How To Reupholster A Bar Stool On Your Own: 5 Simple Steps

Even the most durable, the finest quality furniture requires some renovation from time to time. Fortunately, most renovations can be done at home – all on your own. Reupholstering chairs, bar stools  included, is a relatively simple task, and you can easily do it independently – even if you have absolutely no experience in the area. The specifics will surely depend on the particular cushioning material, yet you will need some new upholstery (which is quite obvious), some adhesive (for fabric), special fixation bolts (for leather), and a screwdriver. On the whole, the process can be completed in several simple steps.

Unscrew the seat

Carefully remove the seat and put it aside. Here is where the screwdriver comes in.

Measure the amount of new upholstery you are going to need

To measure the amount of upholstery you are going to need, turn the seat upside down and place on the new fabric / leather. Circle the amount of the material you are going to need, and do not forget to leave a couple of extra centimeters to ensure the fixation below the seat. Cut the required amount with sharp scissors (you might need special scissors for leather).

Remove the old upholstery

This might take a while for fabric stools, because the upholstery can be glued to the cushion. If you cannot remove it, just leave it as is.

Press the cushioning foam

Press the foam as hard as you can. Usually, it is enough to seat on an upside down cushion for a while.

Adjust new upholstery

Use adhesive for fabric and fixation bolts for leather to carefully adjust the new material. If it is adhesive you are using, do not use the chairs until the glue is completely dry. Then screw the seat back to the stool.

Changing the upholstery on a chair is relatively simple procedure, and you might even have to do it on a regular basis. Sure, if you want to spare your time and energy, it is better to stick to fine quality upholstery – either solid fabric or genuine leather is usually a wise choice. It is also important to evaluate the state of your bar stool before you set down to reupholstering it. As a rule, fine quality chairs feature a durable build, but you still have to evaluate the actual condition of your furniture piece. Sometimes, the upholstery is the tiniest of your problems.

To make sure that the build is durable and the stool will serve you for years, it is advisable to stick to quality solutions – which are generally a bit more expensive than most budget furniture. Yet, in the long run, the investment is totally worth it – you will at least stay confident that the furniture piece stays with you for decades. A lot of high quality bar stools and other furniture solutions are available at Furniture in Fashion  store. This is one of the best furniture distributing platforms in the United Kingdom, vouching for the highest quality and the most impressive design of the sold items.