerosol work, how to care for painted frames in a working kitchen, and the mistakes that most often lead to chipping or peeling later....

Continue Reading