sliding wardrobe doors Tag

How Much Do Sliding Wardrobe Doors Cost?

How Much Do Sliding Wardrobe Doors Cost?

Sliding wardrobe doors cost noticeably more per panel than hinged doors, and the reason is straightforward: each panel is larger, and it depends on a track system that has to keep working smoothly for years. This guide sets out realistic UK figures for board, wood effect, mirrored and glass panels, explains what the track adds and why a soft close top hung system costs more than a basic bottom rolling one, and covers typical fitting charges. It also shows how to measure an opening properly, including the floor and ceiling checks that catch problems before panels are ordered, and looks at when replacing doors on an existing carcase stops making financial sense against a complete new wardrobe. We finish with the small maintenance habits that keep the doors gliding....

How Do I Fit Sliding Wardrobe Doors?

How Do I Fit Sliding Wardrobe Doors?

Sliding wardrobe doors run smoothly for years when the tracks are right and fight you forever when they are not, which is why almost all of this job happens in the first ten minutes. This guide takes you through the sequence in order: checking the opening in three places, levelling and shimming the bottom track, plumbing the top track directly above it rather than measuring down from a sloping ceiling, then hanging the rear door before the front. We explain how to set the roller adjustment to an even closing gap, and how two simple symptoms diagnose nearly every fault, a door that drifts open and a door that binds halfway. There is also guidance on the internal depth sliding channels consume, the mistakes worth avoiding, and when a ready made unit is the more sensible choice....

Can You Replace Mirror Sliding Wardrobe Doors?

Can You Replace Mirror Sliding Wardrobe Doors?

Mirror sliding wardrobe doors can usually be replaced without dismantling the wardrobe at all, because sliding panels hang from rollers in a track rather than being fixed to the carcass. This guide explains how to identify whether your doors are top hung or bottom rolling, since that single distinction determines what replacement panels will fit, and lists the four measurements to take before ordering: panel height and width, panel thickness, track profile and roller centres. It covers removing a heavy mirrored panel safely with two people and why a large mirror must always be carried vertically rather than flat, then how to clean and check the tracks before fitting the new door and adjust the height screws so the gaps run parallel. There is also guidance on recognising when worn rollers or a distorted track are the real fault, options for switching to non mirrored panels, and how to dispose of old mirror glass correctly....