You make storage for shoes by counting the pairs you need to house, measuring the space you can give them, then building or choosing something that matches both. The simplest homemade version is a timber frame with two or three fixed shelves, which takes an afternoon and a few planed boards. Beyond that, the options run through crates and boxes fixed to a wall, a bench with a shelf beneath, and full cupboards with doors. The approach matters less than getting the depth, the height spacing and the location right.<\/p>\n
Almost every failed shoe storage project starts with a design idea rather than a count. Empty every shoe out of the hall and line them up. Separate the pairs worn weekly from those worn occasionally, and note the largest pair in the household.<\/p>\n
That gives you three figures: how many pairs need daily access, how many can be archived, and the depth your shelves must accommodate. Adult trainers commonly need around 300mm to 330mm of depth, ankle boots a little more. Shelf spacing of 180mm suits flat shoes, while 200mm to 250mm is needed for anything bulkier.<\/p>\n
Now measure the space. Wall length, available depth after allowing for walking room, and clear height below any sill, switch or radiator. Where the numbers conflict, storage is split across two locations rather than compressed into one.<\/p>\n
A three tier open rack is the most straightforward thing to make and remains one of the most practical, because it is fully ventilated.<\/p>\n
You need two side panels, three shelves, some 44mm softwood battens, screws, wood filler and paint or oil. Cut the sides to your total height, mark level shelf positions on the inside faces, fix a batten at each mark, then drop the shelves on and screw down through the surface into the battens. Countersink every screw so the heads sit below the timber, fill, sand and finish.<\/p>\n
Two details make the difference. Add a back rail or a diagonal brace to stop the frame racking sideways, and keep the lowest shelf 40mm to 60mm clear of the floor so you can clean underneath. If the rack is over a metre wide, add a central upright to prevent shelves sagging under boots.<\/p>\n
If you would rather not build, the same open format is available ready made across our modern shoe racks and bench UK<\/a> range, usually with better shelf spacing than a first attempt at joinery.<\/p>\n Adding a seat is the single most useful upgrade. Build the rack at 450mm high instead of 800mm, fit a thicker top of 25mm timber or two layers of 18mm board glued together, then either leave it bare or fit a simple upholstered pad.<\/p>\n For a pad, cut a piece of 12mm plywood to the top size, add 40mm foam, wrap in wadding and fabric, and staple underneath. It takes about an hour and transforms a functional rack into a piece of hallway furniture.<\/p>\n Strengthen the frame if it will be sat on. Corner blocks at each joint, screwed rather than nailed, are enough for normal household use. A bench that flexes when you sit on it will eventually loosen at every joint.<\/p>\n Where floor space is genuinely unavailable, take the storage off the ground. Two robust brackets and a 300mm deep board make a floating shoe shelf that leaves the floor clear for cleaning, which matters in a hallway.<\/p>\n Fix into studs where possible, or use appropriate heavy duty fixings in masonry. Keep the load sensible: a wall shelf is right for shoes and wrong for a season’s worth of boots.<\/p>\n Angled wall pockets are another option, made from a sloping board and a front lip, which holds shoes on a tilt in less depth. This is the same principle used in slim tilting cabinets, and it recovers around 60mm compared with flat shelving.<\/p>\n The best shoe storage often goes where nothing else can. Under a stair run, in the recess beside a chimney breast, in the strip behind an inward opening front door, or in the base of a wardrobe.<\/p>\n For an understair void, build a simple battened frame and cut side panels to the stair angle using a card template held against the stringer. For an alcove, measure the width at three heights, because old walls are rarely parallel, and work to the smallest figure.<\/p>\n Inside a bedroom, the base of a wardrobe or a slim unit beside it keeps good footwear away from a damp hallway. Our modern clothes storage UK<\/a> range covers the wardrobe side of that arrangement.<\/p>\n Open racks are ventilated, cheap and quick. Closed cupboards hide clutter, keep dust off and look considerably calmer in an entrance that visitors see immediately.<\/p>\n Building doors is where a homemade project becomes noticeably harder, because a door needs a square frame, consistent gaps and hinges set accurately. If you want closed storage without that work, buying is the sensible route, and our shoe storage cabinets UK sale<\/a> range covers slim, tall and bench formats. Where a hallway needs a coordinated result rather than a single piece, the hallway storage furniture UK<\/a> collection groups matching items, and the wider ranges at Furniture in Fashion<\/a> extend the same finishes through the rest of the house.<\/p>\n Storage only succeeds if the system suits the household. Give each person a designated tier, which removes arguments and stops shoes migrating across shelves. Put the pairs worn daily at the most reachable height, between knee and chest level.<\/p>\n Keep one bay or tray for wet footwear, ideally near the door and away from anything absorbent. Wet shoes put into closed storage are the reason cabinets develop odour.<\/p>\n Review it twice a year. Swapping summer and winter footwear between the accessible tiers and the archive space keeps a modest unit functioning like a much larger one. Add a small box or basket for polish, brushes and laces so maintenance items stay with the shoes rather than scattering through the house.<\/p>\n A three tier open rack with battened shelves. It needs only straight cuts, a drill and a spirit level, and it can be built in an afternoon.<\/p>\n Around 300mm to 330mm for adult trainers stored flat. Angling the shelves slightly saves 40mm to 60mm if depth is restricted.<\/p>\n About 180mm for flat shoes, 200mm for trainers and 250mm or more for ankle boots. Include at least one taller bay if you own boots.<\/p>\n Eighteen millimetre birch plywood or MDF for shelves, with softwood battens for support. Plywood copes better with occasional damp in a hallway.<\/p>\n Yes. A primer plus two coats of eggshell or satin makes the surface wipeable and protects the board edges, which are the first areas to absorb moisture.<\/p>\n","protected":false},"excerpt":{"rendered":" Making storage for shoes starts with counting pairs and measuring space rather than choosing a design, and this guide follows that order. We begin with the three figures that determine everything: how many pairs need daily access, how many can be archived and the depth…<\/p>\n","protected":false},"author":4,"featured_media":59350,"comment_status":"","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[3334],"tags":[5680,2522,5254,184],"class_list":["post-59349","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-how-to-guide-for-your-home","tag-diy-storage","tag-hallway-ideas","tag-home-projects","tag-shoe-storage"],"acf":[],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/posts\/59349","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/comments?post=59349"}],"version-history":[{"count":0,"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/posts\/59349\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/media\/59350"}],"wp:attachment":[{"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/media?parent=59349"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/categories?post=59349"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.furnitureinfashion.net\/blog\/wp-json\/wp\/v2\/tags?post=59349"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}Turning a Rack Into a Bench<\/h3>\n
Wall Mounted and Floating Options<\/h3>\n
Making Use of Awkward Spaces<\/h3>\n
Closed Storage and When It Is Worth It<\/h3>\n
Keeping It Working Once It Is Built<\/h3>\n
Frequently Asked Questions<\/h3>\n
What is the easiest shoe storage to make?<\/h3>\n
What depth should homemade shelves be?<\/h3>\n
How far apart should the shelves be?<\/h3>\n
What material is best for a homemade rack?<\/h3>\n
Should homemade shoe storage be painted?<\/h3>\n