An oak TV stand will fit your room if it is 20 to 30 cm wider than your television overall, between roughly 40 and 60 cm high so the screen centre sits near seated eye level, 35 to 45 cm deep for most devices, and leaves at least 80 to 90 cm of clear walkway in front. Measure the wall, the screen and the path through the room first, and the choice of stand becomes straightforward.<\/p>\n
Oak stands come in many sizes, from compact designs for flats to long consoles for open plan rooms. Our range of oak and wooden TV stands UK<\/a> lists full dimensions for every design, and this guide explains which of those numbers matter most and how to check them against your own space. You can also compare oak with other finishes across our wider TV stands and units UK sale<\/a> collection using the same measurements.<\/p>\n Gather a steel tape measure, a notepad, a pencil and some masking tape. If possible, ask someone to help, because measuring long walls and seating heights is easier with two people. Write every measurement down in centimetres to avoid confusion when comparing product listings.<\/p>\n Screen sizes are measured diagonally in inches, which does not tell you the actual width. Look up the specification for your model and note:<\/p>\n As a rough guide, a 43 inch screen is often around 96 cm wide, a 55 inch around 123 cm, a 65 inch around 145 cm and a 75 inch around 167 cm. Always check your exact model, as bezels and designs vary.<\/p>\n Add 20 to 30 cm to the width of the television to find a comfortable minimum length for the stand. That leaves 10 to 15 cm on each side, which looks balanced and gives space for a lamp or small speaker.<\/p>\n For example, a 55 inch television suits a stand of at least 145 to 155 cm, and a 65 inch television suits one of at least 165 to 175 cm. In larger rooms, a longer stand often looks more settled, particularly if the television is wall mounted above it.<\/p>\n If your television has feet near the outer edges, make sure the top surface of the stand extends fully beneath both feet with some margin.<\/p>\n Measure the full width of the wall where the stand will go, then note anything that limits it:<\/p>\n Leave a little space at each end of the stand so it does not look squeezed. In alcoves, measure at floor level and at the height of the stand top, and use the smaller figure. If the wall is too short for a straight stand, corner TV stands UK<\/a> can make better use of the space.<\/p>\n For comfortable viewing, the centre of the screen should be close to your eye level when seated. Sit on your usual seat and measure from the floor to your eyes. On most sofas this is around 100 to 110 cm.<\/p>\n Next, find the distance from the bottom of your television to the centre of the screen, including the feet or base. Subtract that figure from your seated eye height. The result is roughly the right height for the stand top.<\/p>\n For many homes this works out at 40 to 60 cm. If the figure is lower, a low profile stand will suit you. If it is higher, a taller stand or wall mounted screen may be better. Our guide to low TV unit measurements for UK living rooms<\/a> goes into this calculation in more detail.<\/p>\n Depth affects both what fits inside the stand and how much floor space it takes. Measure the depth of your deepest device, such as a games console or soundbar, and add 5 to 10 cm for cables at the back. Then check the depth of the television base.<\/p>\n Most oak TV stands are 35 to 50 cm deep. In smaller rooms, a depth of around 40 cm is a sensible balance between storage and space. In larger rooms, a deeper stand can hold a centre speaker or larger equipment.<\/p>\n A stand that fits against the wall can still make a room feel cramped if it reduces the path through it. Aim to leave at least 80 to 90 cm of clear floor between the front of the stand and the nearest piece of furniture where people walk.<\/p>\n Check the space between the stand and the coffee table too. Around 45 cm is usually comfortable, allowing you to reach the table from the sofa while leaving room to open doors or drawers on the stand.<\/p>\n The distance from the seating to the screen affects how comfortable viewing feels. A common approach for modern high resolution screens is to sit at roughly 1 to 1.5 times the diagonal screen size. For a 55 inch screen, that is about 140 to 210 cm. This is a guide rather than a rule, and personal comfort matters most.<\/p>\n Many stands arrive flat packed, but some larger oak designs come fully or partly assembled. Measure the width and height of doorways, the turn of the staircase and any tight corners in hallways. Compare these with the dimensions of the stand or its largest box.<\/p>\nWhat You Need Before You Start<\/h3>\n
Measurement 1: The Width of Your Television<\/h3>\n
\n
Measurement 2: The Width of the Stand<\/h3>\n
Measurement 3: The Wall Space<\/h3>\n
\n
Measurement 4: The Height of the Stand<\/h3>\n
Measurement 5: The Depth of the Stand<\/h3>\n
Measurement 6: Clearance and Walkways<\/h3>\n
Measurement 7: Viewing Distance<\/h3>\n
Measurement 8: Getting It Into the Room<\/h3>\n