Furniture in Fashion Blog
Furniture in Fashion Blog
Furniture in Fashion Blog
In a contemporary wet room, bathroom vanity lights should provide clear, shadow free light at the face while coping with constant moisture and spray. Designers typically use slim vertical wall lights either side of the mirror or an illuminated mirror with side lighting, mounted at face height and rated at least IP44, or higher if the vanity sits close to the open shower area. Keep the fittings linear and minimal to suit the clean architecture of a wet room, and set the light to around 3000K with high colour rendering.
A wet room removes the barrier between shower and room, which changes how every fitting must perform. Our range of wet room bathroom lighting UK homes can explore includes sealed wall lights and illuminated mirror options suited to these open layouts.
How wet rooms change the lighting brief
In a standard bathroom, the shower is enclosed and water rarely travels far. In a wet room, the entire floor is designed to get wet, and spray can reach surprisingly far from the shower head, particularly with rainfall heads or body jets. This affects which zones the vanity area falls into and which IP ratings are needed.
A glass screen helps contain water, but it does not change the fundamental point: everything in the room should be selected with moisture in mind. A qualified electrician should confirm the zones and ratings for your specific layout.
The designer approach to vanity lighting
Interior designers tend to approach vanity lighting with three priorities: light quality at the face, visual calm and long term durability. In a wet room, the third becomes as important as the first two.
Light quality
The most flattering vanity light comes from the sides, at face height. This is why designers favour pairs of vertical wall lights or mirrors with light along both edges. Overhead light alone creates shadows under the eyes and chin, which is particularly noticeable in rooms with polished surfaces that reflect harsh contrasts.
Visual calm
Wet rooms are usually minimal: microcement, large format tiles or stone with few joints, frameless glass and wall hung fittings. Vanity lights should reflect that simplicity. Linear profiles, slim cylinders and frameless illuminated mirrors suit the architecture. Ornate fittings tend to look out of place.
Durability
Moisture is constant in a wet room. Fittings should be well sealed, with finishes that resist water marks. Brushed metals, matt black and satin finishes tend to hide spotting better than polished surfaces.
Choosing between wall lights and illuminated mirrors
Both options work well in a wet room. The right choice depends on wall space, budget for electrical work and personal preference.
Vertical wall lights
A pair of slim vertical wall lights either side of the mirror gives designers the most control. You can choose the mirror and lights separately, adjust spacing and update one without replacing the other. They also add a sculptural element to the vanity wall.
Our broader contemporary lighting UK sale collection includes linear wall fittings that suit wet room interiors.
Illuminated mirrors
Illuminated mirrors integrate light and glass in a single unit, which keeps the wall extremely clean. Many include demisting pads, which are particularly useful in a wet room where steam is constant. Look for models with light along both sides or around the full perimeter rather than only along the top edge.
Linear light bars
A long horizontal light bar above the mirror is a popular contemporary look. On its own, it can cast some shadow, so designers often combine it with a backlit mirror or soft side lighting to fill in the face.
Whichever option you choose, size it to the vanity beneath. Lights and mirror should sit within the width of the unit, or align precisely with its edges. If you are choosing the vanity at the same time, our range of modern bathroom vanities UK includes wall hung units in widths that make this alignment straightforward.
Mounting height and spacing
For side mounted lights, the centre of the fitting should sit at roughly eye level, often around 1600mm to 1700mm from the finished floor. The gap between the lights depends on the mirror width, but most designers keep them a short distance from the mirror edge so the composition feels intentional.
If you are fitting a horizontal light bar, mount it just above the mirror and choose one that projects light forward rather than straight down. Mirror placement drives every other measurement, so our guide on UK bathroom mirror height standards is a helpful starting point.
Colour temperature and colour rendering
Wet rooms often use cool toned materials such as grey microcement, concrete effect tiles or pale stone. Light that is too cool can make these surfaces feel stark. A colour temperature around 3000K warms the space while keeping task light crisp. For rooms with warmer materials such as timber or terracotta, 2700K can work well.
