On a bungalow, outdoor wall lights should be compact, evenly spaced and mounted with the low eaves in mind. Because a single storey elevation is shorter and wider than a typical house, the lights do more to shape how the building looks after dark. Choose downward facing or up and down fittings that wash the wall gently, place one beside each external door, then repeat the same fitting at regular intervals along the front and back. Warm white bulbs and a consistent finish will make the bungalow look settled and welcoming rather than spotlit.
Bungalows are often underrated architecturally, but their long, low lines respond beautifully to good lighting. Our modern wall lights UK include designs that suit both period and contemporary single storey homes, and our full lighting collection UK makes it easy to plan the inside and outside together.
The defining feature of most bungalows is the roofline. Eaves sit much lower than on a two storey house, often only a little above the top of the windows and doors. That leaves a relatively narrow band of wall in which to mount a light.
This has two consequences. First, fittings need to be smaller and lower profile than you might choose for a taller house. A large lantern can look oversized against a short wall and may sit awkwardly close to the soffit. Second, any light that shines upward will hit the underside of the eaves very quickly. Up and down lights can look lovely, but on a low wall the upward beam may only travel a short distance before meeting the soffit, so choose a design with a gentle upward glow rather than a strong beam.
Downward facing fittings are often the safest choice. They light the path and the ground immediately in front of the house, which is usually where you need it.
Simple fittings that direct light toward the ground. They are discreet and practical, well suited to doorways and paths, and they keep light out of neighbours’ windows.
Slim cylinders or boxes that throw light in both directions, creating two soft beams on the wall. On a bungalow with render or painted brick, they can add a pleasing rhythm along the facade.
Traditional four sided or round lanterns suit older bungalows, particularly those from the interwar years with bay windows and tiled porches. Keep the size modest.
Compact, robust fittings that suit side passages, garages and back doors. They work well where space beneath the eaves is especially tight.
Many of these designs are also listed within our modern outdoor lighting UK range, which also includes path and garden lights to complete the scheme.
On a two storey house, wall lights are often mounted well above door height. On a bungalow, there may not be room. A common approach is to position the light so its centre sits roughly level with the top of the door frame, or slightly above, while leaving a clear gap below the soffit.
The goal is for the light to illuminate the step and the area just outside the door without shining into people’s eyes. If the fitting is too low, it may dazzle visitors and could be knocked. If it is pushed right up under the eaves, it can look cramped and may cast awkward shadows.
It helps to hold the fitting, or a cardboard cutout of it, against the wall and view it from the path before deciding. A few centimetres can make a noticeable difference on a low elevation.
Bungalows are usually wider than they are tall, and the front often runs a long way across the plot. A single light by the front door can leave the rest of the facade in darkness, which makes the building look smaller and less defined at night.
Repeating the same fitting at regular intervals gives the whole elevation a calm, ordered appearance. Let the architecture guide the spacing. Lights between windows, at the corners or either side of a bay often look natural. Aim for symmetry where the facade is symmetrical, and an even rhythm where it is not.
Avoid placing lights directly beside bedroom windows on the front elevation, as light can spill into the room. Bungalows have bedrooms on the ground floor, often facing the street or garden, so this is worth checking carefully.
The front door. The most important light. One fitting to the lock side of the door is often enough; a pair either side suits a wider entrance or porch.
The front elevation. Repeat the door fitting, or a smaller version, at intervals across the facade if you want the whole building to read clearly after dark.
The garage and driveway. A light above or beside the garage door helps with parking and unloading. A sensor light here can be useful.
The side passages. Simple bulkheads or downlighters keep the route to the garden or bins safe.
The back of the house. Lights beside patio or French doors connect the inside with the garden. If you sit outside in the evenings, a light near your seating area makes the space more usable. Our outdoor garden armchairs UK suit a sheltered spot by the back wall, where a gentle wall light can make the corner feel like an outdoor room.
Interwar bungalows. Often built with bay windows, pebbledash or red brick and tiled roofs. Traditional lanterns or simple coach lights in black or aged brass suit them well.
Postwar and 1960s bungalows. Usually plainer, with wide picture windows and low pitched roofs. Clean, geometric fittings in black, white or grey complement their straightforward lines.
Chalet bungalows. With rooms in the roof and dormer windows, these have slightly taller walls in places, which allows a little more freedom with fitting size.
Remodelled bungalows. Many have been extended and updated with render, cladding and large glazing. Slim up and down lights or minimal downlighters suit these contemporary finishes.
Bungalows are popular with people who want everything on one level, including many older homeowners. Good outdoor lighting supports that. Steps, ramps, thresholds and changes in path surface should be clearly lit. Even light, without harsh contrasts or deep shadows, is easier on the eyes and helps with judging distances.
Automatic controls are particularly helpful. Dusk sensors mean the porch light is already on when you arrive home in winter. Motion sensors on side passages light the way without anyone having to find a switch. Our guide to outdoor lighting and security for UK homeowners explores how to combine practical lighting with a sense of safety.
As with all outdoor electrical work, installation should be carried out by a qualified electrician, and some work is notifiable under the Building Regulations.
Because a bungalow spreads across a wide footprint, outdoor lights are often some distance apart: the front door on one side, the garage on another, the patio doors at the back. It is worth deciding early which lights should work together and which should be independent.
A common arrangement is to have the front door and front elevation lights on one switch or sensor, the back of the house on another, and side passages on their own motion sensors. That way, you can light the garden for an evening outside without lighting the street side of the house, and vice versa.
Bungalows usually have roof spaces that are relatively easy to reach, which can make running cables to new wall light positions simpler than in a taller house. Discuss this with your electrician before choosing final positions, as it may influence where lights can be placed neatly.
Warm white light, around 2700K to 3000K, suits most bungalows and makes brick, render and planting look inviting. Keep the brightness modest: on a low building, lights are closer to eye level and to neighbouring windows than on a taller house.
Choose one finish and use it throughout. Matt black is versatile, galvanised steel suits rural settings, and brass adds warmth to period homes. Consistency is what makes a single storey elevation look composed.
Low buildings can spread light further across gardens than people expect. Shielded, downward facing fittings keep it where it is useful. Our article on garden lighting and light pollution guidance in the UK offers helpful pointers.
You can explore our full range of home and garden furnishings at Furniture in Fashion, with free delivery to most UK mainland postcodes.
Roughly level with the top of the door frame, or slightly above, is a common starting point, while leaving a clear gap below the eaves. Test the position before fixing.
Yes, though on low walls the upward beam will meet the soffit quickly. Choose a design with a gentle upward glow.
At least one by each external door, plus evenly spaced fittings along the front and back if you want the whole building to read clearly after dark.
It depends on the era and style. Matt black is the most versatile, while brass and galvanised steel suit period and rural bungalows respectively.
For step lights in a pergola, a warm white of around 2700K to 3000K is…
Styling outdoor lights in a modern rustic home is about pairing simple, dark metal fittings…
Interior designers place cordless outdoor lamps in a front garden in the same way they…
Security lights can work on a contemporary pergola when they are treated as one layer…
To choose porch lights for a front door, start with the type of porch you…
PIR sensor lights and garden spike lights are both common in UK gardens, yet they…
This website uses cookies.