Choose rattan effect outdoor lights if you want a soft, relaxed, textural look that suits lounge areas, coastal schemes and contemporary gardens. Choose weathered bronze if you want a timeless, architectural finish that suits period homes, front doors and wall mounted fittings. On practicality, weathered bronze generally copes better with constant exposure to British weather, while rattan effect lights perform best under some shelter or when brought indoors through winter.
Both finishes are popular for good reason, and both can look excellent. The right choice depends on where the light will live, what surrounds it and how much care you are prepared to give it. Our modern outdoor lights UK collection includes designs in both finishes, and our wider modern lighting UK sale range shows how the same materials translate indoors. Below, we compare them side by side.
Rattan effect lights use synthetic fibres, usually polyethylene or a similar resin, woven to resemble natural cane. The weave creates a lantern, globe or drum shade through which light filters in soft, patterned shadows. Unlike natural rattan, the synthetic version is designed to resist moisture and fading, which makes it suitable for outdoor use.
Weathered bronze describes a dark, mottled brown finish with hints of copper, gold or verdigris. On outdoor lights it is most often a powder coat or paint finish applied to aluminium or steel, designed to imitate the look of aged metal. Some higher end fittings use solid brass or bronze, which develops a genuine patina over time.
Rattan effect brings warmth and texture. It suggests holidays, beach houses and relaxed summer evenings. The woven pattern casts gentle shadows on walls and paving, which adds atmosphere without extra fittings. It sits naturally alongside rattan effect sofas, teak tables, linen cushions and plenty of planting.
It works particularly well in:
Weathered bronze is quieter and more architectural. It reads as solid and established, and it ages in a way that looks intentional. Against red brick, honey stone or white render, it adds depth without drawing too much attention.
It tends to suit:
This is where the two finishes differ most. Weathered bronze fittings in powder coated aluminium are generally built to stay outside year round. A good powder coat resists rain, frost and ultraviolet light, and minor scuffs tend to blend into the mottled finish.
Rattan effect fittings are water resistant but the weave has many small gaps and crevices. Over a long, wet British winter, these can collect dirt, moss and algae, particularly in shaded spots. The fibres themselves are usually tough, but the look can tire if the light is left fully exposed for years. Many owners place rattan effect lights under a pergola, parasol or veranda, or bring portable ones indoors over the colder months.
Weathered bronze needs very little care. A wipe with a damp cloth a few times a year keeps it looking good. Avoid abrasive cleaners, which can damage the finish.
Rattan effect needs a little more attention. A soft brush removes dust and cobwebs from the weave, and a gentle wash with mild soapy water every so often keeps it fresh. Rinse and let it dry fully before switching on again.
Rattan effect lights filter the light through the weave, producing a soft glow and decorative shadows. They are excellent for mood but less effective as task lighting. You would not want to rely on one to find your keys.
Weathered bronze lanterns usually have glass panels or a solid shade, giving a more directed and practical light. They are better suited to lighting a doorstep, a path or a set of steps.
Rattan effect lights are often portable: solar powered lanterns, rechargeable table lamps or plug in festoons. Weathered bronze is more commonly found in hardwired wall lights, post lights and pedestals, although portable lanterns in bronze finishes are also widely available.
| Consideration | Rattan effect | Weathered bronze |
|---|---|---|
| Overall look | Soft, textured, relaxed | Classic, architectural, understated |
| Best location | Seating areas, under cover | Front doors, walls, paths |
| Weather exposure | Best with some shelter | Comfortable fully exposed |
| Maintenance | Occasional brushing and washing | Occasional wipe |
| Light quality | Diffused, decorative | Directed, practical |
| Typical format | Portable lanterns and lamps | Wall, post and pedestal fittings |
Every outdoor material changes over time, and knowing how each finish ages helps you choose with confidence.
Weathered bronze has an advantage here: it is designed to look aged from day one. Small marks, water spots and gentle fading tend to blend into the mottled surface rather than stand out. A fitting that has been on a wall for several years often looks better than a new one, as though it has settled into the house. Solid brass and bronze go further still, slowly darkening and developing a natural patina that many homeowners find appealing.
Rattan effect ages differently. Good quality synthetic weave holds its colour well, but after several seasons outdoors the fibres can lose a little of their sheen, and dirt can settle into the weave. Lighter natural tones show this more than darker browns and greys. Regular cleaning keeps the look fresh, and lights kept under cover will look newer for much longer.
The exterior of your home is the backdrop for every outdoor light, so it should guide the decision.
You do not have to choose one finish for the whole outdoor space. Many British gardens benefit from both, each used where it performs best.
A common approach is to use weathered bronze for the fixed, practical lighting: wall lanterns at the front and back doors, a post light at the gate, perhaps pedestal lights along a path. Rattan effect is then reserved for the relaxed zones: a lantern on the coffee table, a cluster of solar globes beside the sofa, a pendant under the pergola.
This creates a natural hierarchy. The architectural lighting frames the house, while the softer lighting brings warmth to the places where you sit and unwind. The two finishes share an earthy, natural palette, so they sit together comfortably.
Lighting always looks best when it relates to the furniture around it. Rattan effect lights are an obvious companion to rattan effect sofas and corner sets. A matching weave on the lantern and the seating creates a cohesive outdoor room. Our rattan effect garden seating sets UK range includes designs in natural, grey and brown tones that suit both finishes.
Weathered bronze sits well beside metal and timber furniture: cast aluminium bistro sets, teak benches and wrought iron chairs. If your garden leans towards classic rather than casual, bronze lighting reinforces that character. Our modern garden armchairs UK collection includes metal and woven options that work with either approach.
Britain’s weather varies widely. A sheltered courtyard in the south east is a very different environment from an exposed coastal garden in Cornwall or a hillside plot in the Pennines. If your garden faces strong wind, salt air or prolonged damp, weathered bronze powder coat on aluminium is usually the more forgiving choice. Rattan effect can still work, but plan for shelter and seasonal storage.
Solar powered fittings in either finish also depend on daylight. Our article on how solar outdoor lights cope with UK winters is useful reading if you are considering cable free options for darker months.
If you want a single answer: choose weathered bronze for anything fixed to the house or left out all year, and choose rattan effect for portable, decorative lighting in seating areas. If your style is strongly relaxed and coastal, lean towards rattan effect. If your home is period or formal, lean towards bronze.
Most importantly, choose a finish you enjoy looking at in daylight as well as after dark. Outdoor lights are on show for every hour of the day, not just when they are switched on.
You can browse outdoor lighting, garden seating and modern furniture for the whole home at Furniture in Fashion, with free delivery to most UK mainland postcodes.
Many are designed to be weather resistant, but they last longer and look better if sheltered or brought indoors during prolonged wet and cold weather.
Powder coated aluminium does not rust. Powder coated steel can rust if the coating is damaged, so touch up any chips promptly.
Yes. Both have warm, earthy tones. Using bronze for fixed fittings and rattan effect for portable lights creates a balanced, layered scheme.
Weathered bronze is usually the better choice for a front door. It gives more directed light, copes well with exposure and suits most architectural styles.
For step lights in a pergola, a warm white of around 2700K to 3000K is…
Styling outdoor lights in a modern rustic home is about pairing simple, dark metal fittings…
Interior designers place cordless outdoor lamps in a front garden in the same way they…
Security lights can work on a contemporary pergola when they are treated as one layer…
To choose porch lights for a front door, start with the type of porch you…
PIR sensor lights and garden spike lights are both common in UK gardens, yet they…
This website uses cookies.