Most bedrooms need just one linear pendant light. A single fitting, roughly half to two thirds the width of the bed and hung parallel to the headboard or across the foot of the bed, gives enough general light for an average UK double or king size bedroom. A second linear pendant is only worth considering in larger rooms, in bedrooms with a separate dressing or seating area, or where you want a pendant on each side of the bed in place of bedside lamps. In small bedrooms, one short fitting or even a different type of light may be the better answer.<\/p>\n
To see what is available in different lengths and finishes, browse our range of modern linear pendants and ceiling lights in the UK<\/a>.<\/p>\n A linear pendant is a long, horizontal fitting, usually suspended on two or more wires. Its shape echoes the long lines of a bed, a headboard and a run of wardrobes, which makes it look naturally at home in a bedroom. It also spreads light along its length, lighting more of the room evenly than a single central bulb.<\/p>\n Many linear pendants are slim and minimal, which suits calm, uncluttered bedroom schemes. Others carry a row of small shades or globes, giving a softer, more decorative feel.<\/p>\n A linear pendant is just one part of bedroom lighting, and our full range of modern lighting on sale in the UK<\/a> includes wall lights, table lamps and floor lamps that complete a restful scheme.<\/p>\n In the typical UK bedroom, which often measures around three to four metres on each side, one linear pendant is enough to provide general light. The question is less about how many and more about where and how big.<\/p>\n Size the fitting to the bed rather than the room. As a guide, a linear pendant roughly half to two thirds the width of the bed looks balanced. For a standard UK double bed of around 135 centimetres wide, that means a fitting of roughly 70 to 90 centimetres. For a king size bed of around 150 centimetres, around 80 to 100 centimetres. For a super king of around 180 centimetres, up to about 120 centimetres.<\/p>\n Measure the bed frame rather than the mattress, as headboards and upholstered frames are often noticeably wider. The frame is what the eye reads, so it is the better guide for the length of the light.<\/p>\n There are two common positions. The first is centred over the bed and parallel to the headboard, which frames the bed and gives balanced light across it. The second is towards the foot of the bed, which keeps the fitting out of your direct line of sight when lying down. Both work. The foot of the bed position is often more comfortable if the pendant is bright or the bulbs are visible.<\/p>\n Avoid hanging a linear pendant directly over the pillows. Looking straight up at a light when lying in bed is uncomfortable, and it can make the room feel less restful.<\/p>\n In a bedroom, a pendant over the bed should hang high enough that no one could stand up into it when getting out of bed, and high enough not to feel oppressive when lying down. In a room with a ceiling of around 2.4 metres, that usually means a short drop, keeping the base of the fitting at least two metres from the floor. In taller rooms, the pendant can come down a little further for a more intimate feel.<\/p>\n In a large main bedroom, perhaps with a seating area or a run of wardrobes some distance from the bed, a second linear pendant can light the second zone. Place one over or near the bed and the other over the seating area or along the wardrobe wall. Use matching or coordinated fittings so the room feels unified.<\/p>\n Where a bedroom includes a dressing table or a walk through dressing area, a separate pendant gives good, even light for getting ready. A linear fitting above a long dressing table or run of drawers lights the surface evenly from end to end.<\/p>\n Some people prefer two shorter pendants, one on each side of the bed, in place of bedside lamps. In this case, the pendants are usually small rather than linear, though a short linear bar on each side can look striking above wide bedside cabinets. Hang them so the base sits roughly 50 to 70 centimetres above the cabinet surface, and make sure each has its own switch within reach of the bed.<\/p>\n The size of the bedside surface matters here. Our range of modern bedside cabinets on sale in the UK<\/a> includes wooden, high gloss and mirrored designs, and our guide to bedside table measurements for UK bedrooms<\/a> helps you match cabinet heights to the bed and the light above. If you are still choosing the bed itself, our guide to UK king size bed dimensions and room sizes<\/a> explains how much space the frame and mattress need.<\/p>\n Bedroom lighting should help you wind down. Warm white bulbs or LEDs of around 2700K create a softer, more restful feel than cooler light. A dimmer is especially valuable in a bedroom, letting you use the pendant brightly for cleaning or getting dressed and at a low level in the evening.<\/p>\n Look for a linear pendant with a diffused or recessed light source so you do not see bright LEDs when lying down. Fittings that emit some light upwards as well as downwards can soften the overall effect by bouncing light off the ceiling.<\/p>\n However many linear pendants you choose, the ceiling light should not be the only source of light in a bedroom. Bedside lamps or wall lights give focused light for reading and a much more relaxing glow at night. A lamp on a dressing table or chest of drawers adds warmth at a lower level.<\/p>\n Plan switching carefully. Ideally, you should be able to switch off the ceiling light from the bed as well as the door, either with two way switching or a smart control.<\/p>\n Linear pendants come in brushed brass, matt black, satin nickel, wood and painted finishes. Choose one that relates to something else in the room, such as the handles on bedside cabinets, the frame of a mirror or the legs of a bed. Repeating a finish two or three times makes a bedroom feel calm and considered.<\/p>\n For minimal schemes, a slim matt or wood linear pendant blends into the ceiling. For a more decorative feel, a linear fitting with a row of small glass shades adds character without becoming fussy.<\/p>\n Guest bedrooms often double as a study, a sewing room or storage space, so the bed is not always in the same place. In that case, a linear pendant that is not tied too closely to the bed position, such as one centred in the room and running parallel to the longest wall, gives more flexibility. Choose a modest length and a diffused light so it feels comfortable whatever the room is being used for.<\/p>\n In children’s rooms, the practical considerations change. Desks, play areas and bunk beds all affect where a pendant can safely hang. With a bunk bed or a high sleeper, a suspended fitting is rarely suitable, as the top bunk brings a child much closer to the ceiling. A flush or semi flush fitting is the safer option, with a small lamp at desk height for homework and a soft night light for bedtime.<\/p>\n For teenagers, a slim linear pendant over a desk can work well, combining good task light with a grown up look that will not feel dated as they get older.<\/p>\n For most bedrooms, one linear pendant is the right number. Size it to roughly half to two thirds the width of the bed, hang it parallel to the headboard or towards the foot of the bed, use warm, dimmable light and add lamps for reading. Larger rooms, dressing areas and bedside pendants are the main reasons to consider more than one.<\/p>\nWhy Linear Pendants Work in Bedrooms<\/h3>\n
One Pendant: The Usual Answer<\/h3>\n
Sizing to the Bed<\/h3>\n
Positioning<\/h3>\n
Hanging Height<\/h3>\n
When Two Pendants Make Sense<\/h3>\n
Larger Bedrooms<\/h3>\n
Bedrooms With a Dressing Area<\/h3>\n
Bedside Pendants<\/h3>\n
When a Linear Pendant Is Not the Best Fit<\/h3>\n
\n
Light Quality for Rest<\/h3>\n
Layering With Lamps and Wall Lights<\/h3>\n
Matching Finishes and Style<\/h3>\n
Guest Rooms and Children’s Bedrooms<\/h3>\n
Summing Up<\/h3>\n