Bar Furniture Blog UK – Modern Bar Tables, Bar Stools & Home Bar Ideas

August 10, 2026

How Do You Refurbish Bar Stools?

Refurbishing bar stools works best in a set order: repair and tighten the frame first, refinish the timber or metal next, replace worn hardware such as gas lifts and glides, then recover the seat last. This guide covers each stage in practical detail, starting with an honest inspection that tells you whether a stool is worth the effort at all. It explains how to fix stripped screw holes and loose joints, how to sand and finish timber without a gritty result, how to prime and paint metal frames, and how to measure a gas lift cylinder correctly before ordering a replacement. There is also clear guidance on when the combined cost of parts makes replacement the more sensible choice. Along the way it explains why working in this order saves you repeating jobs, and which repairs are best left to a professional upholsterer rather than attempted at home over a weekend....

August 10, 2026

Do My Bar Stools Have to Match Dining Chairs?

Open plan living put bar stools and dining chairs in the same sightline, and matching sets became the default answer to a question that deserves more thought. This piece explains why coordination usually reads better than duplication, and how a single shared thread, whether a timber tone, a metal finish or a colour family, is enough to tie two seating groups together. It looks at how deliberate contrast works when it is held to one dimension, how room size and sightlines change the answer, and why the visual weight of both groups needs to stay comparable. There is also practical guidance on the different demands the two seats face, from wipeable island seating that copes with daily breakfasts to softer dining chairs built for longer meals, plus advice on using lighting and accessories to zone a space naturally....

August 10, 2026

How Do You Replace Bar Stool Seat?

A worn seat rarely means the end of a bar stool, since frames, footrings and gas lifts usually outlast upholstery by years. This guide covers both practical routes: fitting a ready made replacement seat, and recovering the one you already have. We explain how to identify your seat construction before dismantling anything, why screws should be undone and retightened in a diagonal pattern, and how to handle fixing holes that do not line up without damaging the mounting plate. The reupholstery section covers foam selection, using the old cover as a template, adding wadding for a smoother finish, and the centre outwards stapling method that keeps tension even around corners. We finish with the checks to make once the seat is refitted, including how thicker foam affects leg room, and the clear signs that replacing the whole stool is the better decision....

August 10, 2026

How Do You Make Bar Stool Covers?

Making your own bar stool covers is one of the quickest ways to refresh a kitchen without replacing the seating. The basic method is simple enough for a first sewing project: trace the seat shape, add a seam allowance plus the depth of the pad, cut two pieces and thread elastic through a casing so the cover grips underneath. This guide compares drawcord, fitted and tie on covers so you can pick the approach that suits your seat shape, then explains how to choose a fabric that will survive a busy kitchen rather than wearing through at the edge. It walks through templating, notching curves, adding piping for a crisper edge and finishing the underside with press studs. There is also practical advice on washing, on stopping a cover from twisting, and on covering a seat that cannot be unscrewed from the frame....

August 10, 2026

How Many Bar Stools for 10 Foot Bar?

A 10 foot bar of roughly 305cm takes four to five stools, and which of those two numbers is right depends entirely on how the counter will be used. This article explains the 60cm per person spacing rule and the shoulder width and reaching room it is built from, then shows how to calculate your own figure from usable edge length rather than total length. We cover the deductions that catch people out, including walls at one end, corner positions on L shaped bars, support legs and wide pedestal bases that collide beneath well spaced seats. There is guidance on the clearance needed behind seated people in a working kitchen, how peninsula and stepped island layouts change the count, why slim frames suit long runs better than bulky upholstered ones, and practical notes on noise and light in UK kitchen extensions. We close with spacing arrangements along the run and the case for storing a spare stool....

August 10, 2026

Why Does My Bar Stool Keep Going Down?

