Bar Furniture Blog UK – Modern Bar Tables, Bar Stools & Home Bar Ideas

August 12, 2026

How Do You Disassemble a Hydraulic Bar Stool?

Taking a gas lift stool apart looks intimidating because of the cylinder, but the job is more straightforward than most people expect. This guide explains the sequence: lower the seat fully to release the extension, turn the stool over onto a blanket, unbolt the seat plate, then separate the cylinder from both the swivel mechanism and the base. The key insight is that the cylinder is held by tapered friction fits rather than fixings, so it responds to even taps from a rubber mallet and a firm twist rather than force. We cover the small tool kit needed, dealing with corrosion in damp rooms, removing a seized footring, and why the tapers must never be greased on reassembly. There is also clear guidance on when a replacement cylinder is the answer and when a cracked base means the stool should be retired....

August 12, 2026

How Do You Build Your Own Bar Stools?

Building your own bar stools starts with choosing a construction method and drawing the stool properly, because a seat carrying an adult at height puts far more stress into its joints than a dining chair does. This guide compares three practical routes for a home workshop: a welded or bolted steel frame with a timber seat, a solid timber frame with mortise and tenon joints, and a threaded pipe and board build that needs no welding. It explains how to derive seat height, footrest position and floor footprint from your counter, why the footprint must be wider than the seat, and how triangulation converts levering loads into compression. There is detail on offsetting tenons inside a leg, using thread lock on pipe joints, dishing or chamfering the seat for comfort, sealing end grain against mopped floors, and judging honestly whether building beats buying....

August 12, 2026

How Do You Take Apart a Bar Stool?

Taking apart a bar stool depends entirely on which type you have. A gas lift stool has few parts but the column is held in the base by a tapered friction fit that needs tapping out rather than unscrewing. A bolted four leg frame comes apart in reverse assembly order, while a glued frame is not designed to separate at all. This guide walks through identifying your stool, the tools to gather, removing the seat safely, releasing a stubborn gas lift column, dismantling a bolted frame without straining the joints, stripping an upholstered seat for recovering, and recognising when a fault means replacement rather than repair....

August 12, 2026

How Far Should a Bar Stool Be from the Counter?

Distance from the counter is not a single measurement but four working together: overhang depth, vertical clearance, spacing between seats and walkway room behind. This guide gives working figures for each, explaining why 25cm to 30cm of overhang allows someone to sit square to a worktop, how thick stone tops and deep aprons reduce the leg room you thought you had, and why swivel stools need wider spacing than fixed ones. We cover the walkway clearance that decides whether counter seating is viable in narrow UK galley kitchens, the problem of appliance doors opening across the route, and the specific difficulties of corner and peninsula seating. There is also a simple five minute test using a dining chair before you commit to buying....

August 12, 2026

How Do You Build Swivel Counter Height Bar Stools?

Building a swivel counter height bar stool is achievable in a home workshop once you know that the swivel plate is a bought component and the accuracy sits in the base and seat level. This guide covers choosing between a four legged splayed frame and a column base, the timber and hardware worth using, and how to work backwards from your worktop so the finished seat lands at the right height after padding and the plate are accounted for. It walks through building and squaring the frame, adding a proper mounting block, centring and fitting the swivel plate, shaping and upholstering the seat, and finishing timber that will live in a kitchen. There is also a candid comparison of building your own against buying a matched set....

August 12, 2026

Do Bar Stools and Dining Chairs Have to Match?

Bar stools and dining chairs do not have to match, and in most open plan UK homes they look better when they relate to one another instead. The question worth asking is not whether they are identical but whether they clearly belong together, which usually comes down to sharing a frame finish, an upholstery tone or a shape language. This guide explains why buying the same seat in two heights can flatten a room, which three elements are worth keeping constant, and how to coordinate without repeating. It also covers the situations where matching genuinely is the right call, how many materials a room can carry before it starts to feel unresolved, why near miss timber tones are more jarring than clear contrast, and why the height difference between a stool and a chair is never the problem people fear....

August 12, 2026

How Many Bar Stools for 9 Foot Island?

A 9 foot island, or 108 inches, comfortably seats four bar stools along one long side, three if those stools have wide seats and arms, and up to five with slim backless designs. The figure comes from allowing 24 to 30 inches of counter width per person measured centre to centre and keeping a 6 inch margin at each end so nobody sits on a corner. This guide shows how to run the calculation for your own island, when it makes sense to add a stool on the short end, and why the width of the stool itself is not the same as the width each person needs. We also cover overhang and knee room, the walkway depth that decides whether seating gets used, visual balance along a long run, and the materials that cope with a busy family island....

August 12, 2026

How Do You Assemble Aldo Bar Stool?

Assembling an Aldo bar stool is a fifteen to twenty minute job that follows the same four stage sequence used by most gas lift designs. This guide covers laying out and identifying the parts, fixing the base plate to the column squarely, setting the footrest ring at the right height, orientating the mounting plate correctly on the seat, and pressing the taper joint home so the stool feels solid from the first sitting. It also explains how to test the gas lift and swivel, diagnose the wobble and angled seat problems that most often occur, match a set of stools to a consistent height, and care for the chrome column afterwards....

August 12, 2026

What Is Bar Stool Height for Kitchen Counter?

Kitchen counters are more consistent in height than freestanding bars, which makes choosing stools for them relatively simple once you know the target figures. This guide gives a quick reference for the counter heights found in British homes, explains why fitted kitchens tend to land in the low nineties, and shows how worktop thickness and new flooring can shift the number you should be working from. It looks at how islands, peninsulas and raised breakfast bars each need to be measured differently, particularly where two heights appear in the same run of joinery. There is practical help on reading a product specification so seat height is never confused with overall height, guidance on fixed versus adjustable seating at a worktop, and notes on seat depth, footrests and materials. Sections on spacing, circulation space and visual weight in small kitchens complete the picture....

August 12, 2026

How Much Space Between Bar Stool and Counter?

Ten to twelve inches between the seat top and the underside of the counter is the measurement that decides whether counter seating gets used daily or quietly ignored. This guide shows how to calculate the right seat height from your own counter, starting at the worktop underside rather than the top surface, and explains why chunky stone tops and support rails quietly remove clearance people have already counted on. It covers the horizontal overhang needed for knees, when adjustable gas lift stools are the sensible answer for mixed height islands, how seat padding compresses under weight and shifts the effective gap, and where to set a footring so legs are supported. There is also a simple cushion and dining chair test that lands your target seat height by feel before you order....

Bar

Bar Furniture Blog UK – Modern Bar Tables, Bar Stools & Home Bar Inspiration

Shop Modern Bar Furniture Ideas UK – Bar Tables, Bar Stools, Breakfast Bars & Home Bar Trends

How Do You Disassemble a Hydraulic Bar Stool?

How Do You Build Your Own Bar Stools?

How Do You Take Apart a Bar Stool?

How Far Should a Bar Stool Be from the Counter?

How Do You Build Swivel Counter Height Bar Stools?

Do Bar Stools and Dining Chairs Have to Match?

How Many Bar Stools for 9 Foot Island?

How Do You Assemble Aldo Bar Stool?

What Is Bar Stool Height for Kitchen Counter?

How Much Space Between Bar Stool and Counter?

Subscribe to our newsletter

Twitter Feed

Subscribe to our newsletter