The bulb shapes that look best in PIR sensor lights depend on the fitting. In open lanterns with clear glass, globe and candle shaped LED filament bulbs give the most attractive result, because the bulb becomes part of the design. In frosted or opal fittings, a standard GLS shape spreads light evenly without hot spots. In floodlights and directional fittings, a reflector or integrated LED panel works better than any decorative shape. Whatever shape you choose, it must be an LED bulb that is compatible with motion sensor switching, or the light may flicker, glow faintly or fail to trigger properly.
A PIR sensor light is switched on and off far more often than an ordinary lantern, so the bulb inside it has to cope with frequent cycling as well as looking good. Below we look at each common shape, where it works best and the practical points that keep a sensor light reliable. If you are choosing new fittings at the same time, our modern outdoor lighting UK sale range and wider modern lighting UK collection include lanterns with both visible and concealed bulbs.
PIR stands for passive infrared. The sensor detects changes in heat across its field of view, which is why it responds to people, animals and cars rather than to shadows. When it detects movement after dark, it switches the light on for a set period, then switches it off again.
This matters for bulb choice in two ways. First, the light switches many times a night, so the bulb should handle frequent on and off cycles without its lifespan suffering. Second, a bulb that gives off a lot of heat close to the sensor can, in some fittings, interfere with detection. LED bulbs run far cooler than old incandescent or halogen bulbs, which is one of several reasons they are the sensible choice.
Before thinking about appearance, check which cap your fitting takes. Most outdoor lanterns in the UK use one of four:
Also check the maximum size of bulb the fitting can accommodate. A large globe that looks wonderful on the shelf may simply not fit inside a slim lantern.
Globe bulbs, usually labelled G95 or G125 depending on diameter, have a round shape that looks balanced inside open lanterns and cage style fittings. With a clear glass and visible LED filaments, they create a warm, decorative glow that suits both contemporary and traditional exteriors.
Globes work particularly well in fittings where the bulb sits centrally and can be seen from several sides. Choose a warm white colour temperature of around 2200K to 2700K for a soft, inviting look. Very large globes can produce noticeable glare in a sensor light that suddenly switches on, so a medium size is often more comfortable at a front door.
Candle bulbs, often labelled C35, have a slim, tapered shape that echoes a flame. They are the natural choice for coach lanterns, heritage wall lights and period style porch fittings. A filament candle bulb gives a gentle sparkle through clear or bevelled glass panels.
Because candle bulbs are small, their light output is usually modest. That suits a lantern beside a front door, where the aim is to welcome visitors rather than flood the area. If you need more brightness, look for a candle bulb with a higher lumen rating rather than switching to a larger shape that may look out of proportion.
Pear shaped bulbs, sometimes labelled ST64, have the elongated silhouette of early electric lamps. They suit industrial style wall lights, open cage fittings and lanterns with a vintage character. With a visible filament and a slight amber tint, they add warmth and texture to brick and timber exteriors.
These bulbs are often quite tall, so check the height of the fitting. They can also look busy in a sensor light that is visible from the street, so use them where the light is a deliberate design feature rather than a purely functional one.
The familiar GLS shape, often labelled A60, is the everyday household bulb. It is rarely the most attractive shape on display, but it comes into its own inside frosted, opal or ribbed glass. Its broad shape distributes light evenly across the shade, avoiding the bright spot you can get with a narrower bulb.
A frosted GLS LED bulb inside a ribbed glass wall light gives a soft, even glow that hides the bulb completely. This is often the most practical combination for a PIR fitting that needs to look neat and give reliable light.
Tubular bulbs are long and narrow. They suit modern cylindrical wall lights and slim glass tubes, where a globe or GLS shape would not fit. Clear tubular filament bulbs create an elegant vertical line of light, which looks particularly good when two fittings flank a door.
For security floodlights and directional fittings, decorative bulb shapes are not the right tool. Reflector bulbs, including GU10 spotlights, concentrate light in one direction and are designed for task lighting. Many modern floodlights and sensor lights now use integrated LED modules with no replaceable bulb at all. These are efficient and reliable, though the whole fitting will eventually need replacing rather than just the bulb. Our modern wall lights UK sale range includes options with both replaceable bulbs and integrated LEDs, so you can choose the approach that suits each position.
The most common problem with PIR lights is not appearance but performance. Some sensors were designed for older, higher wattage bulbs. When fitted with a low wattage LED, they may not work correctly. Typical symptoms include:
These issues usually arise because the sensor needs a minimum load to operate properly. Solutions include choosing a sensor fitting designed for LED bulbs, selecting bulbs specifically described as suitable for sensor or timer use, or consulting a qualified electrician about the sensor itself. Avoid older compact fluorescent bulbs, which take time to reach full brightness and are poorly suited to frequent switching.
Shape affects appearance, but colour temperature affects mood. For decorative sensor lanterns, warm white of 2200K to 2700K suits most homes. For floodlights over driveways and side passages, a neutral white of around 3000K to 4000K gives clearer visibility without feeling harsh.
Brightness should match the job. A candle bulb of 250 to 400 lumens is usually enough for a lantern beside a front door. A globe or GLS bulb of 400 to 800 lumens suits a back door or porch. Floodlights covering larger areas will need more. Our article on outdoor lighting and security for UK homeowners considers how sensor lights fit into a wider approach to home safety.
At Furniture in Fashion, we offer free delivery to most UK mainland postcodes, and Returns are available up to 30 days, so you can check that a new fitting suits both your wall and your chosen bulb.
Not always. Some sensors need a minimum load and may cause flickering or ghosting with very low wattage LEDs. Look for bulbs and fittings described as sensor compatible.
Standard GLS and larger globe bulbs generally offer higher lumen options than candle or tubular shapes, though output depends on the individual bulb.
This is usually caused by a small current passing through the sensor to a low wattage LED. A sensor designed for LED loads or a different bulb usually solves it.
Yes, as long as the fitting itself is suitably weatherproof. LED filament bulbs give a decorative look while running cool and efficiently.
Finish is one of the first things people notice about exterior lighting, yet it is…
Coach lights suit a Victorian terrace because they belong to the same era of design.…
The best opal glass bathroom lights for a minimalist look are simple flush ceiling fittings,…
Dusk to dawn lights switch themselves on as daylight fades and off again when morning…
A pendant light is one of the most effective ways to give a master en…
Outdoor lights complement garden furniture best when the two share something: a finish, a material,…
This website uses cookies.