FIF Blog
FIF Blog
mobile logo How Do You Recushion Dining Room Chairs?

upholstery foam Tag

How Do You Recushion Dining Room Chairs?
August 21, 2026

How Do You Recushion Dining Room Chairs?

Recushioning dining chairs replaces tired foam while keeping the existing cover, and it takes about an hour per chair with a screwdriver, staple gun and staple remover. This guide explains how to test whether your foam has actually failed, why high density foam matters far more than thickness, and how to cut clean edges with the right blade. We cover stripping and rebuilding a drop in seat pad, the role wadding plays in a tailored finish, and how to tension a cover so the corners sit flat. There is also advice on checking table clearance after adding foam, keeping a set consistent, and recognising when the geometry of an old chair simply cannot be improved....

Continue Reading
Are Rounded or Square Edged Dining Chair Foam Better?
August 21, 2026

Are Rounded or Square Edged Dining Chair Foam Better?

Rounded foam edges are more comfortable and square edges look crisper, but the honest answer for most dining chairs is a combination of the two. This guide explains why the difference is concentrated almost entirely at the front edge of the seat, where the underside of the thigh rests, and how a hard square corner concentrates pressure into a narrow band that causes aching over a long meal. It also covers the appearance case for square edges, including how they hold contrast piping and geometric patterns cleanly, and how each profile wears over years of use. There is practical guidance on cutting a bevel into existing foam, why density matters more than profile, when to add wadding, and how the decision changes for bar stools and shallow seats....

Continue Reading
Where to Buy Foam for Dining Chairs?
August 20, 2026

Where to Buy Foam for Dining Chairs?

Buying foam for dining chairs is straightforward once you understand that density, not price or thickness, determines how long a seat stays supportive. This guide explains where foam is sold, why specialist suppliers who cut to size usually give the best result, and why craft shop foam intended for cushions fails quickly under daily dining use. We separate density from firmness, since the two are routinely confused, and explain which grades suit seating. There is practical guidance on choosing thickness without compromising table clearance, comparing standard polyurethane against reflex foam, and why memory foam is the wrong choice at a dining table. We cover measuring the timber base rather than the old foam, making templates for shaped seats, cutting cleanly with an electric knife, and the polyester wadding layer most people skip. Storage, outdoor foam and when replacement beats recovering are also covered....

Continue Reading