Furniture in Fashion Blog
Furniture in Fashion Blog
Furniture in Fashion Blog
The most effective way to cut the running cost of globe bathroom wall lights is to fit LED bulbs, choose them by lumens rather than watts, and only light what you need, when you need it. Put the wall lights on their own switch or dimmer, position them where they do the most useful work, keep the glass clean, and consider a sensor or timer if lights are often left on. These changes reduce energy use without making the bathroom feel dim.
Globe wall lights are a popular choice for British bathrooms because they spread soft, even light and suit both modern and traditional rooms. A little planning means they can be as efficient as they are attractive. You can explore the shapes and finishes available in our globe wall lights UK range, alongside the wider modern lighting UK sale collection.
Why Globes Behave Differently From Other Wall Lights
A globe shade surrounds the bulb completely, so light leaves in every direction. Some of it reaches your face at the mirror, some lights the wall behind and some travels up and down. This all round glow is what makes globes so flattering, but it also means a portion of the light is not directed where you most need it.
The glass itself matters too. Opal glass diffuses light beautifully but absorbs some of it. Frosted glass sits somewhere in between. Clear glass lets the most light through but shows the bulb, which can cause glare.
Understanding this helps you choose the right bulb and placement. You do not need a more powerful bulb to make up for the shade. You need the right bulb in the right place.
Switch to LED Bulbs
If your globe wall lights still use halogen or older incandescent bulbs, replacing them with LEDs is the single biggest saving you can make. LEDs use a fraction of the energy for the same light output, last considerably longer and produce very little heat. That last point matters in a bathroom, where a hot halogen bulb inside a sealed globe can make the glass and fitting uncomfortably warm.
Globe wall lights commonly take one of a few bulb types:
- G9 capsule: small two pin bulbs used in compact fittings.
- E14 small screw: often found in smaller globes and traditional fittings.
- E27 standard screw: used in larger globes.
- Integrated LED: the light source is built into the fitting and is not replaceable in the usual way.
Check the fitting’s specification for the bulb type and the maximum wattage. LED replacements are widely available for all of the common caps.
Choose Bulbs by Lumens, Not Watts
Watts measure energy use, not brightness. With LEDs, a low wattage bulb can produce plenty of light, so the number to look at is lumens, which measures light output.
For a pair of wall lights either side of a bathroom mirror, a moderate lumen output in each globe is usually enough when combined with a ceiling light. If the globes are your only light at the basin, you may want a little more. Start with modest bulbs and increase only if the room feels too dim. It is easy to swap a bulb, and far easier than living with lights that are brighter than they need to be.
Also look at the energy label on the packaging. It shows the efficiency rating and the energy use over a set period, which makes comparing bulbs much more straightforward.
Match Colour Temperature to the Glass
Warm white bulbs around 2700K to 3000K suit most opal and frosted globes, giving a soft, inviting glow. Cooler bulbs at 4000K can look slightly blue through opal glass and are better kept for rooms where precise grooming light matters most.
Getting the colour right is part of efficiency. When light feels comfortable, people are less inclined to switch on every fitting in the room to compensate for a harsh or gloomy atmosphere.
Give Wall Lights Their Own Switch
In many UK bathrooms, every light is controlled by a single pull cord or switch. That means turning on the ceiling light, wall lights and sometimes a mirror light all at once, even for a quick visit.
Separating the circuits lets you choose. Wall lights alone are often enough for evening use, while the ceiling light can be saved for cleaning or full daytime routines. An electrician can usually add a second pull cord or a dual switch outside the room.
Use a Dimmer
Dimming a light reduces the energy it uses as well as its brightness. A dimmer on the wall lights gives you bright light for shaving or makeup and a lower setting for a bath or a late night visit.
The bulbs must be marked as dimmable, and the dimmer must be suitable for LED loads. Mismatched combinations can cause flicker or a buzzing sound. If you are buying new fittings, check the specification for dimming compatibility before you buy.
