No, a queen bed is larger than a double. A UK double measures 135cm by 190cm, while a queen size sits at roughly 150cm by 200cm, giving you around 15cm more width and 10cm more length. The reason the question comes up so often is that queen is not a native British bed size, so the labelling can be inconsistent.
In the United Kingdom, the size that occupies the position queen holds elsewhere is called king size. When a UK retailer lists a queen bed, it is almost always describing a 150cm wide mattress, the same width as a British king size.
British bed sizing runs single, small double, double, king size, super king size. Queen does not appear in that sequence. The term arrived through imported furniture, international hotel standards and online listings written for a global audience.
Elsewhere, queen describes a bed around 152cm wide, which is close enough to the UK king size at 150cm that the two are often treated as equivalent. The practical consequence is that a bed sold as queen in Britain will usually take UK king size bedding, but you should confirm the centimetre figures before buying sheets.
The risk is mixing systems. A mattress made to a 152cm standard placed in a frame built for 150cm will be a tight squeeze, and 2cm across a mattress edge is enough to cause bunching. Match frame and mattress by measurement, not by name.
Set the numbers next to each other and the difference becomes clear. A double gives each of two sleepers 67.5cm of width. A queen or UK king gives each person 75cm. That extra 7.5cm per person sounds modest but represents around an eleventh more personal space, which is noticeable for anyone who shares with a restless partner.
Length is the other gain. A double is 190cm and a queen is 200cm. For sleepers over about 185cm tall, that additional 10cm is often the deciding factor regardless of width.
Floor space is where the trade off appears. The larger bed occupies roughly 0.3 square metres more floor area, and because it is wider, it eats into the walkways on both sides rather than just one. In a room that is already close to its limit, that can be the difference between a comfortable circulation route and a room you have to edge around.
Typical British main bedrooms range from around 3m by 3.4m to 3.5m by 4m. In the smaller of those, a double leaves comfortable clearance on both sides while a queen or king reduces it to the bare minimum. In the larger, a queen sits well and still allows for wardrobes and a chest of drawers.
Measure before deciding. Mark out the footprint on the floor with tape, including the frame rather than just the mattress, then walk the route you would take to the window, the wardrobe and the door. If you find yourself turning sideways, the bed is too big for the room whatever the specification says.
Second bedrooms and guest rooms are usually better served by a double. It accepts a couple staying over, takes widely available bedding and leaves floor space for a wardrobe that can actually open. Looking through the modern beds UK sale range with your measured footprint in hand makes that judgment much easier.
Frame style affects the comparison more than people expect. A slim framed queen can occupy less total floor area than a heavily upholstered double with a deep winged headboard. If you want the larger sleeping surface without the larger footprint, look for platform frames with narrow side rails.
Storage frames change the maths in your favour. An ottoman base on a 150cm wide bed offers a substantial storage void, often enough to hold spare bedding, seasonal clothing and luggage. That can remove the need for a separate blanket box or a second chest of drawers, freeing floor space elsewhere in the room. The modern ottoman beds UK sale range shows how much capacity sits under a larger frame.
Upholstered frames in either size soften the acoustics of a bedroom with hard flooring, and the modern fabric beds UK options cover both double and king widths so you can compare the same design across sizes rather than guessing.
This is where getting the size right pays off practically. UK double bedding fits 135cm by 190cm mattresses and is stocked everywhere. UK king size bedding fits 150cm by 200cm. A bed sold as queen in Britain will normally take king size bedding, but check the mattress measurement first.
Duvets follow their own logic. A double duvet is 200cm by 200cm, and a king size duvet is 225cm by 220cm. Many couples with a double bed prefer a king duvet purely for the extra overhang, which is worth knowing if your complaint about a double is being uncovered at night rather than being short of mattress.
Choosing a larger bed carries knock on effects. Sheets, mattress protectors and duvets in king size are less widely discounted than double, and a king mattress is heavier to turn and harder to carry up a narrow staircase. If access to your bedroom involves a tight turn, factor that in before ordering.
