Categories: TV Stands

How to Measure Your Room for a Rustic TV Stand in 12 Easy Steps

To measure your room for a rustic TV stand, record the wall width, skirting depth, socket and aerial positions, your television's base and screen size, the seated eye height from your sofa and the viewing distance, then check walkways, doors and access routes into the house. The twelve steps below walk through each measurement in order, so the stand you choose fits the wall, the screen and the way you actually use the room.

Rustic TV stands are usually made from reclaimed style timber, solid pine or chunky oak, which makes them heavier and deeper than many modern designs. That substance is part of their appeal, but it also means small measuring mistakes are harder to fix. Before you browse our rustic wooden TV stands UK range, grab a tape measure, a notepad and some masking tape. Our full TV stands and units UK section is useful to have open too, since you can compare dimensions across styles as you go.

Before You Start

Measure in centimetres and write everything down. Take each measurement twice, since walls in older homes are rarely completely straight. If possible, ask someone to hold the other end of the tape for longer runs.

Step 1: Measure the Full Wall Width

Measure the wall where the stand will go from corner to corner, or from corner to the nearest door frame. This is the absolute maximum, though the stand will usually be much narrower.

Step 2: Note Any Obstructions

Mark the position of radiators, window reveals, light switches and door frames. Rustic stands tend to be solid and deep, so an obstruction that seems minor can stop a piece sitting flush.

Step 3: Check the Skirting Board

Measure how far the skirting projects from the wall and how tall it is. Solid timber stands with full backs will sit away from the wall by the depth of the skirting, which adds to how far they project into the room.

Step 4: Locate Sockets and the Aerial Point

Measure the height and horizontal position of every socket and aerial point on the wall. Rustic stands often have fewer cable openings than modern designs, so knowing where power is will help you decide whether you need to drill a discreet hole or choose an open backed style.

Step 5: Measure Your Television's Base

Measure the width and depth of the television's feet or pedestal, not just the screen. Some screens use feet at the outer edges, which means the stand must be at least as wide as that span. The stand should be comfortably wider than the television overall for stability and balance.

Step 6: Check the Screen Height

Measure from the bottom of the stand or feet to the top of the screen. Combined with the stand height, this tells you how tall the whole arrangement will be, which matters if you have artwork, shelving or a low window above.

Step 7: Find Your Seated Eye Height

Sit on your usual sofa and have someone measure from the floor to your eye level. A comfortable arrangement places the centre of the screen close to this height. Rustic stands vary a lot in height, from low benches to cabinet style pieces, so this measurement narrows your choice quickly.

Step 8: Measure the Viewing Distance

Measure from the front of the sofa to the wall where the stand will sit, then subtract the stand's likely depth. The result is your actual viewing distance. Larger screens generally need more distance for comfortable viewing, so make sure the space suits your television.

Step 9: Plan the Walkway

Check the gap between the front of the proposed stand and the nearest furniture, usually the coffee table or sofa. People should be able to walk past without turning sideways. Deep rustic stands can eat into walkways more than expected, particularly in narrow terraced living rooms.

Step 10: Check Door and Drawer Clearance

Rustic stands often have hinged cupboard doors or deep drawers. Make sure there is space in front of the stand to open them fully, and that they will not collide with a rug edge, radiator or piece of furniture.

Step 11: Measure the Route Into the Room

This step is often forgotten. Measure the front door, hallway width, any tight turns and the living room door. Solid rustic pieces can be heavy and may arrive assembled, so check that the stand's largest dimensions will fit along the route. In flats, check lift dimensions and stair turns too.

Step 12: Mark the Footprint

Once you have a likely size in mind, use masking tape to outline the stand's width and depth on the floor. Leave it for a day and walk around it. Sit on the sofa, open the room door and check that the stand feels balanced on the wall. This simple test often reveals issues that numbers alone miss.

Common Measuring Mistakes

Even careful measurers can slip up. These are the errors that most often lead to a stand that does not quite fit.

Measuring the screen, not the base

A television described by its diagonal size tells you little about its footprint. Always measure the feet or pedestal, since that is what actually sits on the stand.

Forgetting the plugs

Devices need space behind them for plugs and cables, which often stick out further than expected. If a stand is only just deep enough for a device, the cables may push it forward or prevent the stand sitting against the wall.

