FIF Blog
FIF Blog
mobile logo How Do You Clean a Wardrobe?

home maintenance Tag

How Do You Clean a Wardrobe?
August 13, 2026

How Do You Clean a Wardrobe?

Cleaning a wardrobe properly takes less time than most people expect, provided you work in the right order. This guide explains why wardrobes collect dust and moisture even when the doors stay shut, what cleaning kit genuinely helps and what to avoid, and how to work through a full clean from emptying the unit to ventilating it before you reload. It covers the different care needed for solid wood, high gloss, melamine and mirrored finishes, practical ways to shift a musty smell for good, how to treat scuffs, sticky residue and early mould, and the moth prevention steps most people skip. A simple weekly, monthly and seasonal routine keeps everything in good order without another deep clean....

Continue Reading
How Do You Lower a Bar Stool?
August 12, 2026

How Do You Lower a Bar Stool?

Lowering a bar stool depends entirely on its mechanism, and identifying that comes first. A gas lift stool needs weight on the seat while the lever is held, because body weight is what pushes the cylinder down: this is why so many stools seem to rise but never descend. A threaded stool lowers by spinning the seat clockwise, and a fixed stool has no adjustment at all. This guide covers each case, plus what to do when the lever moves but nothing happens, why a sinking cylinder cannot be repaired and how a clamp can hold one at a set height, how to calculate the seat height your counter actually needs, and a reliable way to get a whole set matching....

Continue Reading
How Do You Fix Bar Stool?
August 12, 2026

How Do You Fix Bar Stool?

Bar stools work harder than most seating, carrying full weight on a small base while being spun, leaned on and pushed with a foot, so occasional repairs are normal rather than a sign of poor quality. This guide takes a methodical approach, starting with diagnosis so you are not dismantling a stool unnecessarily, then working through fixings, wobbles, gas lifts, swivel plates and frame joints in order of likelihood. We explain how to repair a stripped screw hole properly with a hardwood dowel rather than filler, how to identify a replacement gas cylinder by diameter and stroke, and when a swivel plate has worn beyond greasing. There is guidance on timber cracks that can be glued and those that cannot, plus seat and upholstery repairs. We finish with two simple habits that prevent most faults and clear signs that replacement is the safer decision....

Continue Reading
How Do You Dismantle a Bar Stool?
August 12, 2026

How Do You Dismantle a Bar Stool?

Dismantling a bar stool is straightforward once you know which kind you are dealing with, and the first job is telling a flat pack design from a glued frame that was never meant to come apart. This guide works through the sequence in reverse assembly order, starting with removing the seat and its plate, then tackling the stage most people struggle with: releasing a gas lift cylinder held by a tight friction taper. It sets out the safe method using a rubber mallet and penetrating oil, along with clear warnings about never cutting or puncturing a pressurised cylinder. There is separate guidance for four leg timber stools, including why loosening every fixing before removing any of them matters, plus practical advice on reassembly, seating the taper properly and deciding when a simple glue repair beats taking the whole thing apart....

Continue Reading
How Do You Take Apart Adjustable Bar Stool?
August 11, 2026

How Do You Take Apart Adjustable Bar Stool?

Adjustable bar stools come apart in four stages, and doing them in the right order turns an awkward job into a twenty minute one: seat first, then the gas cylinder, then the footrest, then the base. The cylinder is the part that stops most people, because it is held by a friction taper rather than a thread, so twisting at the base achieves nothing. This guide explains how to pull it free using straight axial pressure, a rubber mallet on the housing, penetrating oil on corroded joints and a pipe wrench as a last resort. It also covers threaded stools, why body weight rather than a hammer should seat a cylinder on reassembly, safe handling of pressurised struts, and how to pack the parts so the stool actually gets rebuilt....

Continue Reading
How Do You Clean Chrome Bar Stool Base?
August 11, 2026

How Do You Clean Chrome Bar Stool Base?

A chrome bar stool base needs gentler cleaning than most people give it, because the plating is only microns thick and nearly all damage comes from over enthusiastic scrubbing. This guide sets out a simple routine: warm soapy water on a microfibre cloth followed by immediate drying, diluted white vinegar for hard water spotting, and aluminium foil dipped in water for light surface rust. It explains why the drying step matters so much in British hard water areas, which products to keep well away from chrome including bleach based bathroom sprays and cutting polishes, and how to treat leather and fabric seats at the same time. Prevention advice covers splash zones, felt pads and loose fixings, with a straightforward weekly, monthly and twice yearly schedule....

Continue Reading
How Do You Stop Bar Stools from Scratching Floor?
August 11, 2026

How Do You Stop Bar Stools from Scratching Floor?

Scratched floors around a kitchen island are rarely the fault of the stool itself. The real culprit is grit trapped between the foot and the floor, and understanding that changes how the problem is solved. This guide starts by identifying what actually touches your floor, from bare metal tube ends on gas lift bases to square cut timber legs, then matches the right protector to engineered timber, laminate, vinyl, tile, stone, polished concrete and carpet. It explains why pads fail, how to prepare and fit them so they stay put, and the maintenance routine that keeps them working. There is also advice on the design features that reduce floor wear naturally, including swivel seats, proper footrests and backless stools that tuck away, plus guidance on rugs and repairing existing surface marks....

Continue Reading
How Do You Dismantle a Telescopic Bar Stool?
August 11, 2026

How Do You Dismantle a Telescopic Bar Stool?

Telescopic bar stools come apart with a mallet and a wrench rather than a screwdriver, because both ends of the gas lift column are held by a friction taper instead of a thread. This guide explains that construction first, then works through the sequence in order: releasing the footring collar, separating the seat by twisting against the column while tapping the seat plate, and freeing the base by working around the socket rather than striking one point. We cover the tools that protect chrome, why the reassembly order differs from the dismantling order, and why you should sit on the finished stool once to lock both tapers. There is also advice on replacing a failed cartridge while the stool is open, safe disposal, and packing dismantled parts for a house move....

Continue Reading
How Do You Fix a Broken Bar Stool?
August 11, 2026

How Do You Fix a Broken Bar Stool?

Most broken bar stools can be brought back into service at home with basic tools and a little patience. Wobbles are nearly always loose fixings that need tightening in a diagonal pattern, a seat that sinks under weight points to a failed gas lift cartridge that can be swapped out, and loose timber joints respond well to glue and a clamp once the old adhesive is cleaned away. This guide walks through each of those repairs in order, along with recovering a worn seat pad, replacing collapsed foam, patching leather and dealing with loose footrests and missing feet. It also sets out the point at which repair stops being sensible, since a bent column or cracked base is a safety matter rather than a maintenance job, and finishes with simple checks that keep a set of stools sound....

Continue Reading
How Do You Fix a Wobbly Wooden Bar Stool?
August 10, 2026

How Do You Fix a Wobbly Wooden Bar Stool?

A wobbly wooden bar stool is almost always caused by one of four things: loose fixings, dried out joints, uneven feet or a seat plate that has worked free. This practical guide walks through diagnosing the movement before you touch a tool, then tightening bolts in the correct sequence so the frame stays square, reglueing dowel and mortice joints properly, and packing out a joint that has gone slack as the timber shrank. We also explain how to level a stool on an uneven British floor, how to plug a stripped screw hole so the seat holds firmly again, and the maintenance habits that stop wobbles returning. Finally we cover the point at which a repair stops being worthwhile, since seating that fails under load at seat height is a safety matter rather than an annoyance....

Continue Reading