Furniture in Fashion Blog
Furniture in Fashion Blog
Furniture in Fashion Blog
A velvet bedside cabinet should sit roughly level with the top of your mattress, or up to about 5cm above or below it. For most UK beds, that means a cabinet height of somewhere between 55 and 70cm. Measure from the floor to the top of your mattress with bedding and any topper in place, then choose a cabinet within that range. Velvet pieces often look slightly softer and lower than they are, so if you are between two sizes, the taller option usually looks better beside an upholstered bed.
Our modern bedside cabinets UK sale range includes upholstered and velvet styles in a variety of heights. In this guide, we explain why height matters, how to measure correctly and how velvet changes the way a cabinet relates to your bed.
Why bedside cabinet height matters
Height is the most important measurement for any bedside cabinet. It affects comfort, practicality and how balanced the bed wall looks.
From a practical point of view, you want to reach a glass of water, your phone or a book without stretching up or reaching down. A cabinet level with the mattress lets you rest your arm naturally and set things down easily, even half asleep. Too low, and you lean over the edge of the bed. Too high, and you knock things off when reaching across.
Visually, height creates harmony. A bed and bedside cabinets that share a common line look calm and considered. When cabinets sit noticeably below or above that line, the arrangement can look unbalanced. This is especially true with velvet, where the softness of the fabric draws attention to shape and proportion.
How to measure your bed
Measuring properly takes a few minutes and avoids an expensive mistake.
- Make the bed as you normally would, with the mattress, any topper, a fitted sheet and your duvet.
- Measure from the floor straight up to the top surface of the mattress, at the point where the cabinet will sit.
- Note that figure. This is your target cabinet height.
- Measure the width available beside the bed, allowing room to walk past and open drawers.
- Check the height of the headboard and any wall lights or sockets that might be covered.
If you are buying a new bed at the same time, check its listed height to the top of the frame and add your mattress depth. Our modern bedroom furniture UK collection lists dimensions for beds and cabinets, which makes planning a coordinated set easier.
Typical heights for UK beds
Bed heights vary considerably, depending on the frame, the base and the mattress.
Low platform beds
Low frames with a slim mattress may only reach 40 to 50cm. A lower cabinet, or a small table on short legs, suits these beds.
Standard frames and divans
Most standard beds with a medium depth mattress come to around 50 to 60cm. Cabinets of 50 to 60cm sit comfortably alongside.
Tall upholstered and ottoman beds
Upholstered beds with deep mattresses, and ottoman storage beds with a lifting base, often reach 60 to 70cm. These need taller cabinets.
Velvet bedside cabinets are frequently paired with upholstered beds, which tend to be on the taller side. If you have a velvet or fabric bed, it is worth checking the height carefully rather than assuming a standard cabinet will fit. Our fabric beds UK sale range includes velvet and upholstered frames with dimensions listed for each design.
How velvet changes the picture
Velvet is a deep, plush fabric with a soft pile that catches and absorbs light. It affects how a bedside cabinet looks in several ways.
It softens edges
Upholstered cabinets often have padded or rounded edges. The top surface may sit slightly below the highest point of the padding. Check whether the listed height refers to the top surface or the highest point.
It adds visual weight
Rich velvet colours such as emerald, navy, rust and plum can make a cabinet look more substantial. A tall velvet piece can dominate a small room, so balance height with width.
It creates continuity
If your headboard is velvet, a matching or toning velvet cabinet carries the material across the bed wall. In this case, keeping the cabinet top level with the mattress creates a single, unbroken line that looks tailored.
Relating the cabinet to the headboard
Height is not only about the mattress. The headboard also plays a part in how balanced the bed wall looks.
With a tall headboard, a cabinet level with the mattress leaves a generous expanse of upholstery visible above it, which is attractive. With a low headboard, a cabinet that is too tall can compete. As a guide, try to leave at least 20 to 30cm of headboard visible above the cabinet top. If you plan a table lamp, consider its height too: the shade should sit roughly at shoulder height when you are sitting up in bed.
