How to Measure up Before Buying Bedside Tables with Shelves

Before buying a bedside table with shelves, measure five things: the height of your mattress top, the floor space between the bed and the nearest wall or obstacle, the clearance you need to walk past, the height of the items you want to store on each shelf, and the space above the table for a lamp or wall fitting. With those figures in hand, you can check any design against your room in seconds and avoid the most common mistakes, such as a table that sits too high, shelves too shallow for your books, or a footprint that blocks a door.

Shelved bedside tables are a sensible choice for many British bedrooms. They are lighter in appearance than fully enclosed cabinets and make it easy to see and reach what you need. Our bedside tables UK sale include open shelf, mixed drawer and shelf, and tiered designs. Here is a step by step approach to measuring before you choose.

What You Will Need

A retractable steel tape measure is the most useful tool, as it stays rigid over short distances and is easy to read. Have a notepad or your phone ready to jot down figures, and if possible ask someone to help hold the tape across wider spaces. Masking tape is handy for marking the outline of a table on the floor once you have a shortlist.

Step 1: Measure Your Mattress Height

This is the single most important figure. Measure from the floor to the top surface of your mattress, including any topper. Most people find a bedside table comfortable when its top is level with the mattress or up to around 5 cm higher.

Mattress heights vary widely. Divan beds with deep mattresses can sit noticeably higher than low platform frames. If you are buying a new bed at the same time, use its listed height plus your mattress depth. Our modern bedroom furniture UK listings give dimensions for each piece, which helps you match bed and bedside before anything arrives.

Step 2: Measure the Floor Width Available

Measure the gap between the side of the bed frame and the nearest wall, wardrobe, radiator or window. This is the maximum width your table can be. Allow a few centimetres either side so the table does not rub against the bed or wall, and so you can clean around it.

Remember that bed frames are often wider than the mattress. Measure from the frame edge, not the mattress, and check whether the headboard extends beyond the frame, as some do.

Step 3: Check Walking Clearance

A bedside table should not interrupt the route to the bed, the door or a wardrobe. Measure the distance from where the front edge of the table will sit to the nearest obstacle in front of it. Aim to leave enough space to walk past comfortably, which for most people means at least 60 cm and ideally more.

Check door swings too. Bedroom doors, wardrobe doors and en suite doors all need room to open fully. Mark their arc on the floor with masking tape if you are unsure.

Step 4: Decide on Depth

Depth is the distance from the front of the table to the back. Standard bedside tables are often between 35 and 45 cm deep. In a narrow room, a shallower table of around 30 to 35 cm keeps the walkway clear. In a larger room, a deeper design gives more shelf space.

With open shelves, depth determines what you can store. A paperback stands upright comfortably on a shelf about 20 cm deep, but a hardback or a basket may need more.

Step 5: Measure What Goes on Each Shelf

This step is often skipped, and it is the reason many shelved bedside tables end up looking cluttered. Gather the things you plan to store and measure them.

  • Books: check the height of your tallest regular read. Hardbacks often need more clearance than paperbacks.
  • Baskets or boxes: if you plan to hide smaller items in a basket, measure the basket and check it fits the shelf height and depth.
  • Glasses case, tissues and chargers: small items are easier to manage in a tray or box on the shelf.
  • Water bottle or carafe: if you keep water on a lower shelf, check its height.

Then compare these heights with the gap between shelves on the tables you are considering. Leave a little extra so items slide in and out easily.

Step 6: Consider the Space Above

A bedside table rarely stands alone. Most people add a lamp, and some fix shelves, wall lights or artwork above. Measure the height from the floor to any window sill, picture or wall light near the bed.

If you plan to use a table lamp, add its height to the table height and check it sits comfortably below any wall fitting or sloping ceiling. A lamp shade with its lower edge near eye level when you sit up in bed gives the most comfortable reading light. Our table lamps UK sale list heights and base sizes, which helps you check fit on a smaller top.

Step 7: Account for Skirting and Sockets

Skirting boards push furniture slightly away from the wall. If your table has a solid back that sits flush with the floor, measure the depth of your skirting and add it to the space needed. Open backed shelved tables are more forgiving here.

