Furniture in Fashion Blog
Furniture in Fashion Blog
Furniture in Fashion Blog
To style path lights in a garden flat side return, keep the fittings low, slim and few in number, place them along one side of the path only, and space them so their pools of light just meet. Low bollards or wall mounted step lights around 30 to 50cm above the ground work better than tall posts in a narrow passage, and a warm white light reflected off the brickwork will make the space feel wider and calmer than bright light pointed straight down the middle.
Side returns in Victorian and Edwardian terraces are often the main route from the street or the kitchen into a garden flat’s outdoor space. They are narrow, frequently shaded and bordered by tall walls, so the lighting has to be practical first and attractive second. Our range of modern outdoor lighting UK sale includes compact path and wall lights that suit these tight spaces, and the advice below covers how to plan, place and style them.
Understanding the Side Return
A side return is the strip of outdoor space that runs alongside the rear extension of many terraced houses. In a converted garden flat, it might be the only external access to the garden, or it might form a small courtyard outside a kitchen window. Widths vary, but many are barely wider than a metre, with a solid wall on one side and the flat’s own walls and windows on the other.
That shape creates particular challenges. Light has nowhere to spread, so a bright fitting can feel glaring. Tall walls cast deep shadows, so the path can look darker than it actually is. And because windows often look directly into the passage, any lighting is visible from inside the flat, which means it needs to look good from the kitchen as well as from the path.
It is worth considering how the side return fits within the lighting of the whole home. Many garden flats have kitchens or living rooms that look straight out into this space, and coordinating finishes with the fittings indoors, such as those in our modern lighting UK range, helps the passage feel like part of the flat rather than a separate utility area.
Choosing the Right Type of Path Light
There are three main options for a side return, and each suits slightly different layouts.
Low bollards. Short bollard lights, usually between 30 and 60cm tall, sit at the edge of a path or in a narrow planting strip. They cast light downwards and outwards across the ground. In a side return, choose slim designs with a small footprint so they do not narrow the walkway further.
Wall mounted step and brick lights. Where there is no room for anything on the ground, lights set into or fixed onto the wall at low level are often the neatest answer. They throw light across the path at ankle or knee height, picking out the surface and any steps without taking up any space.
Spike lights in planting. If there is a border along one wall, small spike lights can light both the plants and the path edge at once. They are flexible and easy to reposition as plants grow.
Tall lamp posts and large lanterns are best avoided here. They tend to look out of scale and can dazzle anyone walking towards them.
Placing Lights Along One Side
In a narrow passage, lights on both sides can feel like a runway and make the space look busier than it is. Placing them along one side, usually the side opposite the windows, keeps the look calm and leaves the other wall to reflect light back softly.
Spacing depends on the brightness and beam of the fitting, but a useful starting point is to space lights so that the edge of one pool of light just reaches the next. In many side returns, that works out at somewhere between 1.5 and 2.5 metres apart. Test this before fixing anything permanently: lay the lights out after dark, switch them on and walk the route.
Pay particular attention to the start and end of the path. A light at the gate or entrance tells visitors where to go, and a light close to the garden end marks the transition into the open space. Any step or change in level should have its own light directly beside it.
Using the Walls to Your Advantage
The tall walls in a side return can feel oppressive in daylight, but at night they become a useful reflector. Light bounced off brickwork or pale render spreads gently through the space and makes it feel wider. A low wall light angled slightly upwards, or a spike light placed close to the base of the wall, will wash the surface and lift the whole passage.
Old London stock brick, with its warm tones and uneven texture, looks particularly good when grazed by light from below. Painted walls in white or soft stone colours reflect even more light, which is helpful in a very narrow or deeply shaded return.
Climbing plants on wires or trellis add another layer. Light passing through foliage casts moving shadows onto the wall behind, which softens the hard edges of the space.
Colour, Brightness and Glare
Warm white light, around 2700K to 3000K, suits most side returns, as it flatters brick, stone and planting. Cool white can look stark in a confined space and tends to make it feel colder.
Brightness should be modest. Because the space is enclosed, light does not dissipate as it would on an open lawn. A low output fitting will usually provide enough light to walk safely, especially once it is reflected off the walls. Look for fittings with shielded or downward facing light sources, so you see the light on the ground rather than the bulb itself.
If the flat has bedroom windows overlooking the return, be particularly careful about light spilling inside. Low fittings directed at the ground are far less intrusive than wall lights at head height.
Combining Path Lights With Seating and Storage
Many garden flat owners use a wider side return as a small courtyard, with a bistro set, a few planters or a narrow storage unit for bins and bikes. The path lighting can help define these zones.
A small table and two chairs tucked into a wider section of the return can be lit by a nearby wall light or a cordless lamp, giving a cosy spot for morning coffee or an evening drink. Our bistro sets UK sale include compact folding designs that suit narrow spaces and can be stored away when the passage needs to be clear.
For storage, a slim unit along one wall keeps the floor clear and gives path lights a clean backdrop. Position lights so they show the route around any furniture rather than lighting the furniture itself.
Power, Safety and Shared Access
Mains powered path lights give reliable, consistent light and are often controlled from a switch inside the flat. They should be installed by a qualified electrician, particularly as cables may need to run along walls or under paving. Low voltage systems are another option and can be simpler to install in a small space.
Solar path lights can work in a side return, but they depend on the panel receiving enough daylight. Many side returns are heavily shaded for much of the day, especially in autumn and winter, so solar lights may perform less consistently than in an open garden.
In converted houses, a side return is sometimes shared with an upstairs flat. If that is the case, agree on the lighting with your neighbours first. A sensor or a timer can be useful in shared spaces, as it ensures the path is lit when anyone uses it without relying on one household to switch the lights on. Our article on outdoor lighting and security for UK homeowners looks further at how lighting can support safety around the home.
Styling Ideas for Different Looks
For a contemporary flat, choose slim black or anthracite bollards with clean lines, set against grey paving and pale render. Pair them with tall grasses or bamboo in planters for a crisp, architectural feel.
For a period property, brass or bronze fittings complement original brickwork and Victorian tiled paths. Ferns, ivy and box balls in planters keep the look classic and shade tolerant.
For a softer, cottage feel, use spike lights tucked among planting along one side, with climbing roses or jasmine on the wall above. The light will pick out leaves and flowers, and the path itself will be lit indirectly.
At Furniture in Fashion, we stock outdoor lighting and compact garden furniture suited to the narrow spaces found in many UK homes, with free delivery to most UK mainland postcodes.
Frequently Asked Questions
How far apart should path lights be in a side return?
A good starting point is 1.5 to 2.5 metres, adjusted so each pool of light just meets the next. Test the spacing after dark before fixing lights permanently.
Should path lights go on both sides of a narrow passage?
Usually not. Placing them along one side keeps the space calm and allows the opposite wall to reflect light back across the path.
Do solar path lights work in a shaded side return?
They can, but performance depends on how much direct daylight the panels receive. In heavily shaded returns, mains or low voltage lighting tends to be more dependable.
What height of bollard suits a side return?
Low bollards of around 30 to 60cm are generally a good fit. They light the ground without dazzling anyone walking along the path.

No Comments
Sorry, the comment form is closed at this time.