Furniture in Fashion Blog
Furniture in Fashion Blog
Furniture in Fashion Blog
To choose the right bollard lights for a roof terrace, start with four things: how the lights will be fixed without damaging the roof, how much wind and weather the terrace takes, how tall the bollards should be in relation to planters and balustrades, and how far the light should travel. On most UK roof terraces, short bollards between roughly 30 and 60 centimetres tall, with a downward or shielded light, a high IP rating and a weighted or surface mounted base, give the best balance of safety, atmosphere and practicality.
Roof terraces are very different from ground level gardens. They are exposed, often overlooked, structurally sensitive and usually compact. Bollards that look fine on a driveway can feel bulky or glaring up high. The aim is a set of fittings that guide feet, define edges and add a calm glow without dominating the view. Our modern outdoor lighting UK sale collection includes compact designs suited to these spaces.
Start With the Roof Itself
The single most important consideration is the roof structure beneath your terrace. Many roof terraces sit over a waterproof membrane, often with decking or paving supported on pedestals above it. Drilling through that membrane to fix a bollard can cause leaks that are expensive to put right.
Before buying anything, find out what you are working with. If you live in a flat, the freeholder or managing agent may need to approve any changes, and the lease may restrict what can be fixed to the roof. In a house, a roofer or builder can advise on safe fixing points.
Fixing options that protect the membrane
- Fixing to decking joists: Where decking sits on a raised frame, bollards can often be screwed into the timber or composite structure rather than the roof.
- Weighted bases: Some bollards can be fitted to a heavy base plate that sits on the surface, which avoids penetration altogether.
- Fixing into planters: Large built in planters can house small bollards or spike lights, keeping the fixing within the soil.
- Wall or parapet mounting: Where bollards are impractical, low level wall lights on parapets or upstands can do a similar job.
Consider Wind and Exposure
Roof terraces take far more wind than most gardens. A bollard that is too tall or too light can rock, loosen its fixings over time or simply look unsettled. Shorter bollards with a solid, compact profile tend to cope better.
Rain also behaves differently up high. It can arrive almost horizontally, and water can pool on flat surfaces. Look for bollards with an IP65 rating or above, which indicates protection against dust and water jets from any direction. Sealed cable entry points and corrosion resistant materials such as powder coated aluminium or marine grade stainless steel are worth prioritising.
Getting the Height Right
Bollard height has a big effect on how a roof terrace feels. Tall bollards, sometimes 80 centimetres or more, are designed for driveways and public spaces where light needs to travel. On a terrace, they can block views and look out of scale.
A useful approach is to relate the height to what is around the bollard:
- Next to low planting or seating, around 30 to 45 centimetres keeps light close to the ground.
- Alongside taller planters, around 50 to 60 centimetres lets the light rise just above the plants.
- Near glass balustrades, keep bollards low enough that their reflections do not dominate the view at night.
Shorter bollards also keep the light source below eye level when seated, which reduces glare.
Choosing the Light Pattern
Bollards come with different light distributions, and the choice affects both comfort and neighbourliness.
Downward light: The most considerate option. Light falls onto the deck or paving around the bollard, showing the walking surface without spilling upwards. This suits overlooked city terraces.
All round light: A diffused head that glows in every direction looks attractive but can create more glare and spill. Use it sparingly and at low output.
Directional light: Some bollards throw light to one side only. These work well along an edge, lighting a path while keeping light away from neighbours.
For most roof terraces, downward or directional light gives the best result. You can always add soft decorative light elsewhere if the space feels too subdued.
How Bright Should Roof Terrace Bollards Be?
Very little brightness is needed. Your eyes adjust quickly outdoors, and a roof terrace is usually small enough that a few low output fittings make it feel well lit. Many bollards between 100 and 300 lumens are plenty for this setting. Warm white at around 2700K to 3000K suits most terraces, keeping the mood relaxed and softening hard surfaces such as composite decking and porcelain.
Dimmable or smart bollards are worth considering. They let you raise the light for clearing up after dinner and lower it for a quiet drink, which is especially useful in a small space where every fitting is noticeable.
