The simplest ways to save energy when running outdoor lanterns are to use LED light sources, choose solar or rechargeable lanterns where daylight or indoor charging allows, put mains lanterns on timers or dusk to dawn sensors, dim them where possible and only light the areas you actually use. Keeping lanterns clean, well positioned and fitted with the right brightness for their job also reduces waste. Together, these habits let you enjoy a warmly lit garden through long evenings without leaving lights burning unnecessarily.
Lanterns are some of the most characterful pieces of modern outdoor lighting UK gardens can have. They frame doors, line steps and bring a soft glow to patios. Because they are often left on for hours at a time, small changes in how they are powered and controlled make a real difference to how much energy they use.
If you still have older lanterns using halogen or traditional filament bulbs, changing to LED is the single most effective step. LEDs produce the same amount of light using a fraction of the energy and last far longer, which also means fewer replacements and less waste.
Look for LED bulbs with a warm white colour temperature, often listed around 2700K, to keep the soft, golden look that suits lanterns. Filament style LEDs, with visible strands inside clear glass, mimic traditional bulbs particularly well in glass lanterns.
Check that the bulb fits your lantern and is suitable for enclosed fittings and outdoor use. Our wider lighting UK sale range includes lanterns designed around LED light sources from the start.
Solar lanterns use daylight to charge a battery, then switch on automatically at dusk. They draw nothing from the household supply. They work best in open positions with direct sun for much of the day, and their run time naturally shortens in winter when daylight is limited.
Battery lanterns that charge by USB indoors are a flexible middle ground. They use very little energy to charge and only run when you switch them on. They suit tables, steps and seating areas where light is needed for a few hours at a time.
Wired lanterns are the most reliable choice for doorways and routes that need light every night. With LED bulbs and good controls, they can still be very efficient.
Many gardens benefit from a mix: mains lanterns by the doors, solar lanterns in sunny borders and rechargeable lanterns for the patio table.
A lantern left on all night uses far more energy than one that switches off at a sensible hour. Controls help you avoid that without having to remember every evening.
Remember to adjust timers when the clocks change in spring and autumn, so lights are not coming on in daylight.
Most outdoor lanterns are brighter than they need to be for atmosphere. Dimming reduces energy use and often improves the look of the garden, because softer light feels more natural at night.
If your lanterns are wired, ask your electrician about suitable dimmers for outdoor LED circuits. Many rechargeable lanterns have built in dimming. For solar lanterns, models with a low setting will also last longer through the evening.
It is tempting to light the whole garden, but many areas are rarely used after dark. Focus lanterns on the places that matter:
Lanterns elsewhere can be portable, brought out only when needed. This approach usually looks better as well as using less energy, because darkness between lit areas gives the garden depth.
A well placed lantern does more with less light. Lanterns beside a pale wall reflect light back into the space. Lanterns grouped together on a step or a low table create a stronger effect than the same number scattered around. Lanterns placed at seating height make a small amount of light feel generous.
A bench with a pair of lanterns either side is a classic arrangement that needs only modest output. Our occasional garden seating UK collection includes compact benches and chairs that suit this kind of quiet corner.
Energy is often wasted simply because a lantern is brighter than its position requires. A lantern beside the front door needs enough light to show the step, the lock and the face of a visitor. A lantern on a garden wall or at the end of a path is mostly decorative and can run at a much lower output.
When choosing LED bulbs, compare lumens rather than watts. For decorative lanterns, a low lumen bulb gives a gentle glow that looks closer to candlelight. For doorways, a moderate output is usually enough when the lantern has frosted or opal glass to spread the light evenly. Very bright bulbs in clear glass lanterns tend to create glare, which makes people want even more light elsewhere to compensate.
Walk around the garden after dark once your lanterns are in place. If any feel harsh, swapping to a lower output bulb or adding a dimmer is a simple fix that saves energy straight away.
Lanterns rarely work alone. Wall lights, step lights and portable lamps all contribute to how lit a garden feels. When each light has a clear role, none of them needs to work hard. A single lantern by the door, two on the steps and a rechargeable lamp on the table can make a patio feel welcoming with very little total output.
It also helps to consider the view from indoors. If you mostly see the garden through a window in winter, a couple of lanterns placed within that view will give more pleasure than several scattered in corners you never look at.
Dirt, pollen, cobwebs and condensation on lantern glass reduce the amount of light that escapes. Wiping glass clean a few times a year restores brightness and means you can often run lanterns at a lower setting.
For solar lanterns, a clean panel is especially important. A layer of grime or leaf debris can significantly reduce charging, particularly in winter when every hour of daylight counts. Clear away overhanging growth that shades the panel.
Energy saving is about more than electricity. A lantern that lasts many years uses fewer resources overall than one that needs replacing after a couple of seasons. Look for:
If you are replacing several older lanterns, our outdoor lantern and lighting sale UK selection is a useful place to compare efficient modern designs.
Long winter evenings are when lanterns run the longest. A few seasonal habits help:
Solar lanterns deserve particular attention at this time of year, as shorter days mean less charge. Our article on solar garden light performance in UK winters explains what to expect and how to get the most from them.
Using less light is also kinder to neighbours and wildlife. Lanterns with frosted or opal glass give a softer glow and less glare than clear glass with bright bulbs. Aiming light downwards and switching off at a reasonable hour helps keep the night sky dark.
At Furniture in Fashion, we offer lanterns and outdoor lighting designed with efficient LED technology and durable materials. Returns are available up to 30 days.
Yes. LEDs produce similar light using far less energy and last much longer, making them the most efficient choice for outdoor lanterns.
Decorative lanterns are best on a timer that switches them off at a sensible hour. For security, motion sensors use far less energy than lights that run all night.
They work well in sunny positions, especially from spring to autumn. In winter and in shade, they are dimmer and run for shorter periods, so they are best used decoratively.
Many can. Wired lanterns need a compatible dimmer and LED bulbs, and many rechargeable lanterns include built in dimming.
For step lights in a pergola, a warm white of around 2700K to 3000K is…
Styling outdoor lights in a modern rustic home is about pairing simple, dark metal fittings…
Interior designers place cordless outdoor lamps in a front garden in the same way they…
Security lights can work on a contemporary pergola when they are treated as one layer…
To choose porch lights for a front door, start with the type of porch you…
PIR sensor lights and garden spike lights are both common in UK gardens, yet they…
This website uses cookies.