FIF Blog
FIF Blog
mobile logo How Do You Cut the Legs on a Bar Stool?

stool height Tag

How Do You Cut the Legs on a Bar Stool?
August 12, 2026

How Do You Cut the Legs on a Bar Stool?

Shortening bar stool legs is straightforward with the right preparation, and almost every failure comes from marking rather than cutting. This guide covers how to work out exactly how much to remove using your counter height and compressed seat height, and how to check first whether the stool can be cut at all: footrest position, leg taper and splay, joint locations and construction type all set limits, and a gas lift column cannot be shortened. It then walks through marking a square line on round and square legs, taping to prevent chipping, cutting timber with a fine tooth saw and tubular metal with a hacksaw or pipe cutter, and finishing the ends properly. Levelling advice, rust prevention on cut steel and the alternatives worth considering before reaching for a saw are included....

Continue Reading
What Bar Stool Height Do I Need?
August 12, 2026

What Bar Stool Height Do I Need?

Choosing bar stool height comes down to one calculation: measure from the floor to the top of your counter and subtract 28cm to find the seat height you need. This guide explains why that figure works, drawing on the 25cm to 30cm gap that lets an adult sit with thighs level and forearms resting comfortably on the surface. We set out the three height categories in detail, covering counter height seats for 90cm worktops, bar height seats for breakfast bars of 100cm to 110cm, and extra tall seats for poseur tables and fitted home bars. There is practical advice on the complications that catch people out, including shallow overhangs, brackets and bins fitted beneath the counter, and the importance of a footrest once your feet leave the floor. A checklist and short FAQ close the guide....

Continue Reading
How Tall Is the Average Bar Stool?
August 12, 2026

How Tall Is the Average Bar Stool?

The average bar stool in the UK has a seat height of around 65cm, a figure that comes directly from the standard 900mm fitted kitchen worktop found in most British homes. This guide explains why that height became the default, then sets out the full range you will encounter from low vanity stools through counter height and bar height to commercial extra tall designs. It also covers how seat height is measured and why padded seats sit slightly lower in use, the three situations where buying the average goes wrong, why footrest position and seat depth matter more as height increases, and how total height differs from seat height....

Continue Reading
Are Bar Stools a Standard Height?
August 9, 2026

Are Bar Stools a Standard Height?

Bar stools do not come in one standard height. They fall into three recognisable bands: counter height at roughly 60cm to 65cm for standard worktops, bar height at 70cm to 76cm for raised breakfast bars, and extra tall stools at 80cm and above for true bar counters. This guide explains how to place your own surface in the right band using a single subtraction, why finished floor level and worktop thickness change the answer, and how seat depth, width and footrest position affect comfort once height is settled. It also covers when a gas lift stool is the sensible route, when a fixed height design is the better choice, and the measuring mistakes that lead to unused seating....

Continue Reading