FIF Blog
FIF Blog
mobile logo How Do You Build a Wardrobe from Scratch?

joinery Tag

How Do You Build a Wardrobe from Scratch?
August 14, 2026

How Do You Build a Wardrobe from Scratch?

Building a wardrobe from scratch comes down to making an accurate box, fixing it securely and fitting it out well. This guide follows the full sequence for a UK home: measuring an out of square room and setting sensible dimensions, choosing between eighteen millimetre MDF and birch plywood, planning cuts from full sheets, and cutting straight over two metre lengths with a circular saw and a clamped straight edge. You will learn why the back panel is what keeps a carcass square for years, how to check squareness by measuring diagonals, why a full height unit must be fixed to the wall, and how to plan an interior that doubles hanging capacity with split rails. There is also guidance on supporting rails and shelves against sag, hinge counts for tall doors, clearance gaps, sliding door weight limits, and priming every face to prevent bowing....

Continue Reading
How Do You Build a Frame for Wardrobe Doors?
August 13, 2026

How Do You Build a Frame for Wardrobe Doors?

Building a frame for wardrobe doors comes down to accuracy: a head plate, a sole plate and two vertical stiles, all squared and plumbed before anything is hung. This guide walks through choosing between a face frame and a recessed frame, surveying an out of square opening the way real UK houses present them, and assembling and packing the frame so it stays square even when the wall leans. It covers the clearances hinged and sliding doors each need, hinge quantities by door height, cladding and caulking for a joinery quality finish, and planning the interior rails and shelves before the space is closed in. Common failures such as sagging head plates and forgotten carpet height are covered too....

Continue Reading
How Do You Build a Wardrobe Door?
August 13, 2026

How Do You Build a Wardrobe Door?

Building a wardrobe door comes down to two things: an accurate opening measurement and the right clearance gaps. This guide covers both constructions used in UK homes, the simple slab door made from an edged sheet of MDF or plywood, and the frame and panel shaker door built from stiles, rails and a floating centre panel. You will learn how to measure an out of square carcass, which materials stay flat and which move with humidity, how to cut and edge a panel cleanly, how to route grooves for a floating panel, and how many concealed hinges a full height door actually needs. There is also guidance on building a sliding door, weight ratings for sliding gear, sensible interior layouts, finishing steps that prevent bowing, and the handful of mistakes that ruin most first attempts....

Continue Reading
How Do You Build a MDF Wardrobe?
August 13, 2026

How Do You Build a MDF Wardrobe?

Building an MDF wardrobe is well within reach for a confident home woodworker, provided the setting out is done before any panel is cut. This guide works through the sequence a joiner would follow: planning depth and door widths around the garments you actually own, choosing between standard and moisture resistant board, finding the highest point of the floor and setting level and plumb reference lines, then cutting and joining an 18mm carcass with glue and confirmat screws, dowels or pocket holes. It explains how to check the frame for square using diagonal measurements, how to scribe filler strips to an out of true wall, where to place rails and adjustable shelves, and why sealing the cut edges twice is what separates a crisp painted finish from a fuzzy one. Hinge selection, reveal adjustment and the three faults that spoil most home built units are covered too, along with when a ready made unit is the better decision....

Continue Reading
How Do You Make Wood Bar Stools?
August 11, 2026

How Do You Make Wood Bar Stools?

Making a wooden bar stool is a realistic first furniture project, provided the joinery is taken seriously, because four slender legs carry a person's full weight. This guide covers timber selection and why pine is a poor choice for legs and rails, how to calculate leg length from your worktop height, and the leg section and rail positions that give a stable, comfortable seat. It explains marking and cutting mortise and tenon or dowelled joints, then a staged glue up that avoids the panic of assembling everything at once. There is guidance on fixing a seat so timber movement does not split it, hardwax oil finishing, and an honest look at where building your own makes sense....

Continue Reading