Thinking about mattress depth
Mattress depth has a big effect on overall bed height and is easy to overlook. A deep pocket sprung or hybrid mattress might be 30cm or more, while a slim memory foam mattress could be under 20cm. If you plan to change your mattress, factor in the new depth before buying cabinets. Our mattresses UK collection lists depths for each model, which helps when calculating the final height.
Toppers add height too. A thick topper can raise the sleeping surface by 5 to 10cm, which is enough to tip a cabinet from level to noticeably low.
Width and depth alongside height
While height is the priority, width and depth complete the picture.
- Width: For a double bed, cabinets of 40 to 50cm wide usually look balanced. For a king or super king, 50 to 60cm works well.
- Depth: A depth of around 35 to 45cm suits most rooms. Velvet cabinets with padded sides can be slightly deeper than their wooden equivalents.
- Clearance: Leave around 60cm between the cabinet and any obstacle so you can walk past comfortably.
For more detail on these figures, our guide to bedside table measurements for UK bedrooms covers each dimension step by step.
When to break the rule
Level with the mattress is a reliable guide, but there are times when a different height makes sense.
Very high beds
Some ottoman and box beds sit very high. A cabinet to match might look bulky. A slightly lower cabinet with a lamp that brings light up to the right level can be a good compromise.
Wall mounted lighting
If you use wall lights rather than lamps, the cabinet can be a little lower without affecting reading light.
Mixed pairs
If each side of the bed has a different cabinet, keep the heights within a couple of centimetres of each other so the arrangement still looks balanced.
Matching velvet cabinets to king size beds
King size beds are a popular choice for main bedrooms in UK homes, and they tend to have taller, more substantial headboards. The wider frame needs cabinets with enough presence to match. A velvet cabinet of 50 to 60cm wide, level with the mattress, keeps proportions comfortable. Our article on UK king size bed dimensions explains the frame, mattress and room sizes to consider.
Caring for velvet at bed height
A bedside cabinet is handled every day, and velvet needs a little care. Keep a coaster on the top for drinks, as spills can mark the pile. A glass or wooden top insert, found on some designs, protects the most used surface. Brush the velvet gently with a soft brush to lift the pile, and vacuum with an upholstery attachment occasionally. Avoid placing velvet furniture in strong direct sunlight, as deep colours can fade over time.
Checking listed dimensions
Product dimensions are usually given as width, depth and height, but upholstered furniture can be measured in different ways. Some heights are taken to the top of the padding, others to a flat top panel. If a velvet cabinet has a domed or piped top, the usable surface may be a centimetre or two lower than the quoted figure. When in doubt, compare the product image with the listed height and allow a small margin.
Getting the height right
The right height for a velvet bedside cabinet is the one that matches your mattress, with a few centimetres of leeway either way. Measure your bed fully made, check whether your cabinet height is quoted to the top surface, and consider your headboard and lamp together. Velvet looks its best when proportions are calm and lines are clean, so a little time spent measuring pays off. You can find velvet bedside cabinets and coordinating upholstered beds at Furniture in Fashion, with free delivery to most UK mainland postcodes.
Frequently asked questions
What is the standard height for a bedside cabinet?
Most bedside cabinets are between 50 and 70cm tall. The right height for you depends on your bed, as the cabinet should sit roughly level with the top of your mattress.
Should a bedside cabinet be higher or lower than the bed?
Ideally level, or within about 5cm either way. Slightly higher is usually easier to use than noticeably lower.
Do velvet bedside cabinets suit any bed?
They work especially well with upholstered beds and velvet headboards. They can also contrast nicely with a wooden or metal frame if the colour is chosen carefully.
How do I protect a velvet bedside cabinet from spills?
Use a coaster or a small tray on the top. Some designs have a wooden or glass top insert, which offers extra protection.

No Comments
Sorry, the comment form is closed at this time.