You can shop for a metal bed online with real confidence if you do three things before you add anything to your basket: measure the room and the route into it, read the full product dimensions rather than the mattress size alone, and check how the frame is built and supported. Those three steps answer most of the questions that would otherwise only come up once the bed is half assembled.
Everything else is refinement. A good place to start is our modern metal beds UK collection, which shows how much detail a well written product page should give you, from frame footprint to headboard height.
It is tempting to begin with photographs. A better approach is to begin with a tape measure and a sketch. Draw the room roughly to scale and mark the door, the direction it opens, the windows, radiators, sockets and any fitted wardrobes. Then mark where you would like the headboard to sit.
Once you know the wall length and the depth of the room, you can work out the largest bed that still leaves comfortable space around it. As a guide, aim for around 60 cm of clear floor along any side you walk past regularly and at the foot of the bed. Less than that and the room starts to feel like a corridor.
Think too about what else needs to fit. A bed rarely lives alone. Bedside tables, a chest of drawers and a wardrobe all compete for the same floor, and it is easier to choose the bed once you know where they will go. Browsing our wider bedroom furniture UK sale range at the same time helps you picture the whole room rather than a single piece.
UK mattress sizes are not the same as European or American sizes, so it is worth checking that you are reading the right measurements. The standard UK sizes are:
These figures describe the mattress, not the frame. A metal bed frame will be a little wider and longer, and a frame with a projecting footboard or curved headboard can add more. Always look for the external dimensions of the frame on the product page and use those when you plan the room. Our king size metal beds UK pages, for example, list the full frame footprint so you can plan with real numbers.
A clear product page gives you more than a headline size. Before you decide, look for each of the following:
If a detail is missing, ask. A retailer who knows their products should be able to tell you the height of a headboard or the gap between slats without hesitation.
You cannot rock a bed in a showroom when you buy online, so look for clues in the description and the photography.
Steel is the usual material for modern metal beds. Thicker tubing and solid connecting brackets make for a quieter, more stable frame. A centre rail running from head to foot, with at least one supporting leg in the middle, is important for doubles and larger sizes because it stops the slats from bowing over time.
Most metal frames are bolted together. Well designed fixings use brackets that lock the rails firmly into place, sometimes with rubber or nylon washers to prevent metal rubbing against metal. That small detail goes a long way towards stopping squeaks.
Powder coating is a durable finish that resists chips and scratches better than standard paint. Close up photographs should show an even colour without drips or patchy areas. If you live in an older home where bedrooms can be cool and slightly damp in winter, a well protected finish matters even more.
A bed frame and a mattress work as a pair. Sprung wooden slats, which are slightly curved, add a little give and suit most foam and hybrid mattresses. Solid or metal slats feel firmer. Whatever the type, the gaps between slats should not be too wide, as wide gaps can let a foam mattress sag between them and may affect any warranty. Many mattress makers suggest gaps of no more than around 7 to 8 cm, so check your mattress guidance before you buy.
If you are buying a new mattress at the same time, look at our modern mattresses UK range alongside the frame. It is also worth knowing that firmness descriptions vary between brands. Our article on how mattress firmness labels compare in UK testing explains why the words on the label do not always match how a mattress feels.
Finally, think about height. A deep mattress on a frame with a high base can sit well above standard bedside tables, which makes reaching for a lamp awkward. Our guide to bedside table measurements for UK bedrooms explains how to match surface heights so the bed and its neighbours sit comfortably together.
This is the step that most often catches people out. Metal beds usually arrive flat packed, but the headboard and footboard can be large single pieces. Measure every point the boxes need to pass:
Product pages often list the size of the largest box. If they do not, ask before ordering. It is far easier to choose a frame with a split headboard than to discover on delivery day that it will not turn the corner on your landing.
Read the delivery and returns information on any site before you buy, so you know what to expect. Our beds come with free delivery to most UK mainland postcodes. Returns are available up to 30 days. Plan delivery for a day when you have time to unpack and check the parts, and keep the packaging until you are happy that everything is complete and undamaged.
Most metal beds can be assembled by two people in a reasonable amount of time with basic tools. A few habits make the process smoother:
If a frame creaks, it is usually a loose bolt or two metal parts touching. Tightening the fixings or adding a thin felt pad at the contact point normally solves it.
Product photographs are styled to show the bed at its best, so look beyond the bedding. Zoom in on the joints, the feet and the headboard detail. Look for a photograph of the frame without a mattress if one is available. Remember that screen settings can shift colours slightly, so a soft black or bronze may look a touch warmer or cooler in person.
When you have narrowed down a shortlist, take a moment to look at the full range at Furniture in Fashion, comparing sizes, finishes and headboard styles side by side before you commit.
It depends on the design. Simple frames add only a few centimetres, while frames with decorative headboards or projecting footboards can add more. Always plan with the external frame dimensions.
A well built metal bed should be quiet. Squeaks are usually caused by loose fixings or metal touching metal, and are normally solved by tightening bolts or adding washers or felt pads.
For doubles and larger, yes. A centre rail with a supporting leg keeps the slats level and helps the mattress last longer.
Usually, provided it is the same UK size and the slat spacing suits the mattress type. Check the mattress maker’s guidance on slat gaps before you buy.
Choosing between a framed metal king size bed and a minimal metal platform bed is…
Measuring properly is the surest way to make sure a new metal king size bed…
A guest room has an unusual brief. It needs to feel welcoming and comfortable for…
A metal storage bed turns the space beneath the mattress into somewhere genuinely useful. In…
For pet owners, the most practical metal bed has a smooth, matt powder coated finish…
Detached family homes usually offer more space and more bedrooms than terraces or flats, which…
This website uses cookies.