Sensors and Timers for Busy Households
In family homes, bathroom lights are often left on after someone leaves the room. A presence sensor that turns the lights off after a short period without movement can help. Some sensors also detect daylight, so they will not switch on during a bright morning when the window provides enough light.
Sensors work best when they control the ceiling light and the globes are left on a manual switch for evening use. That way, you keep control of the softer mood lighting while the main light looks after itself.
Place Globes Where They Work Hardest
Placement has a direct effect on how much light you need. Globes positioned either side of the mirror at roughly face height light your face evenly from both sides. That arrangement means you need less total brightness than a single light above the mirror, which casts shadows downwards and often prompts people to add more light to compensate.
When choosing a mirror to sit between a pair of globes, consider one with a slim frame in the same finish as the lights. Our bathroom mirrors UK sale selection includes simple framed and frameless designs that leave room for wall lights either side, and the bathroom lighting UK range focuses on fittings designed for damp rooms.
It helps to work out the mirror height first, then set the wall lights around it. Our guide to UK bathroom mirror height standards explains how basin height and eye level relate, which in turn shows where your globes should sit.
Let the Room Help You
Pale wall colours and light tiles reflect more light than dark finishes, which means each globe goes further. Gloss and satin finishes reflect more than matt. A large mirror reflects light back into the room.
That does not mean every bathroom should be white. Deep colours can look wonderful with globe lights. It simply means a darker room may need a little more light, so the other savings described here become even more valuable.
Making the most of daylight helps too. Keep windows clear where privacy allows, use frosted film rather than heavy blinds and avoid blocking light with tall cabinets placed beside the window.
Keep the Glass Clean
In a bathroom, steam and airborne particles leave a film on glass over time. Hard water marks and dust can noticeably reduce how much light passes through a globe. Cleaning the shades every few weeks keeps them bright, which may mean you can use a lower lumen bulb.
Always switch off the light and let the bulb cool before cleaning. Remove the globe if the design allows, wash it in warm soapy water, rinse and dry thoroughly before refitting. Wipe metal parts with a soft cloth to avoid scratching the finish.
A Note on Smart Bulbs
Smart bulbs offer scheduling, dimming and colour control from a phone, which can help you use light more carefully. Bear in mind that they draw a small amount of standby power when switched off at the app rather than at the wall. In a bathroom where lights are used for short periods, conventional LED bulbs with a good dimmer are often just as effective.
Smart bulbs must also suit the fitting. Some are larger than standard bulbs and may not fit inside a compact globe.
Safety Comes First
Any wall light in a bathroom needs an IP rating appropriate for its position. IP44 is the usual minimum near a basin. Lights closer to a bath or shower need a higher rating. Changing a bulb is a simple job, but installing or moving fittings should always be done by a qualified electrician.
Check the rating on every fitting before you buy, rather than assuming a bathroom style light is suitable for any position. You can see the full selection of lighting, along with mirrors and bathroom furniture, at Furniture in Fashion.
Frequently Asked Questions
Can I put LED bulbs in my existing globe bathroom wall lights?
In most cases, yes. Check the bulb cap type and maximum wattage on the fitting, then choose an LED with the same cap. Make sure the LED is small enough to fit inside the globe.
How bright should bathroom wall light bulbs be?
It depends on the room, the glass and whether there is also a ceiling light. Start with a moderate lumen output and increase only if needed. Lights either side of the mirror usually need less brightness than a single overhead fitting.
Do dimmers save energy with LED bulbs?
Yes. Dimming an LED reduces the power it draws. Use dimmable bulbs and a dimmer designed for LED loads to avoid flicker.
Are integrated LED globe lights more efficient than bulb fittings?
Both can be efficient. Integrated LEDs are often well designed for their shade, while replaceable bulbs let you change brightness and colour later. Choose based on flexibility and the specification.

No Comments
Sorry, the comment form is closed at this time.