Colour rendering is crucial at a vanity. Lamps with a CRI of 90 or above show skin tones more accurately, which matters for makeup, shaving and skincare. Our article on mirror light quality and makeup in UK bathrooms explores why light quality at the mirror makes such a difference.
Pairing vanity lights with the vanity itself
In a wet room, a wall hung vanity is almost always the right choice. It keeps the floor clear for drainage and cleaning and reinforces the open, floating feel of the room. Consider these pairings:
- A concrete or stone effect vanity suits matt black or brushed nickel lights.
- A timber vanity, such as oak or walnut, suits brushed brass or bronze.
- A white gloss vanity works with chrome or matt white fittings for a very clean look.
Whatever the material, keep the vanity depth modest. A slimmer unit leaves more open floor, which suits the airy character of a wet room and gives wall lights a cleaner line to frame.
Adding depth with ambient light
Vanity lights handle task lighting, but a wet room also benefits from softer ambient light. A low output LED strip beneath a floating vanity, rated for the location, creates a floating effect and provides gentle light for night time use. A recessed niche light in the shower area adds depth without glare. Ceiling downlights should be sealed and spaced to wash the walls evenly.
Designers often put each of these layers on a separate switch or circuit so the room can shift from bright morning use to a softer evening mood.
Lighting a wet room in a compact UK home
Many wet rooms in UK homes are created from small bathrooms or box rooms, where the open layout is chosen precisely because it makes a tight space feel larger. In these rooms the vanity is rarely far from the shower, so the distinction between zones becomes very fine. Designers working in compact wet rooms often specify IP65 fittings across the whole vanity wall, which removes the worry about spray and keeps every fitting consistent in appearance.
Space for wall lights can also be limited. Where there is not enough wall either side of the mirror, a slim illuminated mirror is often the neatest answer. Alternatively, a single vertical light on one side of a narrow mirror, paired with a soft downlight directly in front of the basin, can work well in a cloakroom sized wet room.
Pale, matt surfaces help small wet rooms feel brighter. Light coloured microcement or large format tiles with minimal grout lines reflect light evenly without creating glare. A darker floor can ground the room, but keep the walls around the vanity light so that faces remain well lit at the mirror.
Practical points for wet room installation
- Plan all lighting at the same time as waterproofing and tanking. Cable routes and back boxes must be in place before membranes and tiles go on.
- Use switches outside the room or pull cords, as required for bathrooms.
- Choose fittings with replaceable lamps or long rated LED modules, as access can be difficult once tiling is complete.
- Ventilation is essential. A strong extractor fan protects fittings and finishes from condensation.
Bringing it together
The most successful wet room vanities share a common thread: a simple composition, light from both sides at face height and fittings that look as clean after five years as they did on day one. Choose quality over quantity, and let the architecture of the room lead.
When you are ready to choose your vanity, mirror and lighting, you can explore our collections at Furniture in Fashion.
Frequently asked questions
What IP rating do vanity lights need in a wet room?
IP44 is a sensible minimum near a basin, but in a wet room the vanity may fall within a higher risk zone depending on the shower position. An electrician should confirm whether IP65 or higher is needed.
Are illuminated mirrors suitable for wet rooms?
Yes, as long as they are rated for the location. Many include demisting pads, which are helpful in a wet room. Choose models with side or perimeter lighting for even light at the face.
Where should vanity lights be positioned?
Either side of the mirror at roughly eye level gives the most even light. If you use a single light above the mirror, combine it with a backlit mirror or other soft sources to reduce shadows.
Which finishes hold up best in a wet room?
Brushed and matt finishes, such as brushed nickel, matt black and brushed brass, tend to hide water marks better than polished finishes and suit the minimal style of most wet rooms.

No Comments
Sorry, the comment form is closed at this time.