safety standards Tag

Bed Guards & Rails: UK Safety Standards & Entrapment Guidance

Bed Guards & Rails: UK Safety Standards & Entrapment Guidance

Furniture in Fashion sets out the two facts that govern bed guard safety in UK homes: the guard exists to prevent falls, and the risk it introduces when fitted badly is entrapment. BS 7972 is the British Standard covering children's bed guards, setting safety requirements and test methods, and the widely stated age guidance is that guards are unsuitable for children under eighteen months, who should remain in a cot. Our analysis argues that gaps matter more than guard height: the space between guard and mattress, and between guard and headboard or footboard, are the openings that must be eliminated on fitting. Mattress depth is the overlooked variable, because guard height is effective above the sleeping surface rather than the frame, so changing a mattress or adding a topper changes the protection. We also explain why top bunks must rely on integral rails, and why bedding depth should be checked with the bed made....

A Brief History of the Cot: From Cradle to Cot Bed

A Brief History of the Cot: From Cradle to Cot Bed

The cot is a safety object before it is a piece of furniture, and Furniture in Fashion's 2026 report traces how each of its defining features records a risk that was designed out. The rocking cradle gave way not to fashion but to the requirement for a firm flat sleeping surface set out in the Lullaby Trust's safer sleep guidance, surviving today as the bedside crib. Vertical slats, controlled spacing, low corner posts and a supported base all answer specific hazards, and BS EN 716 is the British Standard covering cots and folding cots for domestic use. Drop sides disappeared because a moving side is a mechanism that can fail, replaced by adjustable base height. The cot bed, meanwhile, is a response to small British bedrooms rather than to sleep science. The report includes standard UK mattress sizes by format and practical nursery placement guidance....

UK Bed Frame Safety Standards Explained: BS EN 1725 & Fire Regulations

UK Bed Frame Safety Standards Explained: BS EN 1725 & Fire Regulations

Two separate regimes govern bed safety in the UK and they are routinely confused, according to a new explainer from furniture retailer Furniture in Fashion. Fire safety is mandatory under the Furniture and Furnishings (Fire) (Safety) Regulations 1988, which bring upholstered bed bases and headboards within scope and require permanent compliance labelling, with BS 7177 ordinarily used to demonstrate ignitability performance for mattresses, divans and bases. Structural safety, by contrast, rests on voluntary standards. The report clarifies that BS EN 1725, still widely cited in product listings, has been withdrawn from the British Standards catalogue, with test methods now addressed through BS EN 1957. It also sets out the stricter regime for bunk beds under BS EN 747 and the Bunk Beds (Entrapment Hazards) (Safety) Regulations 1987, and warns that fitting an over deep mattress can defeat guard rail protection entirely. Further guidance covers weight ratings, slat spacing and what to check on a compliance label before buying....

Tempered Glass Coffee Tables: BS EN 12150 Safety Standards Explained

Tempered Glass Coffee Tables: BS EN 12150 Safety Standards Explained

Toughened glass is not unbreakable, it is designed to fail safely, and that distinction explains almost everything about how a glass coffee table should be chosen and cared for. This 2026 report from Furniture in Fashion explains BS EN 12150, the British and European standard for thermally toughened soda lime silicate safety glass, and the heating and rapid cooling process that places the surfaces in compression and the core in tension. We set out why the flat surface is the strong part and the edges and corners are the vulnerable ones, why a chip is a permanent breach that cannot be repaired, and why toughened glass can never be cut or drilled after treatment. The report compares annealed, toughened, laminated and back painted glass, examines how thickness controls deflection across unsupported spans, and gives practical guidance on support pads, frame fixings and everyday care....

Glass Side Tables: Edge Finish Types and UK Safety Standard Compliance

Glass Side Tables: Edge Finish Types and UK Safety Standard Compliance

The edge finish on a glass side table is a manufacturing quality signal as much as a design choice, according to a new editorial analysis published by Furniture in Fashion. The report distinguishes arrised, flat ground, flat polished, pencil polished and bevelled edges, matching each to glass thickness and to the position a table occupies in a room. It also corrects a common retail claim: BS EN 12150 covers thermally toughened safety glass as a material, while BS EN 12600 and Building Regulations glazing provisions govern windows, doors and screens rather than furniture, which falls under general product safety requirements. Because toughened glass cannot be cut or ground after heat treatment, all edge work happens before toughening and edge chips cannot be repaired. The analysis sets out practical checks buyers can make in the room and contains no invented test data....

Nursery Furniture Warranty and Lifespan Data: A UK Benchmark

Nursery Furniture Warranty and Lifespan Data: A UK Benchmark

Nursery furniture is bought for months and kept for years, and Furniture in Fashion's 2026 report explains why the fittings, not the structure, decide whether it survives. Cam and dowel fixings lose grip each time a cot is dismantled and rebuilt, while bolted hardwood frames with metal to metal fixings accept several cycles, and bent or missing mattress base brackets are among the commonest reasons a cot is scrapped. The report is clear that no published UK benchmark of nursery warranty lengths or measured lifespans exists, so it quotes none. Instead it sets out what is on record: BS EN 716 for cots, BS EN 1130 for cribs, BS EN 12221 for changing units, the satisfactory quality requirement of the Consumer Rights Act 2015, and the standard UK mattress sizes of about 120 cm by 60 cm and 140 cm by 70 cm that make replacement straightforward and a safe, gap free fit achievable....