Small Bedrooms Tag

Which Size Better for Bed Room?

Which Size Better for Bed Room?

Choosing a bed size is really a question about clearance rather than square metres. The best size for a bedroom is the largest one that still leaves around 60cm of clear floor where you walk and enough room for wardrobe doors to open fully. This guide sets out all six UK bed sizes with their measurements, then matches them to real British room dimensions from box rooms through to large main bedrooms. We also cover how much a bed frame and headboard add to the mattress footprint, how ottoman and divan storage changes the decision, layout ideas for chimney breasts and loft rooms, and the measurements to take before you order anything. We close with advice on buying for how long you plan to stay in the property, the honest trade off between sleeping comfort and usable floor space, and a simple masking tape test that shows you the real footprint before you commit to anything....

How Long Is a Standard Single Bed?

How Long Is a Standard Single Bed?

A standard single bed in the UK is 190cm long and 90cm wide, roughly 6ft 3in by 3ft, and that 190cm length has been the British standard for decades. This guide covers the exact measurements alongside the variations you may meet, including extra long singles at 200cm and shorter children's cabin beds. We explain why the frame always runs longer than the mattress and why that matters in alcoves and box rooms, how much clear floor space to allow for access and drawer clearance, and whether a standard single is long enough for a tall adult or a growing teenager. Also covered: frame styles for children's rooms and guest rooms, under bed storage options ranked by capacity, mattress support requirements, and practical ways to make a narrow single bedroom feel larger....

What Is a Trundle on a Bed?

What Is a Trundle on a Bed?

A trundle is a second mattress base that hides beneath a main bed and slides out when an extra sleeper arrives. It rolls on castors or runners, takes a slimmer mattress than the bed above, and disappears entirely during the day, which is why it suits tight British bedrooms so well. In this guide we explain how the mechanism works, the mattress depths a trundle will accept, and how much clear floor you need in front of the bed before the idea becomes practical. We compare trundles with bunk beds and sofa beds so you can see which arrangement suits your household, then cover the smaller details that decide whether a pull out base gets used or ignored: castors on carpet, frame bracing, airflow through slats, and somewhere sensible to keep the second set of bedding....

What Are the Measurements of a Single Bed?

What Are the Measurements of a Single Bed?

A standard single bed in the UK measures 90cm wide by 190cm long, though the frame itself adds a few centimetres on each side. This guide sets out the exact measurements you need before ordering, including small single and long single variations, the difference between mattress size and frame footprint, and how much floor space a single bed genuinely requires in a typical British box room. We look at frame styles that suit narrow spaces, storage options that reclaim the volume beneath the bed, mattress depth and its effect on fitted sheets, and the three room measurements worth taking before you commit. There is also practical advice on getting a bed frame up a stairwell and a short set of questions on twin sizes, shared use and slatted bases....

What Is the Standard Size for a Single Bed?

What Is the Standard Size for a Single Bed?

A standard single bed in the UK measures 90cm wide by 190cm long, or 3ft by 6ft 3in, and that figure always refers to the mattress rather than the frame. This guide explains the difference between mattress and frame measurements, then looks at the small single at 75cm wide and the long single at 200cm for taller sleepers. It covers how to measure a box room properly, how much walking space to leave around the bed, and why the combined height of base and mattress matters more than either figure on its own. We also look at frame styles that suit tight rooms, mattress depth and bedding fit, and the slim bedside cabinets, drawers and storage bases that make a single bedroom work day to day, along with clear answers to the questions we hear most often....

How Wide Is a Standard Single Bed?

How Wide Is a Standard Single Bed?

A standard single bed in the UK measures 90cm wide by 190cm long, which is the same as the older 3ft description still used in many listings. The frame itself usually adds a few centimetres to that figure, so most single beds need around one metre of wall space in practice. This guide explains where the 90cm standard came from, how frame width differs from mattress width, and how much circulation space a single bed genuinely needs in a typical British box room. It also covers bedding sizes that fit a 90cm mattress, sitting height and mattress depth, under bed storage options, and the point at which a small double becomes the more sensible choice. Practical measuring advice and access considerations for narrow stairs and loft rooms are included throughout....

How Deep Is a Standard Wardrobe?

How Deep Is a Standard Wardrobe?

A standard wardrobe measures around six hundred millimetres deep, and this guide explains why that figure exists, what it means in practice and when it is worth departing from it. The measurement follows the clothes hanger rather than the room, allowing garments to hang square without pressing against the door, and going shallower without adjusting the rail is the most common cause of creasing and doors that will not close. It covers the gap between quoted external depth and usable internal depth, how handles and sliding door tracks affect the figure, and when a shallow unit with a front to back or pull out rail is the sensible compromise in a box room. Further sections set out standard heights and widths for context, appropriate depths for children's rooms, and a practical method for measuring your own space including skirting, door swing and marking the footprint on the floor....

How Big Should My Wardrobe Be?

How Big Should My Wardrobe Be?

A wardrobe should be around 600mm deep, tall enough to use the room's height without touching the ceiling, and wide enough to give each adult 900mm to 1200mm of hanging rail. This guide explains why depth is the one fixed figure, set by the width of a coat hanger rather than the size of the room, and when a shallower front to back rail is a sensible compromise. We cover choosing a height that accounts for reach, the carcass diagonal and sloping ceilings, plus a ten minute method for working out the width you genuinely need from your existing clothes. There is guidance on the clearance a hinged door requires, the walkway a bedroom needs to stay comfortable, and specific advice for main bedrooms, box rooms, guest rooms and children's rooms. We close with a short checklist to run through before ordering....

How Deep Wardrobe Should Be?

How Deep Wardrobe Should Be?

A wardrobe should be around 600mm deep externally, and there is a clear reason for it: a standard clothes hanger measures 430mm to 450mm across and needs to sit square on the rail with clearance behind the garment and in front for the door. This guide explains how that figure is arrived at, what goes wrong at 500mm or 450mm, and why sliding wardrobes need 650mm to 700mm to leave the same usable interior. We also look at when going deeper is worthwhile, how shelving and shoe storage need less depth than hanging, and how depth interacts with walkways and door swing in small UK bedrooms, with practical checks to make before ordering....

How Do You Convert Airing Cupboard into Wardrobe?

How Do You Convert Airing Cupboard into Wardrobe?

An airing cupboard is often the most underused storage in a UK home, and converting it into hanging space can free an entire wall in a small bedroom. The project itself is simple: strip out the slatted shelves, sort out the walls and floor, fit a rail at the right height and add shelves above. What decides the job is the plumbing, so this guide explains how to approach a cupboard where the cylinder has gone and how to work around one that has to stay, including insulation and removable access panels. We cover setting rail height by garment drop, fitting a front to back rail in a shallow cupboard, fixing sockets into timber battens rather than plasterboard, adding lighting without wiring, and why ventilation matters more here than in any other wardrobe....