How To Guide For Your Home Blog

August 16, 2026

How Do You Find Hole in Blow up Bed?

The quickest way to find a hole in an air bed is to inflate it fully, mist the surface with soapy water and watch for growing bubbles, starting at the valve and working along the seams before checking the flat surfaces and underside. This guide sets out each method in order, from listening in a quiet room and feeling for moving air on damp skin, through to the water bath test for stubborn leaks and how to dry the bed properly afterwards. It explains why valves and corner seams fail most often, how to prepare a flocked surface so a patch actually bonds, and how long to leave a repair to cure. We also cover simple habits that prevent punctures, and when a sofa bed or proper guest bed makes more sense than another repair....

August 16, 2026

How Do You Stop Bed Squeaking?

Most squeaking beds are fixed by tightening every bolt on the frame and then padding the points where two components rub together, because loose fixings cause the majority of cases. This guide shows how to locate the exact source of the noise before you start, how to tighten a frame without stripping the threads, and what to do about slats that shift in their holders or crack under load. It also covers mattress noise from worn coil springs, the right materials to reduce friction on wooden and metal frames, dealing with creaking suspended floors, and the twice yearly maintenance habit that keeps a bed quiet for years....

August 16, 2026

How Do You Secure a Headboard to a Bed Frame?

Fitting a headboard is straightforward once you know which fixing system you are dealing with. This guide covers the three you will meet in British homes: bolt through fixings on wooden and upholstered bed frames, strut fixings that attach to a divan base at an adjustable height, and wall mounted panels that never touch the bed at all. We explain why both bolts should be started loosely and tightened in an alternating pattern, how to set strut height against your mattress depth so the panel is not half hidden, and what to do when a fixing works loose or a thread strips. There is also a short checklist to run through after fitting, guidance on retightening intervals, and advice on when a damaged headboard is better replaced than repaired. There is also help with choosing panel height, and simple fixes for the tapping noise a headboard can make against the wall....

August 16, 2026

How High Should a Bed Be?

In most UK homes the top of the mattress should sit between 55cm and 65cm from the floor, with 60cm the figure that suits the widest range of adults. This guide shows how to test the right height for your own body by checking the angle of your knees when sitting on the edge of the bed, then explains how frame height, mattress depth and toppers combine to create the total figure. It covers low platform frames and the rooms they suit, taller divan and ottoman bases where storage matters, and the heights that work best for children, older adults and anyone with reduced mobility. We also look at how bed height affects the proportions of a room, and how to match bedside furniture and rugs to it....

August 16, 2026

How Do You Attach a Bed Headboard?

Bed headboards attach in three main ways: bolted to the bed frame, bolted through a divan base, or mounted to the wall on brackets or a cleat. This guide starts by helping you identify which type you have, then walks through each method step by step, including the tools required and the order in which to tighten bolts so everything lines up. It covers choosing a sensible height and getting the panel level in older UK homes where skirting boards rarely are, plus fixes for the usual problems: misaligned bolts, stripped divan threads, missing hardware and headboards that knock against the wall. There is also guidance on when wall mounting is the safer option for heavier upholstered or solid timber panels....

August 16, 2026

How Do You Make Folding Bed?

Making a folding bed comes down to three things done well: rigid panels, hinges strong enough for the fold, and legs that carry real load. This guide sets out a single width bifold build using 18mm birch plywood over a softwood perimeter frame, with recessed hinges mounted so the panels close face to face and the mattress is protected inside the fold. We cover material sizes and hardware choices, why ventilation holes or slats are essential to stop damp forming in a cool spare room, and the three leg designs that work in practice, from folding table legs to gate legs and cross braced supports. There is guidance on choosing a foam mattress that tolerates folding, finishing and load testing the frame safely, and an honest comparison with sofa beds, bunk beds and compact frames if a manufactured option would suit your room better....

August 16, 2026

How Do You Choose a Bed?

Choosing a bed becomes straightforward once you work through it in the right order: room measurements first, then base type, then mattress, then frame style. This guide walks through each stage with practical figures, including UK bed sizes from single to super king, the access space needed around each one, and how much external frame dimensions can differ from the mattress size. It compares slatted, divan, drawer and ottoman bases, explains how pocket sprung, foam, hybrid and latex mattresses behave for different sleepers, and looks at what fabric, wooden, metal and gloss frames each suit. Headboard proportion, storage planning, frame longevity and access through narrow stairs are covered, closing with answers to the questions buyers most often ask....

August 16, 2026

How Do You Select a Bed?

Selecting a bed becomes far simpler when you take the decisions in the right order: room size first, then mattress support, then storage needs, and finally the frame itself. This guide walks through each stage with the measurements that matter, including how much walkway space to allow on each side, how to match mattress firmness to your sleeping position and weight, and when an ottoman base beats a drawer base. We look at what fabric, wood, leather and metal frames each bring to a room, how headboard height and bed height affect everyday comfort, and the access checks worth making before you order. Written for real UK bedrooms with awkward chimney breasts, tight landings and limited floor space, it gives you a clear framework rather than a list of styles....

August 16, 2026

How Do You Clean Bed Mattress?

Cleaning a mattress well is less about scrubbing and more about controlling moisture, since fillings hold water long after the surface feels dry. This guide walks through the full sequence: stripping and vacuuming the seams where most debris collects, treating sweat, urine and blood stains with the right solution for each, deodorising with bicarbonate of soda, and drying properly before the bed goes back together. It also covers how often to repeat the routine, why slatted bases and protectors reduce the work, what genuinely helps with dust mites in UK bedrooms, and the signs that tell you a mattress needs replacing rather than cleaning....

August 16, 2026

How Do I Make a Murphy Bed?

Making a Murphy bed comes down to three stages: building a rigid wall cabinet, bolting it securely into structural brick or timber studs, then hanging a timber bed frame inside it on pivot brackets with a counterbalance kit doing the lifting work. This guide walks through choosing between a vertical and horizontal fold based on ceiling height and wall width, selecting plywood or MDF for the carcass, and why buying a properly rated hardware kit matters far more than improvising with salvaged hinges and springs. It covers assembling the cabinet square, spreading wall fixings across two rows, hanging the frame with a helper, fitting the retaining strap and testing the action before the mattress goes on. There is practical advice on mattress depth, finishing the cabinet so it reads as fitted joinery, flanking storage ideas, and an honest look at when a sofa bed is the better choice for your room....