Ignoring rustic irregularities

Reclaimed style timber can vary slightly in thickness, and some rustic stands have chunky legs or overhanging tops. Check whether listed dimensions include those details, particularly the widest point of the top.

Overlooking the floor

Older homes often have uneven floorboards. A heavy stand on an uneven floor may rock or lean. Check the floor with a spirit level and, if needed, plan to use adjustable feet or discreet wedges.

Measuring once

Walls, alcoves and doorways in period properties can vary by a surprising amount from top to bottom. Measure at floor level, halfway up and at the height of the stand's top, then use the smallest figure.

Forgetting future changes

If you plan to upgrade to a larger television, add a soundbar or rearrange the room, allow for it now. A little extra width or depth will save you replacing the stand sooner than you would like.

Keep all your notes together, perhaps with a quick sketch of the wall, so you can check dimensions at a glance while comparing designs.

Turning Measurements Into a Choice

With your notes in hand, you can shortlist rustic stands that fit. Look for three things: a width comfortably wider than the television, a height that suits your seated eye level and a depth that leaves a clear walkway.

Then think about the room around it. Rustic stands look their best when grounded by texture. A wool or jute rug in front of the seating area softens the heavy timber and helps define the lounge space. Our modern rugs UK sale collection includes natural textures that pair well with reclaimed wood.

If your measurements show that the main wall is too broken up, a corner may be a better option. Our corner TV stands UK range includes wooden designs that make use of awkward corners.

Measuring for Different Types of Rustic Stand

Low benches

Low benches suit rooms with low seating and wall mounted screens. Pay close attention to the viewing height, since a low bench can place a freestanding screen below comfortable eye level.

Cabinet style stands

Taller cabinets raise the screen and provide generous storage. They suit rooms with higher sofas and armchairs, but can feel bulky in compact rooms.

Open shelf stands

Open shelving on chunky timber frames keeps devices accessible and makes cable routing easy. Check the shelf height to make sure your devices fit, including space for cables at the back.

Useful Further Reading

The same principles apply to other timbers. Our guide on measuring your room for an oak TV unit in the UK covers similar steps for oak furniture. If you are considering a taller design, our article on standard UK sizes for tall TV units explains typical heights and footprints.

Careful measuring takes a little time, but it means the stand arrives, fits and feels right from the first evening. When you are ready, you can explore rustic and natural timber designs across Furniture in Fashion. Returns are available up to 30 days.

Frequently Asked Questions

How much wider than the TV should a stand be?

The stand should be comfortably wider than the television, ideally with some surface visible on each side. This improves stability and gives space for lamps or decorative objects.

What height should a rustic TV stand be?

Choose a height that places the centre of the screen near your seated eye level. Measure from the floor to your eyes while sitting on your usual sofa.

Do I need to measure the doorways?

Yes. Rustic stands are often solid and heavy, and some arrive assembled. Measure doors, hallways and stair turns before choosing.

How deep should the walkway be in front of the stand?

Leave enough space for people to walk past comfortably without turning sideways, and make sure cupboard doors and drawers can open fully.

fifblogadmin

Share
Published by
fifblogadmin

Recent Posts

Matching Wooden TV Stands With Coffee Tables: A Styling Guide

The TV stand and the coffee table are usually the two largest wooden surfaces in…

16 minutes ago

Where to Position Your Wooden TV Stand in a Long Narrow Living Room

Long, narrow living rooms are common in British terraces, converted flats and many new builds,…

16 minutes ago

How to Get Designer Wood and Metal TV Stand Style for Less

Designer wood and metal TV stands share a few recognisable qualities: slim, precise metalwork, warm…

21 minutes ago

How to Get Designer Wooden TV Stand with Doors Style for Less

You can get designer wooden TV stand with doors style for less by focusing on…

31 minutes ago

Should You Buy a Pine TV Stand or a Slatted Wood TV Stand? A Side-by-Side Guide

Pine and slatted wood TV stands appeal to different tastes, and the choice often comes…

31 minutes ago

Investment Rustic TV Stands: Pieces You’ll Love for Decades

A rustic TV stand becomes a true investment when it is built from solid timber,…

41 minutes ago

This website uses cookies.