When buying outdoor wall lights, check five things in order: the IP rating for where the light will be mounted, the material and finish of the body, the type of light it gives (down, up and down, or all round), the power source and controls, and the size relative to the door or wall it will sit on. Getting those right means the fitting will last, light the right area and look in proportion. Style, while important, comes after these practical decisions.
This guide works through each of those points in turn, followed by advice on placement, installation and care. Our full modern outdoor wall lights UK sale collection covers every style mentioned here, and it forms part of our wider modern lighting UK range for the whole home.
The IP, or Ingress Protection, rating tells you how well a fitting resists solids and water. It is written as two digits. The first relates to dust, the second to water. For outdoor wall lights, the second digit is the one to focus on.
| Rating | Protection against water | Typical outdoor use |
|---|---|---|
| IP44 | Splashing from any direction | Sheltered walls, porches, under eaves |
| IP54 | Splashing, with better dust protection | Most house walls |
| IP65 | Low pressure water jets | Exposed walls, coastal homes, areas cleaned with a hose |
| IP66 and above | Powerful jets | Very exposed positions |
If in doubt, choose a higher rating. A wall that seems sheltered in summer can be lashed by wind blown rain in winter.
Die cast or extruded aluminium is light, strong and does not rust. With a powder coated finish, it is the most common choice for modern outdoor wall lights.
Stainless steel suits contemporary homes and coastal areas, though lower grades can show tea staining near the sea. Marine grade stainless steel performs better in salty air.
Solid metals develop a natural patina over time, which many people love on period homes. They are heavier and highly durable.
Tough, UV stable plastics are practical for low level or high traffic positions. They resist impacts and do not corrode.
Matching the type of light to the job is key. A front door needs light on faces and the lock. A patio wall may need a softer, broader glow. A side passage needs safe, even light with minimal glare.
Mains powered wall lights give consistent, reliable light all year and offer the widest choice of designs. They need to be installed by a qualified electrician, and new outdoor circuits may need to comply with Building Regulations.
Solar wall lights need no wiring, which makes them useful for sheds, fences and rented homes. Their output is lower and drops in winter, so they are better as a supporting light than as the main fitting beside a door.
Choose controls based on how you use the space. A front door light might suit dusk to dawn, while a side passage might be better on a sensor.
Outdoor wall lights generally need less output than people expect. A modest light beside a door is enough to see clearly, and too much light causes glare and shadows. Look at the lumen figure rather than wattage, since LED wattages are much lower than older bulbs.
Colour temperature affects the mood:
Undersized fittings are one of the most common mistakes. A small wall light on a large wall or beside a tall door looks lost. As a rough guide:
It helps to cut out a piece of card the size of the fitting and tape it to the wall before ordering.
Keep fittings away from places where they will shine into windows, yours or your neighbours’.
Through glazed doors, indoor and outdoor lights are often seen together. Choosing similar shapes or finishes for modern indoor wall lights UK in the hallway or kitchen and for the fittings outside creates a quiet sense of continuity. It also makes the garden feel like an extension of the house when viewed from inside.
Outdoor wall lights can help make a home feel safer. Light the approaches to doors and gates, avoid deep shadows near the house and use sensors where lighting is needed only occasionally. If you are refreshing several fittings at once, our lighting UK sale section is a good place to look at a range of styles side by side. For more on placement and sensors, read our guide to outdoor lighting and security for UK homes.
Mains wall lights should be fitted by a qualified electrician, who will ensure the cable entry is sealed and the fitting is correctly earthed if required. Use stainless steel screws to prevent rust stains on the wall.
Clean fittings a few times a year with a soft, damp cloth and mild soap. Avoid abrasive cleaners. Check seals annually, clear cobwebs and leaves, and replace any cracked diffusers promptly to keep water out. Solar fittings need a little extra attention: keep the panel clean and clear of shade, and read our article on how solar lights cope with a UK winter to understand what to expect in the darker months.
Once the practical points are settled, style becomes easier to judge. Period homes, such as Victorian and Edwardian terraces, tend to suit lanterns, opal globes and simple bulkheads in black, bronze or aged brass. Interwar and post war houses often look good with understated, rounded shapes. Contemporary homes and new builds usually suit cylinders, cubes and flat profiles in black, graphite, white or stainless steel.
Look at the details already on the house. Window frames, door furniture, gutters and house numbers all have a colour and a character. Matching your wall lights to the most prominent of these, rather than trying to match everything, keeps the elevation calm and coherent.
The right outdoor wall light combines the correct IP rating, a durable material, a suitable light pattern and a size that suits its surroundings. Get those fundamentals right and you can choose the style with confidence. Explore our collections of indoor and outdoor lighting at Furniture in Fashion, with free delivery to most UK mainland postcodes. Returns are available up to 30 days.
IP44 is the usual minimum for sheltered walls. For exposed positions, coastal homes or anywhere a hose might reach, IP65 is a safer choice.
Solar wall lights can be fitted by anyone. Mains powered lights should be installed by a qualified electrician, and new outdoor circuits may need to comply with Building Regulations.
Downlights and shielded fittings that direct light toward the ground produce the least spill. Warm white lamps and moderate output also help.
For a typical patio beside the house, two fittings either side of the doors are often enough. Larger patios may benefit from additional lights along the wall or on a boundary.
They do not need to match exactly, but keeping to one or two metal tones on the same elevation looks more coherent.
For step lights in a pergola, a warm white of around 2700K to 3000K is…
Styling outdoor lights in a modern rustic home is about pairing simple, dark metal fittings…
Interior designers place cordless outdoor lamps in a front garden in the same way they…
Security lights can work on a contemporary pergola when they are treated as one layer…
To choose porch lights for a front door, start with the type of porch you…
PIR sensor lights and garden spike lights are both common in UK gardens, yet they…
This website uses cookies.