How To Guide For Your Home Blog

August 13, 2026

How Do You Build a Wardrobe with Drawers?

Building a wardrobe with drawers works best in a fixed order: square the carcass, fix the back panel, mount the runners while the side panels are still accessible, then build and fit the drawer boxes last. This guide starts with planning the interior on paper, allocating clear drops for long and short hanging and placing the drawer bank at a height that is genuinely comfortable to use rather than at ankle level. It compares the three ways to support drawers, hanging them from the side panels, running them either side of a vertical divider or building a separate module on the bench, and explains which suits narrow and wide wardrobes. It also covers choosing between roller, ball bearing and undermount runners, why the runners must be bought before the boxes are cut, marking heights accurately with a story stick, building boxes that stay square, and fitting fronts and handles consistently....

August 13, 2026

How Do You Build Armoire Wardrobe?

An armoire is built as a freestanding cabinet rather than a fitted unit, which means a full box with a finished back, a plinth at the base, a cornice at the top and panelled double doors on the front. This guide explains what separates an armoire from an ordinary wardrobe carcass and why the sides deserve the same finish as the front. We cover traditional proportions, the internal depth hangers require, and the ceiling and staircase measurements to check before committing to a height. There is practical detail on assembling the carcass square, using a thicker back panel where it may be seen, setting the plinth back to create a shadow line, and keeping the cornice projection modest in low ceilinged rooms. We also show a simpler route to panelled doors using applied mouldings, plus advice on hinges, interior layout, finishing and hardware....

August 13, 2026

How Do You Change Wardrobe?

Changing a wardrobe covers two jobs that are usually done at once: replacing the unit and rethinking what lives inside it. Getting the furniture part right starts before anything is bought, with measurements of the doorway and stair turn rather than the bedroom, and continues with careful assembly, packers under the base and a wall bracket for safety. This guide walks through emptying and removing the old wardrobe, making good the wall behind it, building the new carcase square and adjusting the hinges so the door gaps sit even. It then turns to the contents, with a straightforward sorting method, advice on grouping clothes by category rather than colour, and where shoes, bedding and small daily items are better stored so the fresh start survives longer than a month....

August 13, 2026

How Do I Fit Sliding Wardrobe Doors?

Sliding wardrobe doors run smoothly for years when the tracks are right and fight you forever when they are not, which is why almost all of this job happens in the first ten minutes. This guide takes you through the sequence in order: checking the opening in three places, levelling and shimming the bottom track, plumbing the top track directly above it rather than measuring down from a sloping ceiling, then hanging the rear door before the front. We explain how to set the roller adjustment to an even closing gap, and how two simple symptoms diagnose nearly every fault, a door that drifts open and a door that binds halfway. There is also guidance on the internal depth sliding channels consume, the mistakes worth avoiding, and when a ready made unit is the more sensible choice....

August 13, 2026

How Do You Install a Sliding Wardrobe Door?

Installing a sliding wardrobe door comes down to four stages: fixing the top track to a solid header, laying and levelling the bottom guide directly beneath it, lifting each panel into the channels, then adjusting the rollers so the closed door sits parallel with the frame. The order matters and so does the accuracy of the first two stages, because a track that is not straight or a guide that is not parallel produces doors that drift and judder. This guide covers checking the opening at six points, cutting and fixing the track to the correct offset, plumbing the guide down from the track above, hanging the rear panel first, and fine tuning with the roller adjustment screws. We also look at panel choice, filler strips for out of square openings and securing the carcass to the wall. A closing section explains how to keep the doors running smoothly, including why you should never oil the track....

August 13, 2026

How Do You Build Sliding Wardrobe Doors?

Sliding wardrobe doors work well when the tracks are right and cause endless problems when they are not. This guide explains how top hung and bottom rolling systems differ, then works through the build in order: measuring an opening at three points, calculating door overlap, checking floor and ceiling levels, fitting and levelling the top track, plumbing the bottom track directly beneath it, assembling framed panels around glass or gloss without overtightening, and hanging the rear door before the front. It finishes with roller adjustment for a clean leading edge, plus fixes for doors that drift open, bind, rattle or jump the track, and advice on keeping the channel clean without oil....

August 13, 2026

How Do You Level a Bar Stool?

A rocking bar stool is rarely a mystery once you separate the stool from the floor, and this guide starts with the thirty second test that tells you which one is at fault. It walks through tightening a frame in the correct sequence so you do not lock it out of square, then moves to the feet, where most levelling problems are genuinely solved, covering worn plastic glides, threaded adjustable glides and felt shims. There is practical guidance for the uneven floors common in UK homes, including tiles that sit proud, cupped boards and the classic problem of a stool sitting half on a rug. Gas lift and swivel stools get their own section, since a lean at seat height often traces back to an unseated column joint. Maintenance habits and clear signs that a frame has reached the end are also included....

August 13, 2026

How Do You Stop Mold in Wardrobes?

Mould in a wardrobe is a humidity problem rather than a cleaning problem, which is why wiping it away rarely keeps it from returning. This guide explains the mechanism first: warm moist bedroom air meeting the cold back panel of a unit pressed against an external wall, with no airflow to carry the condensation away. It then sets out the fixes in order of effectiveness, starting with pulling the wardrobe at least 50mm off the wall and ventilating the room daily, followed by steady low level heating rather than short evening bursts, and sensible storage habits such as never putting away slightly damp clothing and avoiding plastic garment covers. There is a full cleaning method for growth that has already taken hold, advice on which products are safe on veneer and laminate, and guidance on recognising when the real cause is penetrating damp or cold bridging in the building itself, plus how to spot board that has swollen beyond saving....

August 13, 2026

How Do You Lower Adjustable Bar Stools?

Lowering an adjustable bar stool is straightforward once you know which mechanism you have and the order the steps need to happen in. This guide explains the gas lift method, why a seat will not drop while your weight is on it, and how to reset a run of stools so every seat sits at the same height. It also covers screw thread and pin designs, common reasons a stool refuses to move including cold cylinders and locking collars, and how to work out the correct seat height from the underside of your worktop. There is practical maintenance advice for keeping a gas column clean in a working kitchen, plus guidance on when a fixed height stool is the more sensible choice....

August 13, 2026

How Do You Put Shelves in a Wardrobe?

Fitting shelves into a wardrobe is a batten and board job that most people can complete in an afternoon with basic tools. This guide covers deciding shelf heights around what you actually store, choosing board and batten sizes, marking and fixing battens level in a wardrobe that may not be standing on a level floor, and cutting a shelf slightly under the measured width so it drops in without bowing the carcass. It also explains span limits before a shelf sags, when to add a back batten or central divider, and the no drill alternatives that suit rented properties....