FIF Blog
FIF Blog
mobile logo How Do You Make a Round Bar Stool Cover?

upholstery Tag

How Do You Make a Round Bar Stool Cover?
August 11, 2026

How Do You Make a Round Bar Stool Cover?

To make a round bar stool cover, measure the seat diameter, add twice the seat depth and a tuck under allowance, then cut a fabric circle to that size, hem the edge into a channel and thread elastic through it. This guide sets out three methods: a quick gathered cover that needs only a straight stitch, a tailored two piece cover with a separate side band for a finish close to factory upholstery, and a staple fitted recover for stools where the seat pad unscrews from the frame. We explain how to trace a seat that is not perfectly round, which fabrics survive daily kitchen use, how to calculate the length of a side band, and the tensioning technique that keeps a pattern straight. Care advice and the point at which replacing the stool makes more sense are covered too....

Continue Reading
How Much Fabric to Cover a Bar Stool Seat?
August 11, 2026

How Much Fabric to Cover a Bar Stool Seat?

Recovering a bar stool seat is one of the quickest ways to refresh a kitchen, provided you buy the right amount of fabric first. This guide gives a simple formula: seat width plus twice the pad thickness plus 8cm on every side, which for most stools works out at a 60cm square. From there we scale up to sets of four and six, explain how roll widths of around 140cm affect your calculation, and cover the extra allowance needed for pattern repeats, stripes and velvet pile direction. There is guidance on choosing an upholstery grade fabric with a suitable rub count, whether to replace the foam, and why a layer of wadding improves the finished surface. A step by step method takes you through stapling in opposing pairs, easing fullness around curves, and folding corners cleanly, with extra notes for bucket seats and low backrests....

Continue Reading
How Do You Replace Bar Stool Seat?
August 10, 2026

How Do You Replace Bar Stool Seat?

A worn seat rarely means the end of a bar stool, since frames, footrings and gas lifts usually outlast upholstery by years. This guide covers both practical routes: fitting a ready made replacement seat, and recovering the one you already have. We explain how to identify your seat construction before dismantling anything, why screws should be undone and retightened in a diagonal pattern, and how to handle fixing holes that do not line up without damaging the mounting plate. The reupholstery section covers foam selection, using the old cover as a template, adding wadding for a smoother finish, and the centre outwards stapling method that keeps tension even around corners. We finish with the checks to make once the seat is refitted, including how thicker foam affects leg room, and the clear signs that replacing the whole stool is the better decision....

Continue Reading
How Do You Make Bar Stool Covers?
August 10, 2026

How Do You Make Bar Stool Covers?

Making your own bar stool covers is one of the quickest ways to refresh a kitchen without replacing the seating. The basic method is simple enough for a first sewing project: trace the seat shape, add a seam allowance plus the depth of the pad, cut two pieces and thread elastic through a casing so the cover grips underneath. This guide compares drawcord, fitted and tie on covers so you can pick the approach that suits your seat shape, then explains how to choose a fabric that will survive a busy kitchen rather than wearing through at the edge. It walks through templating, notching curves, adding piping for a crisper edge and finishing the underside with press studs. There is also practical advice on washing, on stopping a cover from twisting, and on covering a seat that cannot be unscrewed from the frame....

Continue Reading
How Do You Clean Bar Stools Different Materials?
August 10, 2026

How Do You Clean Bar Stools Different Materials?

Bar stools sit closer to cooking and everyday spills than most seating, so knowing the right cleaning method for each material makes a real difference to how long they last. This guide covers fabric, real leather, faux leather, timber and metal in turn, explaining which need water, which need almost none and which react badly to common household products. It includes practical fixes for kitchen grease, sticky patches and marked chrome footrests, along with the conditioning and re oiling routines that keep finishes healthy. There is also a short weekly and seasonal maintenance routine, plus the mistakes that cause permanent damage....

Continue Reading
How Do You Clean Bar Stool Seats?
August 10, 2026

How Do You Clean Bar Stool Seats?

Bar stool seats collect more grime than dining chairs because they sit where food is prepared as well as eaten, and the right cleaning method depends entirely on the material. This guide sets out how to clean woven fabric, faux leather, real leather, timber and painted seats without causing damage, including how much moisture each surface can tolerate and why blotting always beats rubbing. It covers dealing with grease, tea rings and sticky handprints, cleaning chrome bases and footrests that quietly gather shoe marks and limescale, and checking fixings while you are underneath the stool. There is also a simple weekly and seasonal routine to follow, plus honest guidance on recognising when a seat has worn past the point where cleaning helps and recovering or replacing makes better sense....

Continue Reading
How Do You Cover Round Bar Stools?
August 10, 2026

How Do You Cover Round Bar Stools?

Recovering a round bar stool is one of the more approachable upholstery jobs, provided you cut the fabric correctly and staple in the right order. This guide walks through removing the seat pad, measuring the circle you need, deciding whether to strip the old cover, and working in opposite pairs so the tension stays even. We also explain how to fan the surplus into small neat pleats, when to replace tired foam and add wadding, and how a simple elasticated slip cover compares with a proper recover. There is guidance on choosing hard wearing fabric for a busy UK kitchen, the mistakes that spoil a finish, and how to judge when a stool is beyond saving. We also cover seats that cannot be removed from the frame, the small finishing touches that make a recover look professional, and why recovering a whole set at once avoids mismatched dye lots in a row of seats....

Continue Reading
How Do You Recover Bar Stools with Backs?
August 10, 2026

How Do You Recover Bar Stools with Backs?

Recovering a bar stool with a back is a realistic weekend project, and the results depend far more on preparation than on upholstery skill. This guide takes you through the full process: dismantling the frame, stripping the old cover to use as a template, assessing whether the foam needs replacing, and cutting new fabric with the right allowances. We explain the centre outwards stapling method that keeps tension even, how to handle rounded and square corners neatly, and why the rear panel of the backrest is the detail that decides whether the finish looks professional. There is also honest guidance on when recovering is not worth the effort, including failed gas lifts, loose joints and the point where fabric costs approach the price of a new set....

Continue Reading
How Do You Cover Bar Stools?
August 10, 2026

How Do You Cover Bar Stools?

Covering a bar stool is one of the most satisfying small jobs in a home, and on a round drop in seat it takes under an hour with a screwdriver, a staple gun, scissors and about half a metre of fabric. This guide explains the difference between a washable slip cover and a permanent recover, and how the construction of your stool decides which route makes sense. You will find a full step by step method for removing the seat board, judging whether to strip the old fabric, replacing flattened foam, setting even tension with four opposing staples and folding neat pleats around the curves. There is guidance on choosing an upholstery weight fabric that survives kitchen life, a simple pattern for an elasticated cover, honest advice on when a stool is not worth recovering, and a short FAQ covering fabric quantities and finishing....

Continue Reading
How Can I Cover Plastic Bar Stools?
August 10, 2026

How Can I Cover Plastic Bar Stools?

Plastic bar stools are hard wearing and easy to clean, but they can look dated and feel cold long before they wear out. This guide sets out four practical ways to change that, starting with stretch fabric covers that pull over the moulded shell and tie on cushion pads that add both comfort and colour. It then explains how to reupholster properly by building a padded plywood panel from a template, choosing suitable foam and fabric, and fixing the finished seat to the stool with or without drilling. For anyone who likes the shape but not the shade, there is a preparation led approach to painting plastic that actually lasts. The article also covers matching the result to the rest of the kitchen, the seat height limits a thick cushion can breach, the structural faults a cover will never fix, and how to care for the finished stools....

Continue Reading