Position spotlights in a kitchen so they light the worktops, not the middle of the floor. In practice, that means running a line of fittings parallel to each counter, about 30 to 45cm out from the face of the wall units, spaced at roughly half the ceiling height apart. Start and finish each run about half a spacing in from the end of the worktop, add a separate group over an island if you have one, and keep a little clearance from tall units and doors. This layout puts light in front of you as you work, so you are never standing in your own shadow.
The traditional grid of downlights spread evenly across a kitchen ceiling looks tidy on a plan but often fails in use. You stand at the counter and your body blocks the light from behind, while the middle of the floor, where nobody works, is brightly lit. Positioning spotlights around the way a kitchen actually works fixes that. Our range of modern kitchen spotlights UK includes recessed, surface and adjustable fittings that suit this kind of task based layout.
Draw your kitchen from above, ideally to scale on squared paper or in a simple planning app. Mark:
This drawing is your guide. Lighting points should relate to the furniture, not to the walls of the room.
The most important number in kitchen spotlight positioning is how far each line sits from the wall cabinets. Place fittings too close and the light hits the tops of the cabinets, leaving the worktop in shadow. Place them too far out and the light lands behind you, creating shadow as you lean forward.
Roughly 30 to 45cm out from the face of the wall units works for most kitchens. This places the light just in front of the front edge of a standard 60cm deep worktop, so it shines down across the surface you are using. Where there are no wall units, such as along a window wall, measure from the wall itself and aim for the front half of the counter.
Once you have the line, decide how far apart the fittings should be. A useful rule of thumb is to space them at about half the ceiling height.
Then adjust for balance. Each run should look evenly spaced, with the first and last fitting about half a spacing in from the end of the worktop. If a run does not divide neatly, slightly reduce the spacing rather than leaving a gap at one end.
An island is lit separately from the perimeter runs. You have two main options.
A line of spotlights centred over the island, or two lines over a wide island, gives even task light. Keep the spacing consistent with the perimeter so the ceiling looks coherent.
Many people prefer pendants over the island as a focal point. In that case, skip spotlights directly above it and let the pendants do the job. Perimeter spotlights then light the rest of the kitchen. Our modern lighting UK collection includes pendants that work well alongside spotlights in this way.
If the island has seating, think about the people sitting there. Spotlights directly over their heads can feel uncomfortable, so shift the line slightly towards the working side of the island.
The hob and sink are the busiest spots in any kitchen. Make sure a fitting falls directly in front of each one rather than leaving them between two pools of light. If your cooker hood has built in lights, they will help over the hob, but a ceiling spotlight just in front adds useful fill.
Above the sink, especially under a window, one or two spotlights positioned slightly in front of the sink edge give clear light for washing and preparing food.
Some areas need care.
The beam angle should suit your spacing. Medium to wide beams of around 36 to 60 degrees give overlapping pools that light worktops evenly. Narrow beams of around 24 degrees leave gaps between pools on a working surface, so keep them for display shelving, artwork or a feature splashback.
Warm white of 2700 to 3000K suits kitchens that open into living or dining areas. If the kitchen is a separate room used mainly for cooking, 3500 to 4000K gives a crisper, more neutral light. Whatever you choose, keep it consistent across all fittings, and look for a colour rendering index of 90 or higher so food and finishes look natural.
Dimming is valuable even in a kitchen. Bright light while cooking, softer light while eating or relaxing, all from the same fittings.
Spotlights are excellent task lights but are not the whole picture.
Put each layer on its own circuit if possible. If you are updating several fittings at once, our lighting UK sale selection is a helpful place to compare styles.
Bar stools at an island or peninsula change how people experience the light. Seated guests look up and across, so glare control becomes more important. Choose fittings with recessed lamps or baffles, and confirm the seating position before fixing the lighting. Our modern bar stools UK sale come in counter and bar heights, which also affects how close guests sit to any pendants.
Joists will dictate exact positions, so expect to shift fittings by a few centimetres. Keep the line straight and the spacing even rather than chasing exact symmetry with the room. Where there is a room above, fire rated recessed fittings are commonly used. Kitchen electrical work should be carried out by a qualified electrician, who can confirm positions, circuits and compatible dimmers.
Ceiling height plays a big role in spacing, so it is worth understanding what is typical for your home. Our guide to ceiling heights in UK homes and how they affect lighting explains the differences between period and modern properties.
In a narrow galley kitchen, two parallel runs of worktop face each other across a walkway. It can be tempting to run a single line of spotlights down the middle, but that places light behind you whichever side you are working on. Two lines, one over each worktop, give far better results, even if the fittings need to be slightly smaller to avoid crowding the ceiling.
In very small kitchens with a single run of units, three or four well placed fittings along the worktop, combined with under cabinet lighting, are often enough. Choose white fittings on a white ceiling to keep the room feeling open, and avoid adding spotlights simply to fill space.
A kitchen lit this way feels brighter where it matters and calmer everywhere else. For lighting, bar stools and dining furniture to complete the room, browse our collections at Furniture in Fashion.
Roughly half the ceiling height. On a typical 2.4m ceiling, that means about 1.2m between fittings, adjusted so each run looks evenly balanced.
About 30 to 45cm out from the face of the wall units. This places light over the front of the worktop rather than behind you.
A grid often lights the floor more than the worktops. Lines following the counters and island give more useful light with fewer fittings.
It depends on the length of your worktops and island. Measure each run, divide by your chosen spacing and add a fitting at each end, half a spacing in.
Gunmetal spotlights give a home office a calm, ordered look, with a dark metallic grey…
A snug is defined by intimacy, and the quickest way to lose that feeling is…
Twin spotlights suit a quiet luxury garden room because they give you two directions of…
A maximalist room is full of colour, pattern, art and treasured objects, and without careful…
A cinema room is unusual because its lighting spends most of its life switched off.…
The light you need in a home office changes throughout the day. Bright, focused light…
This website uses cookies.