For an outdoor dining area, garden wall lights generally work well at a modest output of a few hundred lumens per fitting, in a warm white of around 2700K to 3000K. That is enough to see food, faces and the edges of the table without glare. A small terrace might need only one or two fittings, while a larger dining space can use three or four lower output lights spread along the wall rather than one bright one.
Lumens tell you how much visible light a bulb or LED produces. Outdoors, where there are fewer reflective surfaces than indoors and the surrounding darkness is complete, it can be tempting to aim high. In practice, a dining area usually feels better with less light than you might expect, layered from more than one source. Our range of modern outdoor lighting UK sale lists output for each fitting, which makes comparison easier, and our wider modern lighting UK collection covers the indoor side of the scheme.
Older bulbs were described by their wattage, which measured energy use rather than light. With LEDs, a fitting can produce a lot of light from very few watts, so wattage no longer gives a reliable picture of brightness. Lumens do.
When choosing garden wall lights, look for the lumen figure on the product details. If a fitting uses replaceable bulbs, check the lumen output of the bulb you plan to use, as the fitting itself may accept a range.
Rather than chasing a single number, it helps to think in terms of the job each light is doing.
A light on the house wall or garden wall that gives a general glow to the area. A lower output works here, as its job is to stop the space feeling dark rather than to illuminate the table directly.
A fitting close to the table, perhaps on a wall the table sits against, that helps you see what you are eating and serving. A moderate output of a few hundred lumens is usually comfortable at this distance.
A low output fitting picking out a plant, a textured wall or a water feature. This adds depth to the scene and reduces the need for brighter general light.
Combining these layers means no single fitting has to be very bright, which reduces glare and keeps the atmosphere relaxed.
Light falls away quickly as it travels. A wall light directly beside the table will feel much brighter at the table than the same fitting mounted on a wall a few metres away. Before deciding on output, measure the distance between the proposed light position and the centre of the table.
Two lights with the same lumen figure can feel very different. A warm white, around 2700K, feels softer and more flattering to skin tones and food. A cooler white of 4000K or above can make the same output feel harsher and brighter, which suits a utility area but rarely a dining terrace.
Keep the colour temperature consistent across all the wall lights around a dining area. Mixing temperatures makes some parts of the space look yellow and others look grey.
Glare is the main reason outdoor dining lighting feels uncomfortable. It happens when a bright light source sits in your field of view. Garden wall lights that shine downwards, or up and down, put light onto surfaces rather than into people’s eyes. Fittings with a diffused or frosted cover spread light more gently than a bare LED.
Mounting height plays a part too. A fitting mounted just above head height tends to cast light down onto the table area, while one mounted at seated eye level may shine straight into a diner’s face.
A dining area is used in different ways through the evening: bright enough to lay the table and serve, softer once everyone is sitting down, and lower still as the evening winds down. A dimmable wall light, or a fitting with smart control, lets you change the level without changing the fittings.
If you are unsure which output to choose, a slightly brighter dimmable fitting gives you room to adjust. A light that is too dim and cannot be turned up is harder to fix.
The answer depends on the size and shape of the dining area and what else is lighting it.
Several lower output lights almost always look better than one high output light. They spread the glow evenly and avoid deep shadows on one side of the table. If you are choosing a new table and chairs at the same time, our modern garden dining sets UK sale range will help you plan the layout and the lighting together.
Many outdoor dining areas include a parasol, canopy or pergola. These change how light behaves. A parasol can block light from a wall fitting above, leaving the table in shade. In that case, lights mounted lower on the wall, or a lamp beneath the canopy, may work better.
When planning a covered dining area, it helps to place the structure first and then decide where the lights will reach. Our garden parasols UK range includes cantilever designs that leave the wall clear for lighting.
Outdoor dining often happens in the evening, when neighbours may be relaxing in their own gardens. Very bright wall lights can spill over fences and reduce the sense of privacy for everyone. Choosing lower outputs, directing light downwards and switching lights off when the meal is over are simple courtesies.
Moderate light levels are also kinder to garden wildlife such as bats and moths. There is helpful background in our post on UK guidance on garden lighting and light pollution. If your garden is on the smaller side, our look at furniture fit in compact UK new build gardens may help you plan where the dining area and lights should go.
Lumen figures are helpful for comparison, but nothing replaces seeing the light in your own garden. Walls differ in colour and texture, tables differ in size and finish, and every garden has its own level of background light from streetlamps, windows and neighbouring homes.
A simple test can save you from fitting lights that turn out too bright or too dim:
Pay attention to the wall finish. A pale render or light stone reflects a large amount of light back towards the table, so a lower output fitting may be enough. Dark brick, painted fences and planting absorb more, so you may need a little more output or an additional fitting to achieve the same effect.
Some dining areas simply sit too far from any wall for wall lights to do the main work. In these cases, treat the wall lights as background and bring task light closer to the table. A cordless table lamp, a lantern in the centre of the table or festoon lighting strung above the dining area will put light where it is needed without forcing the wall lights to be harsh. This layered approach also gives you more control over the mood as the evening goes on.
Lumens are a useful measure, but the aim is a dining area where people want to stay a little longer. Modest output, warm colour and well placed fittings achieve that more reliably than a high number on a box. You can explore outdoor lighting and garden dining furniture at Furniture in Fashion, with free delivery to most UK mainland postcodes.
For most dining areas, a fitting of that output would feel bright, particularly close to the table. A lower output, or a dimmable fitting, usually creates a more comfortable atmosphere.
Not necessarily. Outdoors there are fewer surfaces to reflect light, but the eye also adapts to darkness. Modest, well directed light often feels sufficient.
Warm white, around 2700K to 3000K, is flattering to food and faces and helps the space feel relaxed.
Not always. Lights near the table might be a little brighter than background or accent lights. Keep the colour temperature the same across all of them for a consistent look.
Finish is one of the first things people notice about exterior lighting, yet it is…
Coach lights suit a Victorian terrace because they belong to the same era of design.…
The best opal glass bathroom lights for a minimalist look are simple flush ceiling fittings,…
The bulb shape that looks best in a PIR sensor light depends on the fitting…
Dusk to dawn lights switch themselves on as daylight fades and off again when morning…
A pendant light is one of the most effective ways to give a master en…
This website uses cookies.