Bar Furniture Blog UK – Modern Bar Tables, Bar Stools & Home Bar Ideas

August 11, 2026

How Do You Assemble Adjustable Height Swivel Bar Stool?

Assembling an adjustable height swivel bar stool follows the same order almost every time: base to column, column into collar, footrest onto the column, swivel plate to the seat underside, then seat onto the piston. This guide walks through each stage with the details that catch people out, including why the seat feels loose until someone sits on it, why the gas cylinder taper needs no bolt, and why the footrest must be positioned before the seat goes on. It also covers checking bolt lengths, leaving base fixings slack until final alignment, orientating the swivel plate so the lever does not catch knees, tightening in a diagonal pattern, and the routine checks that keep a swivel stool tight through years of daily kitchen use....

August 11, 2026

How Many Inches Between Bar Stools?

Six to ten inches between bar stool seats is the working range, which translates to twenty six to thirty inches measured centre to centre once seat width is accounted for. This guide explains why centre to centre planning is more reliable than a fixed gap, and why counter seating needs more lateral room per person than a dining table where you can angle your chair. It covers measuring the genuinely usable counter length, how backless, low back and armed designs change the numbers, the extra separation needed where seating turns a corner, and the clearance required both behind the row and beneath the overhang for knees. There is also practical advice for short runs in small UK kitchens, including when two well spaced stools beat three squeezed in, and how to keep a row looking evenly planned....

August 11, 2026

What Height Bar Stool for 36 Inch Counter?

A thirty six inch counter is the standard worktop height in most British kitchens, and it calls for a counter height stool with a seat between twenty four and twenty six inches. This guide explains the clearance rule behind that figure, then shows how to measure your own counter accurately, including why finished floor level and worktop thickness both matter. It sets out the difference between counter height and bar height seating so the wrong category is never ordered by mistake, and explains how to read a specification when seat height and overall height are easily confused. Further sections cover where to sit within the acceptable range depending on the height of the people using the counter, how seat padding and added cushions change the effective height, why a footrest matters once feet leave the floor, and the knee room the counter itself has to provide....

August 11, 2026

How Do You Assess Bar Stools?

Bar stools work harder than most seating: they are climbed onto rather than sat into, they carry weight at height and they take daily knocks in a kitchen. This guide sets out a five point assessment covering the frame and joints, seat height against your own counter, padding and upholstery quality, swivel or gas lift mechanisms, and stability under real weight. We explain what a sound weld looks like, how to test foam at the front edge where wear begins, and the specific signs that a gas cylinder is losing pressure. There is also guidance on weight capacity figures, footrest positioning, floor protection, and how to judge stools you already own to decide whether tightening, recovering or replacing is the right call....

August 11, 2026

How Do You Choose Bar Stools Kitchen Height?

Choosing the right bar stool height for your kitchen starts with identifying which surface you are actually sitting at, since a fitted worktop, a raised breakfast bar and a dining table all need different seating. This guide explains the standard UK heights for each, why you measure to the underside of the worktop rather than the top, and how to decide where to land within the 25cm to 30cm clearance range depending on who uses the stools. It also covers when adjustable gas lift stools make sense, why footrest position and seat depth become more important as height increases, and how total height affects a small kitchen....

August 11, 2026

What Height Bar Stools for 42 Inch Counter?

A 42 inch counter is about 107cm, which puts it firmly in the bar height category rather than the standard worktop category. This guide gives the seat height you need, roughly 30 to 32 inches or 76cm to 81cm, and shows the calculation in both imperial and metric so you can check it against any surface. It explains why counter height stools leave an uncomfortable 16 inch gap, how a thick stone or timber top quietly reduces your clearance, and why footrests and base width become far more important as seat height rises. There is also advice on knee room and overhang on narrow raised bars, choosing adjustable stools by their maximum height, spacing and walkway clearance, and what to do if you have already bought the wrong size....

August 11, 2026

How Do You Build Wicker Bar Stools?

Building a wicker bar stool happens in two stages: construct a rigid frame in hardwood or powder coated aluminium, then weave the seat and side panels in rattan cane or synthetic material. The frame carries every bit of the load, so it needs proper joints, splayed legs and a fixed footrest before any weaving begins. This guide covers cutting and squaring the frame, choosing between natural cane and synthetic weave, soaking rattan so it dries tight rather than cracking, laying warp and weft strands with even tension, and finishing corners and edges so no staples show. We also explain why natural wicker belongs indoors while synthetic weave suits a garden bar, how long the work realistically takes, and the bracing details that separate a stool which stays steady from one that loosens after a season of use....

August 11, 2026

How Do You Make a Swivel Bar Stool Stationary?

Making a swivel bar stool stationary means fixing the two halves of the mechanism so they can no longer move independently. Two short screws driven through the swivel plate into the seat board is the quickest dependable method, while removing the plate entirely and refitting the seat on a plywood spacer is the permanent one. This guide explains how to identify your mechanism, why diagonal fixings hold better than a single screw, and how to protect your seat height when the plate comes out. We also cover why gas lift stools resist being fixed, the alternatives worth trying first, and how to choose static seating from the outset....

August 11, 2026

How Tall Should Bar Stools Be for 36 Inch Counter?

A 36 inch counter equals 91cm, which is standard worktop height in most British kitchens and calls for counter height stools rather than true bar stools. This guide gives the seat height range that works, explains the simple arithmetic behind it, and shows why the popular 30 inch bar stool leaves far too little knee room at a worktop. It covers measuring properly from the finished floor, checking the obstructions and overhang underneath that quietly reduce clearance, deciding between fixed and adjustable seating, and working out how many stools a given island run will genuinely take. There are also notes on backs and footrests at this height, matching finishes to cabinetry, the errors people make most often, and a quick test to run before ordering....

August 11, 2026

How Do You Cut Legs off Bar Stool?

Shortening bar stool legs is a straightforward job when the marking and cutting are done in the right order. This guide sets out the full process: measuring each leg separately, scribing a line parallel to the floor on splayed frames, using masking tape and a mitre box for a square cut, then levelling and sealing the ends afterwards. We explain how to handle timber and metal tube differently, what to do when a footrest ends up too close to the floor, and which frames should never be cut at all. There is practical advice on floor protectors, touch up finishes and when replacing the stools makes more sense than modifying them. We also cover working safely with clamps and glasses, how to approach sled bases, cross braced frames and adjustable feet, and why every fixing should be rechecked a week after the job is finished, once the frame has settled into its new proportions under daily use....

Bar

Bar Furniture Blog UK – Modern Bar Tables, Bar Stools & Home Bar Inspiration

Shop Modern Bar Furniture Ideas UK – Bar Tables, Bar Stools, Breakfast Bars & Home Bar Trends

How Do You Assemble Adjustable Height Swivel Bar Stool?

How Many Inches Between Bar Stools?

What Height Bar Stool for 36 Inch Counter?

How Do You Assess Bar Stools?

How Do You Choose Bar Stools Kitchen Height?

What Height Bar Stools for 42 Inch Counter?

How Do You Build Wicker Bar Stools?

How Do You Make a Swivel Bar Stool Stationary?

How Tall Should Bar Stools Be for 36 Inch Counter?

How Do You Cut Legs off Bar Stool?

Subscribe to our newsletter

Twitter Feed

Subscribe to our newsletter