Furniture in Fashion Blog
Furniture in Fashion Blog
Furniture in Fashion Blog
Yes, outdoor up and down lights are usually a good choice for a terrace, as long as the terrace sits against a solid vertical surface such as a house wall, a garden wall or a close boarded fence. They throw light both upwards and downwards in neat beams, which gives the wall texture and rhythm and leaves a soft spill on the paving. Glare is low because the light source is hidden. Where they fall short is as the only light for dining, and on terraces with no wall to wash.
So the real question is not whether up and down lights work, but whether they suit your particular terrace. Our range of modern outdoor lighting UK includes many up and down designs, and the considerations below should help you decide.
What up and down lights actually do
An up and down light is a wall mounted fitting, usually a cylinder or a square box, with an opening at the top and bottom. Light leaves through both, creating two beams that fan out across the wall. The effect is architectural: a row of fittings creates a repeating pattern that reads well from a distance and through glazing.
The light they produce is indirect. Most of it lands on the wall and is reflected back, rather than shining straight at you. That is why they feel comfortable to sit near. It is also why their usefulness depends so much on the surface behind them.
If you are planning lighting across the whole house at the same time, our wider lighting UK sale collection lets you coordinate finishes between indoor and outdoor fittings.
Consider the wall first
The wall is part of the lighting. Different surfaces respond in different ways.
- Pale render: reflects light well and shows crisp beam shapes. A good match for up and down fittings.
- Brick: warmer and darker, so more light is absorbed. The beams will show the texture of the mortar joints, which many people like.
- Natural stone: uneven surfaces look striking when grazed from close range, though beam edges will be softer.
- Timber cladding: vertical boards suit up and down light particularly well, as the beams follow the grain.
- Dark painted walls: absorb a lot of light. You may need brighter fittings or closer spacing to see an effect.
If your terrace is open on all sides, with no wall nearby, up and down lights have little to work with. In that situation, low bollards, post lights or table lamps make more sense.
Height and spacing
Mounting height affects how the beams look. On a typical single storey wall, many people fit up and down lights at around head height or slightly above, so the upper beam reaches the eaves and the lower beam falls on the paving. On a taller wall, mounting a little higher keeps the proportions balanced.
Spacing creates the rhythm. Fittings placed too close together produce overlapping beams that blur into a general wash. Placed too far apart, they look sparse. A useful starting point is to space them so the beams meet or nearly meet at the top and bottom, then adjust once you see them in place. Many fittings can be tested on temporary fixings before the final installation.
Symmetry helps. Centre fittings on windows, doors or the midpoint between them so the pattern relates to the architecture rather than fighting it.
Corners need particular thought. A fitting placed right at the end of a wall can look as though it has run out of space, while one set slightly in from the corner frames the terrace more comfortably. If the terrace wraps around two sides of the house, treat each wall as its own composition and let the spacing differ if the windows and doors require it. Consistent height across both walls will hold the scheme together even when the gaps between fittings vary.
Beam angle and output
Up and down lights come with different beam angles. Narrow beams create tight, dramatic columns of light that emphasise height. Wider beams give a softer wash and more general illumination on the terrace floor. Some fittings let you adjust the beam or choose different angles for top and bottom.
For a terrace where you sit and eat, a slightly wider lower beam is helpful, because it puts more light on the ground where you walk. For a narrow side terrace or a feature wall, narrow beams can be more striking.
As for brightness, more is rarely better. The beams should be visible and the paving should be safe to walk on, but the terrace should not feel floodlit.
Colour temperature and finish
Warm white light around 2700K to 3000K suits most terraces and flatters stone, brick and planting. Cooler tones can make a terrace feel more like a commercial building. Keep the colour temperature consistent with any other outdoor lights you can see from the same spot.
Finish affects how the fitting looks in daylight, when it is not lit. Black and anthracite disappear against most walls. White suits pale render. Brushed stainless steel and copper become more of a feature in their own right. Choose a finish that matches window frames, door furniture or railings.
Weather and installation
Terraces are exposed, and up and down lights have an opening at the top that faces the sky. Look for a suitable IP rating, with IP54 or IP65 being common choices for exposed walls, and check that the upper aperture is protected by a glass lens. A good fitting will also manage condensation so moisture does not collect inside.
Mains wired wall lights should be installed by a qualified electrician. If you are building a new terrace, it is worth running cables before paving and render are finished, as it is much easier than chasing walls later. Separate switching for terrace lights, or a dimmer, gives you more control over mood.
How they work with seating and dining
Up and down lights create an attractive backdrop, but on their own they do not light a table well. The upper beam goes to the eaves and the lower beam lands on the ground near the wall. If your dining set sits away from the wall, people will be eating in relative shade.
The answer is layering. Use up and down lights for the architecture, then add softer light where people gather. A pair of modern wall lights UK with a more diffuse glow beside a door can help, as can a cordless lantern or lamp on the table. If you are refreshing the furniture at the same time, our garden dining sets UK sale range includes pieces sized for terraces of different depths.
This layered approach also gives you options. On a quiet evening you may only want the wall lights. With guests, you might add table light for conversation and dining.
Thinking about neighbours and the night sky
Because up and down lights send light upwards, it is worth thinking about where it goes. On a wall with eaves or a soffit above, the upper beam stops there and creates a neat finish. On a free standing garden wall with nothing above it, the upper beam will continue into the sky. In that case, choose a fitting with a narrow upper beam, a lower output, or one where the top can be closed off.
Switching lights off at a sensible time also helps. Our guide to garden lighting and light pollution in the UK explains simple ways to keep light where you need it.
When another fitting is the better choice
Up and down lights are not always the answer. Consider alternatives if:
- Your terrace has no wall or fence alongside it.
- The wall is very low, such as a short retaining wall, where the beams would have no room to develop.
- You need focused light for steps, where recessed step lights are safer.
- The terrace overlooks neighbours closely and upward light would spill into their windows.
- You want a softer, more decorative feel, where festoon or string lights may suit better.
A quick decision guide
Up and down lights are a strong choice if your terrace has a solid wall you like the look of, you want an architectural effect visible from inside the house, and you are happy to add softer light near seating. They are less suitable for open terraces, very low walls and sites where upward light would bother neighbours.
At Furniture in Fashion we bring outdoor lighting and garden furniture together so you can plan the whole terrace in one place, with free delivery to most UK mainland postcodes.
Frequently asked questions
How high should up and down lights be on a terrace wall?
Many people fit them at around head height or a little above on a single storey wall. The aim is to let both beams develop fully, so adjust for taller or shorter walls and test positions before fixing.
How far apart should up and down lights be?
Space them so the beams meet or almost meet at the top and bottom. Centring them on windows and doors gives a more balanced result than measuring equal gaps along the wall.
Are up and down lights bright enough to eat by?
Not usually on their own, especially if the table is away from the wall. Add a table lantern or a softer wall light near the seating area.
Do up and down lights cause light pollution?
They can if the upper beam has nothing to stop it. On walls with eaves above, the effect is contained. On free standing walls, choose narrower or lower output beams and switch off later in the evening.

No Comments
Sorry, the comment form is closed at this time.