FIF Blog
FIF Blog
mobile logo How Do You Dismantle a Gas Lift Bar Stool?

furniture repair Tag

How Do You Dismantle a Gas Lift Bar Stool?
August 14, 2026

How Do You Dismantle a Gas Lift Bar Stool?

Gas lift bar stools come apart more easily than most people expect, provided you know that the cylinder joints are tapered friction fits rather than threads. This guide explains the four main assemblies, the tools worth having to hand, and a clear order of work: removing the seat bolts, separating the cylinder from the base, then releasing the upper swivel plate. We cover what to do when a taper has seized after years of use, why penetrating lubricant and even mallet taps work where force does not, and why heat must never be applied to a pressurised cylinder. There is guidance on safe handling and disposal, measuring for a replacement cylinder, and reassembling so both tapers seat correctly under your own weight. We also cover the simpler approach for house moves and when repair stops being economic. Reassembly order is explained step by step, together with the correct way to dispose of a pressurised gas cylinder at a recycling centre....

Continue Reading
How Do You Adjust a Wardrobe Door Hinge?
August 14, 2026

How Do You Adjust a Wardrobe Door Hinge?

Adjusting a single wardrobe door hinge is a quick job once you know which screw controls what and how to read the gap around the door. This guide starts with diagnosis, using the shape of the gap to identify which hinge needs work, then explains side, height and depth adjustment in turn, including the doors that swing open and the faces that sit proud of their neighbours. It also covers worn screw holes in board, why an unlevel carcass causes doors to drift out of line repeatedly, how sliding door rollers differ, and the point at which a hinge needs replacing rather than adjusting....

Continue Reading
How Do You Fix a Broken Bar Stool Leg?
August 13, 2026

How Do You Fix a Broken Bar Stool Leg?

Whether a broken bar stool leg is worth repairing depends almost entirely on the direction of the break. This guide explains how to read a failure, why a clean split along the grain glues back stronger than the surrounding timber while a cross grain break needs mechanical reinforcement, and how to work adhesive into the full depth of a crack before clamping it overnight. It covers dowel reinforcement, rebuilding a snapped tenon inside the seat frame, what can and cannot be done with bent or cracked metal legs, the point at which bar height seating makes repair unwise, and the everyday habits that cause most leg failures....

Continue Reading
How Do You Adjust Wardrobe Hinges?
August 13, 2026

How Do You Adjust Wardrobe Hinges?

Almost any misaligned wardrobe door can be corrected in about ten minutes with one screwdriver, provided you know which screw does what. This guide explains the three adjustments on a standard concealed European hinge: side to side for the gap between doors, depth for how the door sits against the carcass, and height for lining the door up with the top of the unit. It starts with diagnosis, since reading the gaps properly tells you which screw to turn, and stresses working in quarter turns rather than full ones. There is a recommended order to follow because height adjustment affects the other two, along with a warning about supporting heavy doors so the screws do not strip out of the chipboard. The article also covers the situations adjustment cannot solve, including an out of square carcass, an uneven floor, stripped fixings, bent arms and failed dampers, plus how to prevent alignment drift at assembly....

Continue Reading
What to Do with Old Bar Stools?
August 13, 2026

What to Do with Old Bar Stools?

Tired bar stools rarely need to go straight to the tip. This guide sets out five practical destinations for them and helps you choose between them by answering one question first: is the frame still sound? We cover the quick repairs that restore most stools, including tightening fixings, renewing floor glides and replacing a failing gas cylinder, then walk through reupholstering a seat pad and repainting timber or metal frames with the right primer. For stools that are no longer comfortable to sit on, we suggest ways their height becomes an advantage elsewhere, from plant stands and narrow bedside tables to potting stools. There is advice on selling or donating sound stools, including the details buyers actually look for, plus how to separate timber, metal and foam properly for recycling, and how to measure your counter again before replacing anything....

Continue Reading
How Do You Remove Bar Stool Base?
August 13, 2026

How Do You Remove Bar Stool Base?

Removing a bar stool base is mostly about understanding that the gas lift column is held in place by a friction taper rather than any hidden fixing. This guide explains how the parts fit together, how to unbolt the seat for clear access, and how to release the base using controlled rubber mallet blows to the hub or a twisting pull with a pipe wrench when the taper has seized. It also covers the safety rules around pressurised cylinders, dismantling bolted and glued four legged stools, refitting a base so the taper seats properly under your own weight, and recognising when a cracked or bent base is no longer safe to reuse....

Continue Reading
How Do You Adjust Wardrobe Door Hinges?
August 13, 2026

How Do You Adjust Wardrobe Door Hinges?

Concealed wardrobe hinges adjust in three directions: the screw nearest the door face moves it sideways, the rear screw sets how close it sits to the carcass, and loosening the mounting plate lets the door slide up or down. Work in quarter turns, closing the door between each one, and always start with the top hinge because it carries the visible upper line. This guide matches each fault to its cure, covering doors that sag at the outer edge, uneven vertical gaps between a pair, and doors that spring back rather than closing flush. It also identifies the problems hinges cannot fix, including an unlevel floor or a racked carcass, and shows the proper five minute repair for a stripped chipboard screw hole. It also explains why a door should be hung and adjusted before handles are fitted, and how to keep a pair of doors reading as a matched set across the front of the wardrobe....

Continue Reading
How Do You Adjust Wardrobe Doors That Are Uneven?
August 13, 2026

How Do You Adjust Wardrobe Doors That Are Uneven?

Uneven wardrobe doors look like a serious fault and are usually a ten minute fix with a single screwdriver. This guide starts with diagnosis, showing how to read the four common gap patterns and what each one tells you, then explains why levelling the carcass and checking the back panel must come before any hinge is touched. It describes the three adjustments available on a concealed European hinge, the correct order in which to make them, and how to rotate a tilted door by working the top and bottom hinges in opposition. There is guidance on the 2mm to 3mm reveal to aim for and how to gauge it with card rather than by eye, along with the faults that hinges cannot cure: a sagging rail bowing the sides, a stripped screw hole in chipboard, and doors swollen by damp. Sliding door roller adjustment is covered separately, with the annual checks that keep hinged doors hanging true....

Continue Reading
How Do You Adjust Hinges on a Wardrobe?
August 13, 2026

How Do You Adjust Hinges on a Wardrobe?

Concealed wardrobe hinges have three adjustment screws and each moves the door in a different direction, which makes most alignment problems a five minute job with a single screwdriver. This guide identifies the hinge types you are likely to find, explains what the side, height and depth screws actually do, and sets out the order to work in so corrections do not undo each other. It also covers the usual complaints, doors that will not stay shut, doors rubbing in the middle and doors that have dropped, along with the cases where the real cause is an unlevel carcass or worn screw holes rather than the hinge itself....

Continue Reading
How Do You Remove Gas Lift from Bar Stool?
August 13, 2026

How Do You Remove Gas Lift from Bar Stool?

Removing a gas lift from a bar stool is simpler than it looks, because nothing is screwed together. Both ends sit on friction tapers, so the base plate taps off the bottom of the cylinder and the seat mechanism taps up off the top. This guide walks through the whole job with a rubber mallet and a little penetrating oil, including how to free a joint that has corroded after years of kitchen humidity. It explains the four measurements you must take before ordering a replacement cylinder, why body weight seats a new one better than hammering, and how to check whether the base plate and swivel bearing are still sound. It also covers the one safety rule that matters, safe disposal of a pressurised cylinder, and when a fixed height stool is the better answer....

Continue Reading