Placing Bollards Around the Terrace
Placement should follow how you use the terrace. A few common positions work well:
- At the access point: A bollard near the door or hatch from the flat helps with the transition from inside to out, especially where there is a step.
- Along routes: If a path runs between planters to a seating area, a bollard every two to three metres usually gives enough guidance.
- At changes in level: Steps between deck levels should always be clearly lit.
- Near edges: Gentle light near the perimeter helps people understand where the terrace ends, which adds to a sense of safety.
Avoid placing bollards in the middle of open areas, where they become obstacles. Edges, corners and planters are more natural homes.
Bollards as Part of a Layered Scheme
Bollards alone can make a terrace feel functional rather than inviting. Combining them with other light sources gives depth. Low wall lights on parapets, a little uplighting into a planted screen and a table lantern or two can turn a practical space into one you want to sit in. Looking across our modern lighting UK collection helps when planning how the terrace relates to the living space it opens from.
Screens and planting also help. On overlooked terraces, a slatted screen or tall grasses can block sightlines and bounce soft light back towards the seating area. Our garden screens UK range includes options that work well at height when properly secured. For relaxing in the evening, a pair of modern sun loungers UK sale with low bollards behind them creates a calm, resort style corner.
Power Options: Mains or Solar?
Mains wired bollards give reliable, consistent light and work with smart controls. They need cable routes, which can be tricky on a roof without disrupting the waterproofing, so plan wiring with an electrician early.
Solar bollards avoid cabling altogether, which makes them appealing for roof terraces. They tend to perform well in summer, when terraces are used most, but output can drop considerably in winter. Our article on solar garden lights and winter performance in the UK is worth reading before deciding.
A mix can work: mains bollards near the door and main routes, with solar fittings among planting at the far end.
Matching Bollards to Decking and Paving
The surface of your terrace affects how bollard light looks. Pale porcelain tiles and light stone reflect a great deal of light, so even very low output bollards will make the area feel bright. Dark composite decking absorbs light, which means you may need fittings slightly closer together to achieve the same sense of guidance.
Finish matters too. Graphite and anthracite bollards blend with dark decking and grey planters, while bronze or corten effect finishes add warmth beside timber. On a terrace with a glass balustrade, slimmer profiles in a dark finish tend to look neater than chunky square designs, because they interrupt the view less.
Think about daytime appearance as well. On a roof terrace, bollards are visible from inside the flat all day, so a design you like looking at matters as much as the light it gives at night.
Privacy and Neighbours
Roof terraces in towns and cities are often close to windows, bedrooms and other terraces. Bright or poorly directed lights can quickly become a nuisance. Choose shielded fittings, keep output low and use timers or schedules so lights switch off at a sensible hour. Our garden privacy and overlooking survey of UK homeowners offers useful context on how people feel about being overlooked, which applies equally to light spilling between homes.
A Quick Checklist
- Confirm how bollards can be fixed without damaging the roof membrane.
- Check lease or freeholder permissions if you live in a flat.
- Choose IP65 or higher and corrosion resistant materials.
- Keep heights modest, usually 30 to 60 centimetres.
- Prefer downward or directional light.
- Use warm white and low output, ideally dimmable.
- Plan placement around routes, steps and edges.
- Layer with wall, planter and table lighting.
To see bollards, outdoor furniture and screening together, browse our outdoor collections at Furniture in Fashion.
Frequently Asked Questions
Can I drill into my roof terrace to fit bollards?
Only with professional advice. Drilling through a waterproof membrane can cause leaks. Fixing to decking frames, planters or weighted bases is often safer.
What IP rating do roof terrace bollards need?
IP65 or above is a sensible minimum for exposed roof terraces, as it protects against dust and water from any direction.
Are solar bollards bright enough for a roof terrace?
They can be in summer, but output often drops in winter. Many people use solar for decorative light and mains for main routes.
How far apart should bollards be?
Along a route, every two to three metres usually provides enough guidance on a terrace. Adjust based on the light pattern of the fitting.

No Comments
Sorry, the comment form is closed at this time.