FIF Blog
FIF Blog
mobile logo How Do You Clean Chrome Bar Stool Base?

Bar Stools Tag

How Do You Clean Chrome Bar Stool Base?
August 11, 2026

How Do You Clean Chrome Bar Stool Base?

A chrome bar stool base needs gentler cleaning than most people give it, because the plating is only microns thick and nearly all damage comes from over enthusiastic scrubbing. This guide sets out a simple routine: warm soapy water on a microfibre cloth followed by immediate drying, diluted white vinegar for hard water spotting, and aluminium foil dipped in water for light surface rust. It explains why the drying step matters so much in British hard water areas, which products to keep well away from chrome including bleach based bathroom sprays and cutting polishes, and how to treat leather and fabric seats at the same time. Prevention advice covers splash zones, felt pads and loose fixings, with a straightforward weekly, monthly and twice yearly schedule....

Continue Reading
How Many Inches Between Bar Stools?
August 11, 2026

How Many Inches Between Bar Stools?

Six to ten inches between bar stool seats is the working range, which translates to twenty six to thirty inches measured centre to centre once seat width is accounted for. This guide explains why centre to centre planning is more reliable than a fixed gap, and why counter seating needs more lateral room per person than a dining table where you can angle your chair. It covers measuring the genuinely usable counter length, how backless, low back and armed designs change the numbers, the extra separation needed where seating turns a corner, and the clearance required both behind the row and beneath the overhang for knees. There is also practical advice for short runs in small UK kitchens, including when two well spaced stools beat three squeezed in, and how to keep a row looking evenly planned....

Continue Reading
How Do You Make a Swivel Bar Stool Stationary?
August 11, 2026

How Do You Make a Swivel Bar Stool Stationary?

Making a swivel bar stool stationary means fixing the two halves of the mechanism so they can no longer move independently. Two short screws driven through the swivel plate into the seat board is the quickest dependable method, while removing the plate entirely and refitting the seat on a plywood spacer is the permanent one. This guide explains how to identify your mechanism, why diagonal fixings hold better than a single screw, and how to protect your seat height when the plate comes out. We also cover why gas lift stools resist being fixed, the alternatives worth trying first, and how to choose static seating from the outset....

Continue Reading
How Do You Choose Bar Stools Kitchen Height?
August 11, 2026

How Do You Choose Bar Stools Kitchen Height?

Choosing the right bar stool height for your kitchen starts with identifying which surface you are actually sitting at, since a fitted worktop, a raised breakfast bar and a dining table all need different seating. This guide explains the standard UK heights for each, why you measure to the underside of the worktop rather than the top, and how to decide where to land within the 25cm to 30cm clearance range depending on who uses the stools. It also covers when adjustable gas lift stools make sense, why footrest position and seat depth become more important as height increases, and how total height affects a small kitchen....

Continue Reading
What Height Bar Stools for 42 Inch Counter?
August 11, 2026

What Height Bar Stools for 42 Inch Counter?

A 42 inch counter is about 107cm, which puts it firmly in the bar height category rather than the standard worktop category. This guide gives the seat height you need, roughly 30 to 32 inches or 76cm to 81cm, and shows the calculation in both imperial and metric so you can check it against any surface. It explains why counter height stools leave an uncomfortable 16 inch gap, how a thick stone or timber top quietly reduces your clearance, and why footrests and base width become far more important as seat height rises. There is also advice on knee room and overhang on narrow raised bars, choosing adjustable stools by their maximum height, spacing and walkway clearance, and what to do if you have already bought the wrong size....

Continue Reading
How Do You Cut Legs off Bar Stool?
August 11, 2026

How Do You Cut Legs off Bar Stool?

Shortening bar stool legs is a straightforward job when the marking and cutting are done in the right order. This guide sets out the full process: measuring each leg separately, scribing a line parallel to the floor on splayed frames, using masking tape and a mitre box for a square cut, then levelling and sealing the ends afterwards. We explain how to handle timber and metal tube differently, what to do when a footrest ends up too close to the floor, and which frames should never be cut at all. There is practical advice on floor protectors, touch up finishes and when replacing the stools makes more sense than modifying them. We also cover working safely with clamps and glasses, how to approach sled bases, cross braced frames and adjustable feet, and why every fixing should be rechecked a week after the job is finished, once the frame has settled into its new proportions under daily use....

Continue Reading
How Do You Assess Bar Stools?
August 11, 2026

How Do You Assess Bar Stools?

Bar stools work harder than most seating: they are climbed onto rather than sat into, they carry weight at height and they take daily knocks in a kitchen. This guide sets out a five point assessment covering the frame and joints, seat height against your own counter, padding and upholstery quality, swivel or gas lift mechanisms, and stability under real weight. We explain what a sound weld looks like, how to test foam at the front edge where wear begins, and the specific signs that a gas cylinder is losing pressure. There is also guidance on weight capacity figures, footrest positioning, floor protection, and how to judge stools you already own to decide whether tightening, recovering or replacing is the right call....

Continue Reading
How Much Are Bar Stools?
August 11, 2026

How Much Are Bar Stools?

Asking what bar stools cost is really asking what you are paying for, and the answer sits in the construction rather than the styling. This guide breaks down the four factors that move the figure: frame material, seat construction, mechanism quality and whether you buy singly or in pairs. We look at how welded steel differs from thin pressed tube, why moulded cold cure foam outlasts low density sheet foam, and what separates a gas cylinder that holds its height from one that sinks within a year. There is honest guidance on where households tend to overspend, usually on adjustment they never use, and where they underspend, typically on footrests, bracing and floor protection. We finish by reframing the question around cost per year of comfortable use, covering repairability, sensible seat counts for a standard island, and answers to common questions....

Continue Reading
How Tall Should Bar Stools Be for 36 Inch Counter?
August 11, 2026

How Tall Should Bar Stools Be for 36 Inch Counter?

A 36 inch counter equals 91cm, which is standard worktop height in most British kitchens and calls for counter height stools rather than true bar stools. This guide gives the seat height range that works, explains the simple arithmetic behind it, and shows why the popular 30 inch bar stool leaves far too little knee room at a worktop. It covers measuring properly from the finished floor, checking the obstructions and overhang underneath that quietly reduce clearance, deciding between fixed and adjustable seating, and working out how many stools a given island run will genuinely take. There are also notes on backs and footrests at this height, matching finishes to cabinetry, the errors people make most often, and a quick test to run before ordering....

Continue Reading
What Is the Best Bar Stool?
August 11, 2026

What Is the Best Bar Stool?

There is no single best bar stool, only the stool that suits a particular kitchen, so this guide sets out the criteria to judge one yourself. It starts with the four features that decide comfort: seat height matched to the counter, a seat depth that supports the thighs, a low back that meets the lumbar curve, and a ring footrest at the right distance below the seat. It then explains how to read build quality from a specification, covering weight capacity, base material, how the seat attaches and whether floor protectors can be replaced. Leather, woven fabric, boucle and solid timber are compared for wear, warmth and cleaning, alongside fixed, swivel and gas lift mechanisms and the differences between backless, low back and full back designs. There is also advice on relating stools to existing dining seating and buying a full set in one order....

Continue Reading