Recovering dining chairs in the UK typically costs between \u00a340 and \u00a3120 per chair when carried out by a professional upholsterer, with fabric supplied separately at roughly \u00a320 to \u00a360 per metre. A straightforward drop in seat pad sits at the lower end of that range, while a fully upholstered chair with a padded back, piping or buttoning sits at the upper end. If you take on the work yourself, the cost falls to the price of fabric, foam and a few basic tools, which usually lands somewhere between \u00a315 and \u00a345 per chair.<\/p>\n
Those figures shift depending on where you live, how the chair is built and which fabric you choose. A set of six simple seat pads recovered in a mid range woven fabric might come to \u00a3250 or so all in. The same six chairs in a heavy velvet with a professional finish could comfortably pass \u00a3600. Knowing which category your chairs fall into is the quickest way to work out what you are actually looking at.<\/p>\n
Upholsterers price by labour first and materials second. Labour is dictated almost entirely by how the chair is put together. A seat pad that lifts out with four screws takes minutes to strip and staple. A chair with a sprung base, a scroll back and hand stitched edges takes hours, and the price reflects that.<\/p>\n
Fabric quantity is the second factor. A single drop in seat usually needs around half a metre. A chair with an upholstered back and sides can need a metre and a half, and patterned fabric needs more again because the repeat has to be matched across each panel. That matching is real work, and it is one of the reasons plain fabrics come in cheaper.<\/p>\n
Then there is what sits underneath. Foam that has gone flat needs replacing, and a new seat pad foam typically adds \u00a38 to \u00a320 per chair. Webbing, hessian and calico may all need renewing on older frames. None of these are expensive individually, but across six chairs they add up.<\/p>\n
It helps to think in three tiers. The first is the simple drop in seat: a padded board that sits inside the chair frame and lifts straight out. Expect \u00a340 to \u00a360 per chair in labour, plus fabric. Most contemporary dining chairs fall into this group, which is good news for anyone weighing up a refresh.<\/p>\n
The second tier covers chairs with an upholstered seat and back panel, where the fabric is fixed to the frame rather than a removable pad. Labour here usually runs \u00a370 to \u00a3100 per chair because the upholsterer has to strip the old covering carefully and work around the frame.<\/p>\n
The third tier is traditional or decorative work: deep buttoning, piping, studwork, sprung seats or antique frames. This is skilled hand work and \u00a3120 upwards per chair is normal, sometimes considerably more for genuinely old pieces that need the internals rebuilt.<\/p>\n
Recovering a drop in seat pad is one of the more approachable home projects. The chair is turned over, four screws are removed, the pad comes away, the old fabric is pulled off with a staple remover, and the new fabric is stretched over and stapled from the centre of each side outwards. Corners are folded like wrapping paper and stapled flat.<\/p>\n
The tools involved are modest: a staple gun with 8mm to 10mm staples, a staple remover or flathead screwdriver, sharp fabric scissors and a screwdriver. Buying these outright costs around \u00a330 and they last for years.<\/p>\n
Where home projects tend to go wrong is fabric choice rather than technique. Dressmaking cotton looks lovely on the roll and wears through within a year on a dining chair. Upholstery weight fabric with a Martindale rub count of 25,000 or above is what you want for daily use. Anything lower is fine for an occasional bedroom chair but not for a seat that gets used every evening.<\/p>\n
Recovering is worth doing when the frame is sound. Give the chair a firm sideways push. If it holds steady and there is no creak from the joints, the bones are good and new fabric will genuinely transform it. Solid timber frames from good makers are often worth reupholstering two or three times across their life.<\/p>\n
It stops making sense when the frame itself is failing. Loose joints that keep working free, cracked legs, or a seat frame that has split are all signs that money is better spent elsewhere. Once you are paying \u00a3100 per chair to recover six chairs that were never especially well made, you are close to the cost of a set that will last considerably longer. This is where it is worth looking at what a fresh set of modern fabric dining chairs UK sale<\/a> would cost before committing to the work.<\/p>\n The same logic applies if your chairs no longer suit the room. Recovering keeps the shape you already have. If the silhouette itself feels dated, new fabric will not change that. Browsing through a range of modern dining chairs UK sale<\/a> is a sensible sanity check before you spend on upholstery.<\/p>\n Dining chairs face a specific set of problems: food, drink, repeated sitting and, in many UK homes, children. Fabric choice matters more here than on almost any other seat in the house.<\/p>\n Woven polyester blends are the sensible default. They resist abrasion, clean reasonably well and come in a broad range of neutral tones. Velvet has become popular for dining and performs better than people expect, provided it is a polyester velvet rather than cotton, because the pile is more resilient and marks brush out. Faux leather wipes clean in seconds and suits households with young children, though it can feel cool in an unheated dining room in winter.<\/p>\n Linen looks beautiful and creases immediately. It is a reasonable choice for a formal dining room used occasionally and a poor one for a kitchen table used three times a day.<\/p>\n Colour is worth thinking about practically. Mid tone greys, greens and warm taupes hide the small marks that pale fabrics show and dark fabrics highlight with dust and lint. If you want a bolder shade, seeing it against your existing table helps, especially with a stone top where the undertone can shift how a colour reads. Anyone working with a stone surface will find the pairing easier to judge alongside a range of modern marble dining tables UK<\/a>.<\/p>\n Photograph the chair from the front, side and underneath, and send all three to the upholsterer. The underside photo tells them more than the other two combined because it reveals how the seat is fixed and what has been used inside.<\/p>\n Ask whether the quote includes foam replacement, whether fabric is supplied or customer own material, and how many metres they estimate. Fabric quantity estimates vary between upholsterers and a metre either way makes a real difference to the total.<\/p>\n If you are recovering a full set, ask about a set price. Most upholsterers reduce the per chair rate for six or eight because the setup work is done once. It is a straightforward saving and it is rarely offered unless you ask.<\/p>\n New chair fabric changes a dining room more than most people anticipate, and it often exposes what else in the room is tired. A common sequence is recovering the chairs, then realising the table top has taken more damage than the seats ever did.<\/p>\n If that happens, it is worth pricing the two together rather than in sequence. A complete set frequently costs less than a table bought separately plus six chairs recovered, and it guarantees that the finishes match. Comparing your recovering quote against a full modern dining table and chairs sets UK sale<\/a> gives you a clear picture of which route makes financial sense.<\/p>\nChoosing Fabric That Earns Its Place<\/h3>\n
Getting an Accurate Quote<\/h3>\n
Recovering as Part of a Wider Update<\/h3>\n