FIF Blog
FIF Blog
mobile logo How Do You Install Bar Stool Swivel?

swivel stools Tag

How Do You Install Bar Stool Swivel?
August 13, 2026

How Do You Install Bar Stool Swivel?

Fitting a swivel to a bar stool is a short job with one detail that decides the result: centring the plate. This guide walks through the whole process, from checking whether your stool is even a candidate, since a solid flat seat base and a level frame top are needed, through to choosing a plate of the right size and load rating. You will learn how to find the exact centre of a seat, position fixing holes over solid material rather than padding or voids, drill pilot holes to a controlled depth so a screw never breaks through the seat face, and tighten diagonally so the plate sits flat. We also cover fitting a plywood panel across open frame rails, testing under load, curing a squeak safely, and recognising the stools where buying a purpose built swivel design makes more sense than converting....

Continue Reading
How Do You Assemble Swivel Bar Stool?
August 13, 2026

How Do You Assemble Swivel Bar Stool?

Assembling a swivel bar stool follows a predictable order, and knowing that order turns a fiddly job into a quarter of an hour of calm work. This guide covers setting up a workspace that protects chrome and upholstery, identifying the base, column, swivel plate and footring, and fitting the plate the right way up so the column seats properly. It explains why you should start all four seat screws before tightening any of them, how to lock a tapered gas lift joint, and where to set the footring height so it actually gets used. There are clear checks to run before first use, the four mistakes that cause most problems, and practical measurements for matching seat height to a standard UK island or raised breakfast bar....

Continue Reading
How Do You Tighten a Swivel Bar Stool?
August 12, 2026

How Do You Tighten a Swivel Bar Stool?

A swivel bar stool that wobbles or clicks is almost always a maintenance job rather than a fault, and it can usually be resolved in a few minutes. This article walks through diagnosing where the movement actually comes from, then tightening the three places that loosen: the swivel plate bolts under the seat, the centre fixing at the column, and the leg and footrest fixings. We explain why to tighten diagonally rather than in a circle, how to avoid stripping threads in a board seat base, and why worn floor glides cause wobble that no amount of tightening will fix. There is guidance on thread locking compounds, replacing failed threads with inserts, recognising a worn swivel bearing or gas lift, and a simple twice yearly routine....

Continue Reading
How Do You Assemble Adjustable Height Swivel Bar Stool?
August 11, 2026

How Do You Assemble Adjustable Height Swivel Bar Stool?

Assembling an adjustable height swivel bar stool follows the same order almost every time: base to column, column into collar, footrest onto the column, swivel plate to the seat underside, then seat onto the piston. This guide walks through each stage with the details that catch people out, including why the seat feels loose until someone sits on it, why the gas cylinder taper needs no bolt, and why the footrest must be positioned before the seat goes on. It also covers checking bolt lengths, leaving base fixings slack until final alignment, orientating the swivel plate so the lever does not catch knees, tightening in a diagonal pattern, and the routine checks that keep a swivel stool tight through years of daily kitchen use....

Continue Reading
How Do You Make a Swivel Bar Stool Stationary?
August 11, 2026

How Do You Make a Swivel Bar Stool Stationary?

Making a swivel bar stool stationary means fixing the two halves of the mechanism so they can no longer move independently. Two short screws driven through the swivel plate into the seat board is the quickest dependable method, while removing the plate entirely and refitting the seat on a plywood spacer is the permanent one. This guide explains how to identify your mechanism, why diagonal fixings hold better than a single screw, and how to protect your seat height when the plate comes out. We also cover why gas lift stools resist being fixed, the alternatives worth trying first, and how to choose static seating from the outset....

Continue Reading
How Do You Fix Swivel Bar Stools?
August 11, 2026

How Do You Fix Swivel Bar Stools?

Fixing a swivel bar stool usually starts with the simplest checks, because loose fixings cause most wobbles and squeaks. Beyond that, a grinding seat points to a dry or worn swivel plate, while a seat that sinks or refuses to rise means the gas lift cylinder has lost pressure and needs replacing. This guide explains how to diagnose each fault by isolating the movement that causes it, how to tighten a plate into worn timber, how to regrease bearings properly and how to swap a gas cylinder safely. We also look at cracked bases, worn floor glides and the point at which replacing the stool makes more sense than repairing it....

Continue Reading
How Do You Stop Bar Stool from Swiveling?
August 9, 2026

How Do You Stop Bar Stool from Swiveling?

Stopping a bar stool from swivelling comes down to locking or removing the swivel plate hidden between the seat and the base. Depending on how your stool is built, that can mean adding a set screw through the plate, swapping a nylon washer for a locking one, or taking the mechanism out and refitting the seat directly. This guide walks through each method in order of difficulty, explains why gas lift stools behave differently, and shows how to tell a genuine swivel from a stool that has simply worked loose over time. We also look at when a static stool is the better long term answer for a busy family kitchen....

Continue Reading
How Do You Make a Bar Stool Swivel?
August 9, 2026

How Do You Make a Bar Stool Swivel?

A bar stool swivels because the seat is joined to the frame by a bearing plate or a gas lift column, and fitting either one is a job most people can manage at home with basic tools. This guide explains how a swivel mechanism actually works, how to add a swivel plate to a fixed wooden stool, and how to convert a single column stool using a gas lift cartridge instead. It also covers the checks that decide whether a conversion is sensible, including seat height clearance under your worktop, the load path through the fixings, and the seat shapes that turn cleanly without catching on a counter overhang. We finish with maintenance advice to keep the action smooth for years, plus guidance on when replacing the stool makes more sense than modifying it....

Continue Reading
Swivel Bar Stools vs Fixed Bar Stools for UK Kitchens
May 19, 2026

Swivel Bar Stools vs Fixed Bar Stools for UK Kitchens

Choosing between swivel and fixed bar stools is one of the small decisions that shapes how a UK kitchen actually feels day to day. Swivel models bring movement, sociability and gentle support for longer sittings, which suits open plan layouts and family hubs. Fixed stools offer stability, a grounded look and easy maintenance, which works well in compact galley kitchens and traditional interiors. The right choice depends on your routine, your kitchen size and the style of the room. In this guide we compare both options across comfort, materials, maintenance and visual weight, with practical tips for British homes. Whether you favour rotation or a settled silhouette, you can browse the full range at Furniture in Fashion to find a finish that complements your worktops, cabinetry and breakfast bar height....

Continue Reading