A bar stool that sinks the moment you sit on it is usually telling you that its gas cylinder has lost pressure, and no amount of tightening will bring it back. This guide explains how the sealed nitrogen cylinder works, why seals fail, and how to rule out the simpler causes first, from a lever that is not returning to neutral to a loose locking collar or seat plate bolts. It walks through replacing a cylinder at home, including the three measurements you need before ordering and the safety points that matter. There is also advice for fixed height stools that feel unstable for entirely different reasons, plus the everyday habits that extend the life of any adjustable seat....

August 10, 2026

Where to Buy Cheap Bar Stools?

Finding affordable bar stools is straightforward, but telling a well made inexpensive stool from one that loosens within months takes a little more knowledge. This article looks at where genuine value sits, from multipack sets and clearance stock to seasonal range changes, and explains why buying two or four together almost always costs less per seat. We cover the construction details that matter at the lower end: solid rather than hollow frames, welded or bolted footrests, substantial fixings and stable gas lift mechanisms. There is guidance on where not to economise, including seat height and stability, which inexpensive materials genuinely perform well in a UK kitchen, and how to read an online listing properly so the stools that arrive are the ones you expected....

August 10, 2026

Can O Remove the Arms of the Bar Stool?

Removing the arms from a bar stool is possible on many designs, but it depends entirely on how the stool was built. This guide shows you how to tell the difference in three quick checks: look for bolts under the seat, look for a seam or bracket where the arm meets the shell, and work out whether the arm carries any of your weight. Where the arms are a separate bolted stage, we explain how to take them off without marking the finish, how to deal with the holes left behind, and how to test the stool afterwards for any new flex. Where the arms are welded or moulded into the frame, we explain why cutting them is never the answer. There is also practical measuring advice for worktop clearance and seat width, plus low arm, swivel and armless alternatives that solve the same problem more elegantly....

August 10, 2026

How Do You Shorten a Bar Stool?

Shortening a bar stool depends entirely on how it is built. A gas lift stool needs a shorter cylinder rather than a saw, a four legged stool can be cut down from the bottom of each leg, and a threaded column stool often has more range left than the owner realises. This guide covers all three routes, including how to transfer one measurement across four legs, why masking tape gives a cleaner cut, and how a cut affects the footrest height that most people forget to check. It also explains why cutting a pressurised gas cylinder is unsafe, the two to three inch practical limit before proportions suffer, how to level a stool that rocks afterwards, and how to seal cut timber and metal so a kitchen floor stays undamaged....

August 10, 2026

How Tall Should Bar Stools Be for a 36 Counter?

A 36 inch counter is the standard surface height in most British kitchens, and it calls for a seat height of 24 to 26 inches rather than a true bar stool. This guide explains where that figure comes from, why UK base units and worktops combine to make 36 inches the reference point, and how to check your own counter rather than trusting the standard. We cover the 25cm to 30cm clearance window that decides comfort, how it shifts for taller and shorter people, and how cushion padding and compression can quietly move a listed height by several centimetres. There is practical guidance on footrest position, backrest height and whether stools will tuck fully under an overhang, along with spacing figures for working out how many seats a counter run will take. Useful reading before ordering seating for a kitchen island....

Bar

Bar Furniture Blog UK – Modern Bar Tables, Bar Stools & Home Bar Inspiration

Shop Modern Bar Furniture Ideas UK – Bar Tables, Bar Stools, Breakfast Bars & Home Bar Trends

How Do You Refurbish Bar Stools?

Do My Bar Stools Have to Match Dining Chairs?

How Do You Replace Bar Stool Seat?

How Do You Make Bar Stool Covers?

How Many Bar Stools for 10 Foot Bar?

Why Does My Bar Stool Keep Going Down?

Where to Buy Cheap Bar Stools?

Can O Remove the Arms of the Bar Stool?

How Do You Shorten a Bar Stool?

How Tall Should Bar Stools Be for a 36 Counter?

Subscribe to our newsletter

Twitter Feed

Subscribe to our newsletter