Bedroom Storage Tag

How Do You Cut down Your Wardrobe?

How Do You Cut down Your Wardrobe?

Cut down your wardrobe by emptying it completely, sorting by category rather than by shelf, and judging each item against how you actually dressed over the past twelve months rather than how you imagine dressing. Most declutters fail because they only skim the obvious mistakes off the rail, clearing a fraction of the volume and none of the confusion. This guide sets out a full working method: preparing four destinations and working in daylight, a running order that starts with easy decisions and leaves occasion wear until last, and the five specific questions that make each call quick. It also handles expensive mistakes, sentimental pieces and genuine indecision, then covers putting clothes back properly and the habits that keep the wardrobe at a sensible size. There is advice on what to do with the pieces you pass on, and on the monthly check that stops the wardrobe filling back up within a single season....

How Do You Completely Redo Your Wardrobe?

How Do You Completely Redo Your Wardrobe?

Completely redoing a wardrobe works best as a structured reset rather than a tidy up, and this guide sets out the seven stages in the order that actually works. It begins with emptying the wardrobe entirely, because you cannot judge what you own while half of it is hidden, then moves through honest sorting into keep, repair, pass on and discard using a test that cuts through hesitation. It covers the maintenance checks that are quick on an empty wardrobe and awkward on a full one, from damp and bowed rails to dropped hinges and clogged sliding tracks, and the point at which replacement is the better use of effort. From there it explains how to plan zones by reach and garment type, why matching hangers gain real capacity, how to fold and file knitwear properly, where to send overflow, and the small habits that keep it working....

How Do You Build a Built-in Wardrobe from Scratch?

How Do You Build a Built-in Wardrobe from Scratch?

Building a built in wardrobe follows a fixed order, and the two stages that decide the outcome come early: a genuinely level base and a plumb, planar frame. This guide walks through surveying a room honestly, measuring width and height at three points because few UK rooms are square, and designing the internal layout before the box that surrounds it. We cover fixing a sole plate with shims, framing with noggins wherever fixings will later land, scribing cladding to undulating plaster so the unit reads as joinery rather than an addition, and setting adjustable shelf supports and rails accurately. There is guidance on hanging doors with even reveals, finishing MDF properly, respecting services, and deciding when building beats buying. Throughout, the guidance is aimed at real UK rooms where walls lean, floors slope and the alcove is never quite the size a single tape measure reading suggests, so every stage assumes you will need to scribe and adjust....

How Big Should My Wardrobe Be?

How Big Should My Wardrobe Be?

A wardrobe should be around 600mm deep, tall enough to use the room's height without touching the ceiling, and wide enough to give each adult 900mm to 1200mm of hanging rail. This guide explains why depth is the one fixed figure, set by the width of a coat hanger rather than the size of the room, and when a shallower front to back rail is a sensible compromise. We cover choosing a height that accounts for reach, the carcass diagonal and sloping ceilings, plus a ten minute method for working out the width you genuinely need from your existing clothes. There is guidance on the clearance a hinged door requires, the walkway a bedroom needs to stay comfortable, and specific advice for main bedrooms, box rooms, guest rooms and children's rooms. We close with a short checklist to run through before ordering....

How Do You Organise Your Wardrobe?

How Do You Organise Your Wardrobe?

A well organised wardrobe is less about storage products and more about sequence and restraint. This guide starts with emptying the unit completely and sorting into keep, repair, store and let go, then explains why grouping by category makes a wardrobe searchable and how the frequency rule decides what belongs at eye level. It covers the hang or fold decision by fibre and construction, why hangers matter more than they appear to, how to reclaim wasted vertical space below the rail and above it, and how seasonal rotation keeps a British wardrobe workable year round. It also covers the maintenance habits that keep a system going, and how to tell when the furniture itself is the limitation....

How Much Do Sliding Wardrobe Doors Cost?

How Much Do Sliding Wardrobe Doors Cost?

Sliding wardrobe doors cost noticeably more per panel than hinged doors, and the reason is straightforward: each panel is larger, and it depends on a track system that has to keep working smoothly for years. This guide sets out realistic UK figures for board, wood effect, mirrored and glass panels, explains what the track adds and why a soft close top hung system costs more than a basic bottom rolling one, and covers typical fitting charges. It also shows how to measure an opening properly, including the floor and ceiling checks that catch problems before panels are ordered, and looks at when replacing doors on an existing carcase stops making financial sense against a complete new wardrobe. We finish with the small maintenance habits that keep the doors gliding....

How Do You Build Your Own Wardrobe from Scratch?

How Do You Build Your Own Wardrobe from Scratch?

Building a wardrobe from scratch is within reach for anyone comfortable with a drill and a saw, provided the panels are cut accurately and the carcass is square before the back goes on. This guide takes the project in order: choosing between MDF, birch plywood and melamine faced chipboard, working out a cutting list that accounts for panel thickness, assembling the box flat on the floor, and checking the diagonals before fixing anything permanently. It also covers rail heights for single and double hanging, why drawers are the fiddliest element to build, fitting concealed cup hinges and adjusting the door gaps, sealing MDF edges before painting, and anchoring the finished unit safely. There is guidance on having sheet material cut to size rather than doing it by hand, the fixings that suit plasterboard and masonry walls, and an honest comparison of what a scratch build costs in time against a bought unit of the same size....

How Do You Assemble Wardrobe?

How Do You Assemble Wardrobe?

Assembling a wardrobe means laying the panels out flat, fitting dowels and cam bolts, joining the sides to the top and base, checking the carcass is square, fixing the back panel, then standing it up and adding shelves, rails and doors. The order matters more than anything: the back panel goes on while the box is still flat and adjustable, because that panel locks the wardrobe square permanently. This guide covers the preparation that saves the most time, how to identify mirrored side panels before joining anything, how to seat cam bolts and dowels correctly, and how to square a carcass using the diagonal measurement. It then works through levelling, fitting anti tip brackets, hanging rails and drawer runners, and adjusting hinged and sliding doors for even gaps, along with the mistakes that cause the most rework. A closing FAQ covers missing fittings, stripped cam locks, and whether a wardrobe can be dismantled and rebuilt later....

How Do You Measure up for Sliding Wardrobe Doors?

How Do You Measure up for Sliding Wardrobe Doors?

Measuring for sliding wardrobe doors is unforgiving work, because unlike hinged doors there is no hinge adjustment to hide an out of square opening. This guide sets out exactly what to record: three widths, three heights, both diagonals, and the front to back depth that most people forget, which is around 100mm for a two panel system. It explains why you always work to the smallest figure, how to allow for carpet and underlay before fitting, and how to check level, plumb and square with a long level rather than a short one. Panel counts by opening width, mirrored panel weight, and planning the interior layout before the doors go on are all covered, with UK homes and their uneven alcoves in mind....

How Do You Measure for Sliding Wardrobe Doors?

How Do You Measure for Sliding Wardrobe Doors?

Measure for sliding wardrobe doors by taking the width at three heights and the height at three positions across the width, then working to the smallest figure in each case. The smallest width is the one your doors must pass, and any surplus at wider points is closed with a scribed filler strip. Sliding doors are far less tolerant than hinged ones, because a panel has to run in a straight track for its whole travel. This guide covers measuring width, height and the often overlooked depth, checking the opening for square and the floor for level, allowing for the track deduction and for new flooring, and understanding why panel widths are calculated from the opening rather than divided by hand. We also look at how panel numbers affect access and how to check your delivery route. A final section covers measuring around obstacles such as skirting boards, coving and pipework....