To measure a room for a leather sofa, you need four sets of numbers: the wall space the sofa will occupy, the walkways around it, the viewing or conversation distances, and the full delivery route from the front door to the room. Most problems happen because people measure the first and forget the fourth.
Leather makes accuracy more important than usual. Leather sofas are typically heavier than fabric equivalents, the frames are often deeper, and the upholstery cannot be compressed or squeezed through a tight doorway the way a soft fabric back sometimes can. Fifteen minutes with a tape measure prevents almost every issue.
You will need a steel tape measure of at least five metres, a notepad, masking tape and a second person for the longer spans.
Record the length and width of the room at floor level, then again at about one metre high. Older British houses rarely have parallel walls, and a 5cm difference between the two readings is common. Always work with the smaller figure.
Measure the wall where the sofa will sit, from corner to corner. Note the position of radiators, skirting boards, sockets, light switches and any window sill that overhangs.
Deep skirting boards push a sofa forward by two or three centimetres. Radiators need a gap of at least 10cm so heat is not trapped against the leather, which dries out the hide over time. Deduct these before deciding the maximum width.
Take the clear wall measurement and subtract at least 20cm in total, allowing 10cm of breathing space at each end. A sofa wedged wall to wall looks fitted rather than furnished, and it makes cleaning behind it awkward.
Measure from the wall into the room to the point where the sofa front can sit without blocking movement. Leather sofas often run 95cm to 105cm deep, more than many fabric designs, so check this figure carefully against the listing.
Use masking tape to lay out the exact width and depth on the floor. This converts abstract numbers into something you can walk around, and it reveals problems that a drawing will not.
Any principal route through the room needs 90cm of clear width. Secondary routes, such as the gap between a sofa and a coffee table, can drop to 60cm at the narrowest point.
Leave 40cm to 45cm between the sofa front and the coffee table. Closer than this and people catch their shins. Further and reaching a cup means standing up. If you are still choosing a table, our modern coffee tables UK sale listings include full dimensions so you can add them to your floor plan.
For a television, measure from the intended seat position to the screen. A comfortable distance is roughly one and a half to two and a half times the screen diagonal. Position the sofa before buying a screen where possible, rather than the reverse.
If chairs or a second sofa face the leather sofa, keep facing seats within 2.4 metres of each other. Beyond that, conversation becomes effortful and the group feels formal.
Open every door in the room fully and mark where it stops. Check that internal doors, cupboard doors and casement windows all clear the sofa footprint. A door that touches the arm of a leather sofa will scuff the hide within weeks.
Record the clear opening width with the door open, not the frame width. Take the height too. Then measure the diagonal of the opening, since most sofas are carried in at an angle rather than flat.
A straight hallway is rarely the problem. The turn from hallway into the living room is. Measure the corridor width at the turn and the length of the wall the sofa must pivot against. If the hall is narrower than the sofa depth plus 10cm, the turn will be tight.
For flats and upstairs rooms, measure the stair width, the ceiling height above the stairs, the headroom at any turn, and the landing depth. Half landings with a 90 degree turn are the most common obstacle in British properties. Note the handrail too, since a projecting rail reduces the usable width considerably.
The sofa’s packed size is larger than its assembled size, sometimes by 8cm to 12cm on each dimension. Check the listing for both figures, and ask whether the legs detach and whether the back is removable. Many leather sofas have bolt on backs that reduce the carrying depth by 20cm or more, which resolves most access problems.
Beyond size, leather brings a few considerations that fabric does not.
Position matters for the material itself. Keep the sofa at least 30cm from a radiator and out of prolonged direct sunlight. Heat dries the hide and causes cracking over years, while strong sunlight fades aniline and semi aniline leathers noticeably.
Weight matters for the floor and the route. Leather sofas with hardwood frames are substantial, and they cannot be dragged across a wooden floor without risk. Felt pads under the feet are worth fitting on delivery day.
Access matters more because leather cannot be compressed. A fabric sofa with a soft back can sometimes be persuaded through a tight gap. A leather sofa with a firm padded back cannot, and forcing it creases the hide permanently.
If you are comparing models, our modern leather sofas UK range lists assembled and packed dimensions on every product page, along with details of whether the back detaches.
Write everything in one place, in centimetres, with a note of where each figure was taken. A photograph of the tape measure in position is useful when you are standing in a showroom weeks later.
Keep a short summary list: maximum sofa width, maximum depth, maximum height, narrowest doorway width, narrowest doorway diagonal, stair headroom. Six numbers will answer almost every question you need to ask.
Then compare against the specification rather than the photograph. Product images are styled to look generous, and a sofa that appears compact in a large showroom can be substantial in a terraced living room.
Once you know the maximum, resist filling it. A sofa 20cm narrower than the available space usually looks better and leaves room for a side table or a plant at one end.
In a compact lounge, a two seater leather sofa with an armchair gives the same seat count as a three seater with less visual bulk. Our 2 seater leather sofas UK sale range covers compact options with slimmer arms, which recovers useful centimetres in a small room.
For larger spaces, a corner configuration uses wall length efficiently while keeping the centre of the room open. Check the chaise orientation against your measured plan before ordering, because it cannot be changed later.
Everything in our range is listed with complete dimensions at Furniture in Fashion, and free delivery is available to most UK mainland postcodes.
Accurate measurements only help if the route is clear when the sofa arrives, and a few minutes of preparation prevents most of the difficulties that occur at the door.
Remove coat hooks, pictures and shelves from hallway walls along the route. Lift rugs and runners so nobody trips while carrying weight. Take internal doors off their hinges where the clear opening is marginal, since removing a door typically gains three to four centimetres plus the space the door itself occupies when open.
Clear the destination completely. Move the existing sofa out first, along with side tables and lamps, so the new piece can be set down immediately rather than balanced awkwardly.
Protect the floor with cardboard or an old sheet on wet days. Finally, have the assembled dimensions written down and to hand, so any question about clearance can be answered in seconds rather than guessed at on the doorstep.
Six essentials: maximum sofa width, maximum depth, maximum height, narrowest doorway width, that doorway’s diagonal, and stair or landing clearance if the room is not on the ground floor.
At least 10cm at each end against a wall, 90cm for main walkways, 60cm for secondary routes, and 40cm to 45cm between the sofa front and a coffee table.
Compare the doorway’s clear opening and diagonal against the sofa’s packed depth and height. If it is tight, check whether the legs detach and whether the back is removable, which commonly reduces the carrying depth by 20cm or more.
At least 30cm. Direct radiator heat dries the hide over time and can lead to cracking, particularly on aniline and semi aniline finishes.
Before, always. Measuring first gives you a maximum width, depth and height to filter by, which makes browsing quicker and prevents disappointment at the delivery stage.
Storage built into a corner sofa can remove the need for a separate box entirely,…
In an open plan living room a corner sofa works hardest as a room divider,…
Five seater corner sofas are comfortable when the seat depth, cushion construction and frame support…
A console table placed behind or beside a corner sofa solves several problems at once:…
Pairing a coffee table with a corner sofa is mostly a question of proportion: length…
A limited budget does not have to mean a disappointing corner sofa, provided the money…
This website uses cookies.