Check where your sockets are too. A shelved table with an open back makes it easy to run a lamp or charger cable down from the top. Make sure the table does not block the socket entirely, or that you can still reach it when needed.

Step 8: Mark It Out on the Floor

Once you have a shortlist, use masking tape to mark the footprint of each option on the floor beside the bed. Leave it for a day and walk around it. This simple test reveals whether a table feels too large, blocks a door or leaves the space looking empty.

You can also stack books or boxes to the height of the table to check how it sits next to the mattress.

Common Measuring Mistakes to Avoid

Measuring the Mattress Instead of the Frame

Measuring width from the mattress edge rather than the bed frame can leave you with a table that will not fit.

Forgetting the Topper

A mattress topper can add several centimetres. Include it in your height measurement.

Ignoring Shelf Spacing

A table may have the right overall size but shelves too close together for your books. Always check the internal spacing.

Overlooking Visual Weight

A table can technically fit but still feel too big. Open shelves feel lighter than solid cabinets, so a shelved design can often be slightly larger without overwhelming the room.

Matching Table Size to Bed Size

As a rough guide, larger beds can carry wider bedside tables. A single bed might pair with a table of 30 to 40 cm wide, a double with 40 to 50 cm, and a king or super king with 50 cm or more. These are starting points rather than rules: the room itself has the final say.

If you are still choosing a bed, our modern beds UK range lists full frame dimensions. Our guide to UK king size bed dimensions is useful for checking how much floor a larger bed will take, and our article on bedside table measurements for UK bedrooms offers a quick reference for standard sizes.

Keeping Open Shelves Tidy

Open shelves look best when they are not overloaded. Limit each shelf to a few items and group small things in a tray or basket. Books look neater when stacked horizontally on a lower shelf or stood upright with a bookend. Rotate what you keep there so the shelves hold only what you actually use at night.

You can explore our full range of bedroom furniture at Furniture in Fashion, where each product listing includes dimensions to help you measure with confidence. Returns are available up to 30 days.

Frequently Asked Questions

How high should a bedside table with shelves be?

Aim for the top to be level with your mattress or up to around 5 cm above it. Measure from the floor to the top of the mattress, including any topper.

How much space should I leave around a bedside table?

Leave a few centimetres between the table and the bed and wall, and at least 60 cm of walking space in front where possible.

What shelf height do I need for books?

Measure your tallest regular book and add a little extra so it slides in easily. Hardbacks usually need more clearance than paperbacks.

Are open shelf bedside tables good for small rooms?

Yes. Open shelves feel lighter than enclosed cabinets, so they suit compact bedrooms, provided you keep them tidy.

Should I measure the mattress or the bed frame for width?

Measure from the bed frame, since frames are often wider than mattresses. Check the headboard too, as some extend beyond the frame.

fifblogadmin

Share
Published by
fifblogadmin

Recent Posts

Walnut Bedside Cabinets for a Boho Main Bedroom: Styling Ideas That Work

Boho bedrooms are relaxed, personal and full of layered colour, pattern and texture, but without…

6 hours ago

Marble vs Painted Wood Bedside Cabinets: Style and Practicality Compared

Choosing between a marble and a painted wood bedside cabinet comes down to how you…

7 hours ago

Styling Low Bedside Cabinets in a 1930s Semi Guest Bedroom

The 1930s semi is one of Britain's most familiar homes, and its guest bedroom is…

8 hours ago

How to Create a Luxe Glam Guest Suite with Wall-Mounted Bedside Cabinets

A guest suite is a chance to offer visitors something special, and a luxe glam…

8 hours ago

Velvet vs Mango Wood Bedside Cabinets: Style and Practicality Compared

Velvet and mango wood bedside cabinets bring very different qualities to a bedroom. Velvet offers…

9 hours ago

Styling Two-Drawer Bedside Cabinets Alongside a Dressing Table in a Guest Bedroom

Two drawer bedside cabinets sit comfortably alongside a dressing table in a guest bedroom when…

9 hours ago

This website uses cookies.