How To Guide For Your Home Blog

August 13, 2026

How Much Does It Cost to Assemble a Wardrobe?

Flat pack wardrobe assembly in the UK generally costs between £60 and £150 for a standard two door unit, rising to £120 to £250 for larger multi door and sliding designs, with hourly handyperson rates commonly £30 to £50. This guide breaks down what actually drives the price: unit size and panel count, the extra precision sliding door tracks demand, the handling risk of mirrored panels, regional rates and access difficulty. It sets out what a reasonable service should include and flags three things frequently excluded, namely wall anchoring, packaging removal and levelling on the uneven floors common in older British homes. For anyone building it themselves, there is a practical order of work covering fitting identification, leaving fixings loose until the carcass is checked square across both diagonals, fitting the back panel to lock that squareness in, and levelling before the doors go on, along with realistic time estimates....

August 13, 2026

How Do You Stop Wardrobe Mould?

Mould in a wardrobe is a condensation problem rather than a furniture fault, and it needs the conditions changed rather than simply cleaning away. This guide explains the mechanism: moist air from cooking, showering and drying laundry meets the coldest surface in the room, which is often the back panel of a wardrobe pressed against an external wall. We cover the practical fixes in order of effect, from pulling the unit five to ten centimetres off the wall and switching to an internal wall, through daily ventilation habits, trickle vents, controlling moisture at source, dehumidifiers and steady low heating. There is also guidance on cleaning existing mould without damaging board panels, and on protecting leather and shoes. There is a short section on why packing a wardrobe tightly makes the problem worse, how breathable covers differ from plastic ones for long term storage, and the signs that suggest the wall itself needs attention rather than the furniture standing against it....

August 13, 2026

How Do You Add Extra Shelf to Wardrobe?

To add an extra shelf to a wardrobe, measure the internal width at three heights, cut a board to the smallest figure minus 2mm, then support it on either shelf pins in drilled holes or timber battens screwed to the side panels. Battens carry more weight and are easier to fit accurately, while pins look neater because nothing shows beneath the shelf. This guide covers accurate measuring, choosing between melamine board, MDF and plywood, and why 18mm is the sensible minimum thickness on any span over 60cm. It also sets out both fitting methods step by step, lists reversible no drill alternatives for rented homes, and gives practical shelf spacing figures for folded clothing, shoes and storage boxes. It also explains how to check a shelf sits level before it takes any weight, and how to finish a cut edge so the board looks like part of the original wardrobe....

August 13, 2026

How Do You Fix a Broken Bar Stool Leg?

Whether a broken bar stool leg is worth repairing depends almost entirely on the direction of the break. This guide explains how to read a failure, why a clean split along the grain glues back stronger than the surrounding timber while a cross grain break needs mechanical reinforcement, and how to work adhesive into the full depth of a crack before clamping it overnight. It covers dowel reinforcement, rebuilding a snapped tenon inside the seat frame, what can and cannot be done with bent or cracked metal legs, the point at which bar height seating makes repair unwise, and the everyday habits that cause most leg failures....

August 13, 2026

How Do You Reupholster Bar Stool Cushions?

Recovering a bar stool seat pad is one of the most rewarding furniture jobs, and on a drop in pad it takes under an hour per stool. The method is straightforward: unscrew the pad, lift the old staples carefully so the cover can serve as a template, judge whether the foam is still sound, then stretch new fabric over the pad and staple it underneath. This guide covers the fabric allowance you need, why a layer of polyester wadding makes the difference between a soft edge and a hard rim, and how to pleat round and square corners neatly. It explains which stools cannot be recovered at all, how to fix a stripped screw hole, and which fabrics hold up in a working kitchen where meals happen at the counter every day....

August 13, 2026

How Do You Build New Wardrobe?

Building a new wardrobe follows one dependable order: structure first, alignment second, doors and fittings last. This guide begins with the preparation most people skip, clearing a working area larger than the wardrobe itself, protecting the floor so panels cannot flex as you tighten fixings, and checking whether your ceiling height allows a tall carcass to be tilted upright at all. It explains how to check parts against the list before you start, sort fixings so you never reach for the wrong screw length, assemble the carcass flat, confirm it is square by comparing diagonals and fix the back panel before the piece is stood up. It then covers levelling on uneven British floors, fixing the wardrobe to a stud or masonry for stability, positioning rails and shelves around the clothes you actually own, hanging doors with even gaps, and the common mistakes, chiefly overtightening, that are hardest to undo....

August 13, 2026

How Do You Anchor Wardrobe to Wall?

Anchoring a wardrobe to the wall is a twenty minute job with serious consequences if skipped, and the right method depends entirely on what your wall is made of. This guide explains how to tell masonry, timber stud and dot and dab plasterboard apart, then which fixings suit each: wall plugs, wood screws into studs, or heavy duty metal toggles where no stud lines up. We cover levelling the carcass before fixing, why the thin back panel is never a suitable fixing point, and how positioning fixings high and wide resists tipping most effectively. There is also practical advice on loading weight low, dealing with carpet and springy floorboards, and how to test the job properly afterwards....

August 13, 2026

How Do You Make Sliding Wardrobe Doors?

Building sliding wardrobe doors is a realistic weekend project provided you divide the job correctly: you make the panels and you buy the running gear, because roller quality decides whether the doors glide or grind for years. This guide sets out sensible material choices, how to calculate panel height after deducting the track allowance, and why each door needs around forty millimetres of overlap to avoid a gap at the join. We cover cutting large boards accurately, framing the perimeter so a panel cannot bow, sealing both faces, and the practicalities of paint, veneer and safety backed mirror. There is guidance on choosing rollers rated above your finished door weight, hanging the rear panel first, and finishing details such as recessed pulls, brush seals and keeping grit out of the bottom channel....

August 13, 2026

How Do You Build a Melamine Wardrobe?

You build a melamine wardrobe by cutting melamine faced chipboard panels to size, joining them into a square box with cam locks and dowels, fitting the back panel while the carcass is flat to lock that squareness in, then adding the rail, shelves and doors. This guide explains the material first: an 18mm particleboard core with a bonded melamine face that wipes clean and needs no painting, but whose cut edges must be banded because the core swells if it takes on moisture. We cover cutting without chipping, checking the diagonals for square, supporting a hanging rail that will carry winter coats, and fitting hinged or sliding doors. We also look at fixing the unit safely to the wall, allowing for skirting boards, and when a factory built wardrobe is the better choice than a home build. We also cover how melamine behaves over time and why every cut edge needs sealing....

August 13, 2026

How Can I Get Rid of Moths in My Wardrobe?

Clothes moths are cleared by dealing with the larvae rather than the adults you happen to see, and this guide sets out the full sequence. It begins with identification, describing the ragged holes in animal fibre, the silky webbing and tubular cases, and the gritty droppings that distinguish a genuine infestation from ordinary wear. From there it covers emptying and inspecting every garment, vacuuming the crevices, shelf pin holes and rail sockets where larvae actually hide, and why treating the wool carpet under and behind the unit matters as much as the wardrobe itself. Washing at 60 degrees, freezing sealed items for 72 hours and professional cleaning are compared for different fabrics, along with the role of cedar, lavender and pheromone traps as prevention rather than cure. Seasonal storage advice and the four usual reasons an infestation returns complete the picture, together with how to quarantine second hand woollens and check the rest of the house....