A good outdoor lantern is one that suits its position, survives the British weather and gives the kind of light you actually want. Before buying, decide where it will go, how it will be powered, and whether it is there to be looked at or to light a task. Then check the weather rating, the material and the size against that position. Those few decisions narrow the choice quickly and prevent most of the disappointments people have with outdoor lanterns.
This guide walks through each of those points in turn. If you would like to browse while you read, our modern outdoor lighting UK range brings together wall lanterns, hanging lanterns and portable designs in one place, and our full lighting UK sale collection lets you compare them with indoor fittings in matching finishes.
Lanterns tend to fall into two broad roles. Some are working lights: a lantern beside the front door, at the top of steps or along a side path, where the aim is to see clearly and safely. Others are mood pieces: lanterns grouped on a terrace, set on a table or hung from a pergola, where the glow matters more than the brightness.
Working lanterns need dependable power and enough output to light a doorway or path. Decorative lanterns can be dimmer, portable and more playful in form. Knowing which role you are buying for prevents the common mistake of choosing a pretty candle lantern for a dark side return that really needs a fixed light.
Fixed to the house, a garage or a garden wall, these are the classic choice for entrances. They are usually mains powered and installed by an electrician, though solar and battery versions exist for walls without wiring.
Suspended from a porch ceiling, a bracket, a pergola beam or a tree branch, hanging lanterns bring light to head height and draw the eye upward. They suit covered porches and garden structures.
Mounted on a post, a gatepost or a pillar, these mark the edge of a driveway or the entrance to a front garden. They are typically mains powered and need a secure foundation and cable route.
Freestanding lanterns that sit on the ground, steps or tables. They can hold candles, battery LEDs or rechargeable units, and they are the easiest way to add a lantern without any installation.
Each option involves a trade off between convenience and reliability:
Many households combine them: a mains lantern by the door for everyday use, and a few rechargeable or candle lanterns brought out for evenings on the terrace.
The material decides both the look and the upkeep. Black powder coated steel and aluminium are the most common, offering a clean, classic finish that suits almost any house. Aluminium is lightweight and does not rust, which makes it a practical all round choice.
Stainless steel stays crisp and modern with light cleaning. Copper and brass warm up and darken over time, developing a patina that many people love on traditional homes. Galvanised metal has a utilitarian character that suits barns, cottages and industrial schemes. For portable lanterns, rattan, wood and woven synthetic fibres add texture, though natural materials need shelter or bringing inside in wet weather.
Glass matters too. Clear glass shows off a filament bulb or candle and gives the brightest light. Seeded or textured glass adds sparkle and hides the bulb a little. Frosted or opal glass softens the light and reduces glare, which is useful by a front door where people look straight at the fitting.
Outdoor lanterns are seen from a distance and against the scale of a whole house, so they often look smaller once installed than they did in the box. A lantern that seems large on the kitchen table can look modest beside a front door.
As a general guide, a wall lantern beside a door usually looks balanced at around a quarter to a third of the door’s height. A pair either side of a wide door can be slightly smaller than a single lantern. Holding a cardboard template of the right size against the wall is a simple way to judge proportion before you buy.
Every outdoor fitting should carry an IP rating, which describes its protection against solids and water. The first number covers dust and objects; the second covers water. For outdoor lanterns, the second number is the one to watch.
Think about the direction of the prevailing wind and whether the wall catches driving rain. A position that seems sheltered on a calm day may take a soaking in a winter storm.
Lanterns look their best with warm white light, typically around 2700K, which flatters brick, stone and planting. Filament style LED bulbs give a vintage effect in clear glass lanterns while using far less energy than traditional bulbs.
Consider glare. A bright bare bulb at eye level by the front door can dazzle visitors and make it harder to see the step. A frosted panel, a lower wattage bulb or a downward facing design often gives more useful light with less discomfort. Sensors and timers can also help by switching lanterns on only when needed.
Lanterns work best as part of a wider scheme rather than as isolated points. By the front door, mount wall lanterns slightly above eye level so the light falls on faces and the lock. On steps, place portable lanterns to one side of each landing so they mark the edges without becoming trip hazards. On a terrace, group lanterns of different heights near the seating to create a focal point.
Garden furniture gives lanterns somewhere to live. A lantern placed beside a bench or on the corner of a seating set immediately makes that spot feel like a destination. Our garden seating sets UK and modern garden benches UK ranges include designs that pair naturally with both contemporary and traditional lanterns.
Lighting at the front of the house also has a practical side. A well lit entrance helps visitors and makes it easier to see who is at the door. Our article on outdoor lighting and security for UK homeowners looks at how lanterns and other fittings contribute to a home that feels safe after dark.
A little care each season keeps lanterns looking good. Wipe glass with warm soapy water to remove grime and cobwebs, and clear leaves and insects from inside the frame. Check seals and gaskets on mains fittings each spring. For portable lanterns, bring rattan and wooden designs inside over winter, and store rechargeable units somewhere dry with a little charge in the battery.
Painted metal benefits from a quick inspection for chips, especially near the coast. Touching up small marks early stops corrosion from spreading beneath the finish.
Once you have answered those questions, choosing becomes far more straightforward. You can explore lanterns, garden furniture and indoor lighting together at Furniture in Fashion.
A common approach is to mount it slightly above eye level, roughly in line with the upper part of the door, so it lights faces and the lock without causing glare.
Only if it carries a suitable outdoor IP rating. Indoor lanterns are not designed to cope with rain, frost or condensation.
Some are, particularly in summer, but output falls in winter. For an entrance used every night, a mains lantern is usually more dependable.
Choose aluminium or well coated steel, clean it occasionally and touch up any chips in the paint promptly.
Matching finishes at the front of the house looks orderly. In the back garden, you can mix styles more freely, keeping one common thread such as colour or material.
Finish is one of the first things people notice about exterior lighting, yet it is…
Coach lights suit a Victorian terrace because they belong to the same era of design.…
The best opal glass bathroom lights for a minimalist look are simple flush ceiling fittings,…
The bulb shape that looks best in a PIR sensor light depends on the fitting…
Dusk to dawn lights switch themselves on as daylight fades and off again when morning…
A pendant light is one of the most effective ways to give a master en…
This website uses cookies.