FIF Blog
FIF Blog
mobile logo How Do You Upholster a Bar Stool with a Back?

Bar Stools Tag

How Do You Upholster a Bar Stool with a Back?
August 11, 2026

How Do You Upholster a Bar Stool with a Back?

Reupholstering a bar stool with a back is really two jobs in one, and the backrest is where most home projects come unstuck. This guide works through the whole process in sequence, from photographing the original folds and checking the frame for loose joints, to measuring fabric properly and choosing a weight that will survive kitchen use. It explains how to strip the old cover so the pieces become accurate templates, how to bond and trim foam, and the four staple method that sets even tension across a seat before corners are attempted. The backrest section covers wrapping the front face, cutting cleanly around uprights, and finishing the outside back with either a stapled panel or a braid over a visible staple line, along with guidance on when a frame is worth saving and when replacement makes more sense....

Continue Reading
What Height Is Bar Height Stools?
August 11, 2026

What Height Is Bar Height Stools?

Bar height stools sit in a specific band that suits tall bar surfaces rather than standard kitchen worktops, and confusing the two tiers is the most common seating mistake in UK homes. This article sets out the seat heights for dining, counter and bar tiers, then explains the clearance rule that works for any surface, including bespoke and stepped worktops. It covers why measuring to the underside matters, the difference between seat height and quoted overall height, how adjustable ranges bridge the tiers, and why footrests become essential at the taller level. Practical pre order checks cover overhang depth, uneven floors and who will actually use the bar....

Continue Reading
How Do You Dismantle a Telescopic Bar Stool?
August 11, 2026

How Do You Dismantle a Telescopic Bar Stool?

Telescopic bar stools come apart with a mallet and a wrench rather than a screwdriver, because both ends of the gas lift column are held by a friction taper instead of a thread. This guide explains that construction first, then works through the sequence in order: releasing the footring collar, separating the seat by twisting against the column while tapping the seat plate, and freeing the base by working around the socket rather than striking one point. We cover the tools that protect chrome, why the reassembly order differs from the dismantling order, and why you should sit on the finished stool once to lock both tapers. There is also advice on replacing a failed cartridge while the stool is open, safe disposal, and packing dismantled parts for a house move....

Continue Reading
How Do You Fix Swivel Bar Stools?
August 11, 2026

How Do You Fix Swivel Bar Stools?

Fixing a swivel bar stool usually starts with the simplest checks, because loose fixings cause most wobbles and squeaks. Beyond that, a grinding seat points to a dry or worn swivel plate, while a seat that sinks or refuses to rise means the gas lift cylinder has lost pressure and needs replacing. This guide explains how to diagnose each fault by isolating the movement that causes it, how to tighten a plate into worn timber, how to regrease bearings properly and how to swap a gas cylinder safely. We also look at cracked bases, worn floor glides and the point at which replacing the stool makes more sense than repairing it....

Continue Reading
How Do You Make Wooden Bar Stools with Backs?
August 11, 2026

How Do You Make Wooden Bar Stools with Backs?

Making a wooden bar stool with a back starts with one structural decision: the rear legs run in a single piece from the floor to the top of the back, rather than a back being added to a finished stool. This guide covers timber selection and why properly dried hardwood matters, how to work out leg lengths from your worktop height, cutting tapered legs and raked back posts, and why mortise and tenon joinery is worth the extra effort on a piece that takes constant racking loads. It also covers dishing the seat for comfort, staged assembly, fixing a solid seat so it can move with humidity, and choosing a kitchen ready finish....

Continue Reading
How Do You Pick Bar Stool Height?
August 11, 2026

How Do You Pick Bar Stool Height?

Picking bar stool height starts with one measurement: floor to the underside of your counter, minus 28cm. This guide explains why the underside matters more than the top surface, how worktop thickness and island support frames quietly reduce your clearance, and why rounding down is always safer than rounding up. It covers the two UK height standards, the counter overhang needed for genuine knee room, and how your own leg length can shift the answer within a height band. There is practical guidance on footrest position, seat depth, backs and arms, how many stools fit a given island length, walkway clearance behind seating, and a simple way to test a seat height at home with books and a cushion before you order anything....

Continue Reading
Can You Cut Bar Stools to Counter Height?
August 11, 2026

Can You Cut Bar Stools to Counter Height?

Cutting bar stools down to counter height is possible on many frames, though not on all of them. This guide explains which types can be shortened, how to calculate the exact amount to remove from your worktop measurement, and why the footrest position is the detail most people overlook. We cover marking and cutting straight and splayed legs, keeping the cut parallel to the floor so the stool does not rock, sealing exposed timber and fitting new feet. There is honest advice on how much material a frame can lose before the proportions suffer, why joints and stretcher rails dictate where the cut can fall, and the finishing details that make a shortened stool look deliberate rather than improvised. We close with a simple ten minute test that tells you whether height is genuinely the problem before any saw comes out, and when buying the correct height instead is the more sensible use of your afternoon and your money....

Continue Reading
How Do You Pressure a Bar Stool?
August 11, 2026

How Do You Pressure a Bar Stool?

People often ask how to pressure a bar stool after the seat starts sinking, but a sealed gas lift cylinder cannot be topped up at home because it has no filling valve. This guide explains how the mechanism actually works, how to tell a genuine cylinder failure apart from the loose fixings, misaligned levers and worn glides that cause similar symptoms, and which of those you can put right yourself. It walks through a proper diagnosis, the tightening and lubrication that restores a stool still holding height, what cylinder replacement involves and when it is worth the effort, and how a support collar buys time in the meantime. There are also practical notes on why cylinders fail early, and how to choose seating that avoids the problem altogether next time....

Continue Reading
How Much Space Do You Need Between Bar Stools?
August 11, 2026

How Much Space Do You Need Between Bar Stools?

Bar stool spacing works best planned outwards from the stool rather than by dividing the counter and hoping for the best: allow 15cm to 20cm of clear space between seats, or roughly 65cm to 70cm centre to centre. This guide explains why the base diameter often matters more than the seat width, how much clearance to leave at each end of a run, and why the walkway behind the stools is usually the real constraint in British kitchens. It covers overhang depth and knee room, how backless, low backed, armed and swivel designs each change the numbers, and how spacing differs around round and rectangular bar tables with column bases. There is practical advice on gaining room in a narrow galley or peninsula layout, plus a short planning sequence that ends with marking positions on the floor before ordering anything....

Continue Reading
How Do You Reupholster a Bar Stool?
August 11, 2026

How Do You Reupholster a Bar Stool?

Reupholstering a bar stool is one of the most achievable furniture projects in the home, because the seat detaches and the shape is simple enough to work on flat. This guide walks through the whole job: removing the pad, stripping old staples, judging whether the foam needs replacing, and stapling new fabric with even tension so curves and corners sit flat. It also covers the short tool and material list, how much fabric a single stool needs, which upholstery fabrics stand up to kitchen use, and the situations where a failed gas lift or the wrong seat height mean replacement makes more sense than recovering....

Continue Reading