Bedside furniture also has to fit. A wider bed leaves less room either side, so shallow cabinets become important. Slim options from the modern bedside cabinets UK sale range are designed for exactly this squeeze, and a pair of narrow units usually looks more considered than one wide table on a single side.
Choose a double if the room is under about 3.2m in its shorter dimension, if you sleep alone, or if the bed is for guests. Choose a queen or UK king if two adults share nightly, if either sleeper is tall, or if the room can absorb the extra width without compromising the walkways.
If you are still weighing it up, prioritise the room measurement over the aspiration. A slightly smaller bed in a room that moves well is more pleasant to live with than a large bed you have to squeeze past every morning. We list full frame footprints at Furniture in Fashion so you can settle that question before anything is delivered.
Because the terminology is inconsistent, a short checklist saves trouble. Look for the mattress width and length in centimetres, stated separately from the frame dimensions. Then look for the external frame width and length. If a listing gives only one pair of numbers, ask which they refer to.
Be wary of imperial only descriptions. A bed described as 5ft could be a 150cm UK king size or a 152cm queen from another system. Two centimetres will not affect sleep but will affect how a fitted sheet sits.
The same caution applies to secondhand purchases and inherited frames. An older frame may have been made for a mattress size no longer in common production, and finding a replacement mattress can then become the harder half of the job.
It is worth being honest about the consequences, because they are the most common regret in bedroom furnishing. Walkways below about 50cm force you to turn sideways, which becomes tiresome quickly. Bed making from a narrow gap is genuinely difficult, and tucking in a duvet against a wall means kneeling on the mattress.
Wardrobe access suffers in a way that is easy to overlook when planning. A hinged door that only opens to forty five degrees makes reaching hanging clothes awkward, and drawers that cannot fully extend hold less than their stated capacity in practice.
Cleaning is the third casualty. If a vacuum cannot pass either side of the bed, dust accumulates along the skirting where you cannot reach it. None of these problems appear on a specification sheet, but all of them are felt daily.
The most satisfying bedrooms are usually the ones where the bed is one size smaller than the maximum that would physically fit. That leaves room for proper bedside furniture, a clear route to the window and space to open storage fully.
If you are torn between two sizes, spend a week paying attention to how you actually sleep. If you wake in roughly the same position you started in, a double is likely to be sufficient. If you and your partner regularly disturb one another, the extra width will earn its floor space.
Consider the whole scheme rather than the bed alone. A well proportioned double with matching bedside cabinets and a wardrobe that opens properly reads as a finished room. A larger bed wedged in with mismatched furniture around it does not, whatever the mattress specification says.
They are very close. A UK king size is 150cm by 200cm, and a queen is typically around 152cm by 203cm. In Britain, beds listed as queen are usually 150cm wide and take king size bedding.
Around 15cm wider and 10cm longer. Each sleeper gains roughly 7.5cm of personal width compared with a double.
In the UK, yes in most cases, because beds sold as queen here are generally 150cm wide. Confirm the mattress measurement first, as a 152cm mattress can make 150cm fitted sheets tight.
It can, but clearance suffers. In rooms under about 3.2m in width you may be left with less than 60cm either side, which makes bed making and wardrobe access awkward.
For many couples, yes. Each person has 67.5cm of width. Light sleepers, taller sleepers or anyone sharing with a child or pet usually find the larger size more comfortable.
Most UK beds are either 190cm or 200cm long. Singles, small doubles and doubles measure…
A king bed in the UK has mattress dimensions of 150cm by 200cm, which is…
A standard size single bed in the UK has a mattress of 90cm by 190cm,…
A queen size bed is approximately 150cm by 200cm, which is 5ft by 6ft 7in…
Double beds are 190cm long in the UK, which is 6ft 3in, and that length…
An American queen size bed measures 152cm by 203cm, or 60in by 80in, while Australia…
This website uses cookies.