To light trees and shrubs in your garden, place a small number of directional lights at the base of each plant and angle them to show off its shape: uplighting for trees with open canopies, grazing light across textured bark and washing light over dense shrubs. Use warm white, keep fittings low and hidden among the planting, and light only the plants worth looking at. The goal is to give the garden depth and structure after dark, not to make it bright.
Before deciding on fittings, look through our modern outdoor lighting UK collection to compare spike lights, ground recessed uplighters and tree mounted downlights. This guide explains the main techniques, how to match them to different plants, which fittings to use and how to plan a scheme that works through every season.
Trees and shrubs are the permanent structure of a garden. They hold their shape through the year, and many look as striking in winter as in summer. Lighting them extends the garden into the evening, gives you a view from the house after dark and creates a sense of depth that a lit patio alone cannot achieve.
Well lit trees also change how the garden feels. A softly uplit canopy at the end of the lawn draws the eye outward and makes the space feel larger. A lit shrub border gives the patio a backdrop. Even in a small garden, one carefully lit tree can transform the view from the kitchen window. If you are planning indoor and outdoor lighting together, our modern lighting UK sale collections make it easier to keep finishes and colour temperatures consistent.
Uplighting means placing a light at ground level and pointing it up into the plant. It is the most common technique for trees, revealing the trunk, branches and underside of the canopy. A narrow beam emphasises height, while a wider beam spreads light across a broad crown.
Grazing places the light very close to the trunk or surface and angles it steeply upward, so the beam skims across the texture. This suits trees with interesting bark, such as silver birch, paperbark maple or Scots pine.
Washing uses a wide beam placed a little further away to spread light evenly across a surface. It works well on dense shrubs, hedges and evergreen screens, where you want the whole plant to glow softly.
Silhouetting lights the wall or fence behind a plant rather than the plant itself, so the shape stands out in dark outline. This works beautifully with plants that have a strong, sculptural form, such as Japanese maples, cloud pruned shrubs or architectural grasses.
Shadowing places a light in front of a plant so its shadow is cast onto a wall behind. A lacy tree or a shrub with fine foliage creates a moving pattern when the wind blows.
Moonlighting means mounting a downlight high in a mature tree so it shines down through the branches, creating dappled light on the ground below, much like moonlight. It suits larger trees and needs careful installation, ideally by a professional.
Japanese maples, crab apples, ornamental cherries and magnolias usually need just one uplight placed at the base, slightly in front of the trunk. For a maple with fine leaves, try silhouetting against a pale wall for a more delicate effect.
Multi stem birch, amelanchier and cornus look striking with two uplights placed at different angles, so each stem catches the light. This avoids flat, one sided lighting.
Oaks, beeches and limes need two or three wider beam lights placed around the trunk to light the full canopy. Consider moonlighting if the tree overhangs a seating area.
Box balls, pittosporum, holly and yew suit washing with a wide beam, which reveals their dense form evenly. Clipped topiary looks sharp when uplit from close to the base.
Hydrangeas, roses and viburnums are seasonal. Use movable spike lights so you can highlight them while they are in flower and redirect the light to other plants later in the year.
Tall grasses such as miscanthus and calamagrostis catch light beautifully, particularly when backlit. Place a light behind the clump so the seed heads glow, especially in autumn and winter.
The most flexible option. They push into soil and can be moved as plants grow. Choose adjustable heads so you can fine tune the angle.
Set flush into paving, decking or lawn, these are almost invisible by day. They suit trees growing in hard landscaping, but they are permanent and harder to adjust.
Fixed high in a tree using adjustable straps rather than nails or screws, which can damage the tree. These are used for moonlighting and should be checked regularly as the tree grows.
Compact spotlights mounted on walls or fences can be used for silhouetting and shadowing. Our modern spotlights UK range includes adjustable designs, though always check that any fitting used outdoors carries a suitable IP rating.
Beam angle has more influence on the result than brightness. Narrow beams of around 10 to 25 degrees suit tall, slender trees and individual trunks. Medium beams of 25 to 40 degrees suit most small and medium trees. Wide beams of 40 degrees or more suit broad canopies, shrubs and hedges.
Start lower than you think. Gentle light reveals more texture than strong light, which can flatten foliage and cause glare. Many LED spike lights now offer adjustable output, which is useful for balancing a scheme.
Warm white light of around 2700K to 3000K suits most gardens. It flatters bark, stone and timber and creates a welcoming atmosphere. Some designers use a slightly cooler white of around 4000K on foliage to keep greens fresh, but mixing colour temperatures in the same view should be done with care. For most homes, keeping everything warm and consistent is the safer choice.
Begin by standing at the windows you use most in the evening, such as the kitchen, living room or garden room. Note which trees and shrubs you can see. These are the plants to prioritise, as you will enjoy the lighting most from indoors through the colder months.
Next, think about where you sit outside. Lighting the plants around a seating area creates a sense of enclosure and gives the space a backdrop. Our outdoor garden seating sets UK range includes designs that sit comfortably within a planted, softly lit garden.
Finally, test at dusk. Use a torch or a temporary spike light to try different positions and angles before fixing anything permanently. Small changes in position make a large difference to the effect.
Keep the overall balance in mind as well. A single brightly lit tree surrounded by darkness can look dramatic but isolated. Adding gentle light to one or two shrubs nearby, or to the edge of a border, links the feature back to the rest of the garden and helps the eye travel naturally across the space.
Light that spills over fences, into bedroom windows or up into the night sky can cause friction with neighbours and affect wildlife. Point lights into plants rather than across boundaries, use shields or hoods to control the beam and set timers so the garden returns to darkness later in the evening. Our article on garden lighting and light pollution guidance for UK homes covers this in more depth.
If you prefer to avoid wiring, solar spike lights are an option for accent lighting, though they perform less consistently in winter. Our guide to solar garden light performance in a UK winter explains what to expect.
Mains powered garden lighting should be installed by a qualified electrician, with cables protected from spades and mowers. Low voltage systems are simpler and safer for DIY installation in many cases. Check fittings each spring and autumn: clean lenses, adjust angles as plants grow, tighten straps on tree mounted lights and trim back foliage that blocks beams.
A garden with lit trees and shrubs has a quiet, layered beauty after dark that rewards the effort many times over. When you are ready to plan, explore lighting and garden furniture together at Furniture in Fashion, with free delivery to most UK mainland postcodes.
A small ornamental tree usually needs one uplight. Multi stem trees benefit from two, and large mature trees may need two or three to light the full canopy evenly.
Warm white of around 2700K to 3000K suits most gardens and flatters bark and foliage. Cooler light can be used sparingly on greenery but is best kept consistent within one view.
Use adjustable straps rather than nails or screws, which can damage the tree. Check and loosen straps regularly as the tree grows.
Usually between 30 centimetres and a metre from the trunk, angled up into the canopy. Test positions at dusk before fixing them in place.
For step lights in a pergola, a warm white of around 2700K to 3000K is…
Styling outdoor lights in a modern rustic home is about pairing simple, dark metal fittings…
Interior designers place cordless outdoor lamps in a front garden in the same way they…
Security lights can work on a contemporary pergola when they are treated as one layer…
To choose porch lights for a front door, start with the type of porch you…
PIR sensor lights and garden spike lights are both common in UK gardens, yet they…
This website uses cookies.