Before buying mirrored bedside cabinets, measure four things: the height from the floor to the top of your mattress, the clear width of floor beside the bed, the depth you can give up without blocking the walkway, and the space needed to open each drawer fully. Write these down for both sides of the bed, because walls, windows and radiators rarely make the two sides identical. With those numbers in hand, you can rule out most unsuitable designs in seconds.
That matters more with mirrored finishes than with most others. Glass panels reflect light, floors and everything placed nearby, so a cabinet that is slightly too tall, pushed hard against a radiator or squeezed into a corner looks more obviously wrong than a wooden one would. When you browse our modern mirrored bedside cabinets UK range, having your measurements ready makes it easy to compare each design on proportion rather than looks alone.
It is tempting to begin by measuring the gap on the floor, but the bed sets every other dimension. A bedside cabinet exists to hold a lamp, a glass of water and whatever you reach for at night, so its height and position should relate to where you actually lie.
Measure the bed as it is dressed, not the bare frame. Put the mattress topper on, add the duvet and press down lightly where you would normally sit. Then measure from the floor to that point. Many people are surprised to find a deep mattress and topper add several centimetres to what they assumed was a standard height.
Next, note the width of the headboard and whether it overhangs the frame. A wide or winged headboard reduces the usable space beside the bed and can clash with a cabinet top if the two sit at similar heights. If you are planning a new bed as part of a wider refresh, it helps to look at the whole room together across our modern bedroom furniture UK collections, so the bed and cabinets are chosen as a pair.
The most comfortable bedside cabinet height sits roughly level with the top of the mattress, or a few centimetres either side. At that height you can reach across without stretching up or leaning down, and a lamp placed on top throws light at a sensible level for reading.
With mirrored cabinets, height has a visual side as well. A cabinet that rises well above the mattress tends to dominate the bedside, and its mirrored top catches the ceiling light, which can be distracting when you are trying to wind down. One that sits too low reflects mostly floor, which can make the area feel darker than you expect.
If your bed is unusually high, such as an ottoman base with a thick mattress, look for taller cabinets or designs with legs that lift the body. If it is low and modern, a squatter cabinet will keep the lines calm.
Measure from the side of the bed frame to the nearest obstacle: a wall, a wardrobe, a window recess or a door frame. Do this at floor level and again at cabinet top height, because skirting boards, sills and radiator valves often stick out more than you notice.
Once you have the clear width, subtract a little. A mirrored cabinet pushed tight against a wall or wardrobe loses the sliver of shadow that gives it definition, and the glass edge is more vulnerable to knocks when there is no breathing room. A gap of a few centimetres on each side looks deliberate and makes cleaning easier.
In smaller UK bedrooms, particularly in terraced houses and flats, the space on one side of the bed is often narrower than the other. You do not always need matching cabinets. A slim cabinet on the tight side and a wider one opposite can work well, provided their heights and finishes relate to each other.
Depth is the dimension most often overlooked. A deep cabinet offers more surface space but pushes forward into the room, and mirrored furniture sitting proud of the bed can catch shins on the way to the bathroom at night.
Measure how far your bed extends from the wall, then decide how far forward the cabinet can come without narrowing the path along the side of the bed. As a rule of thumb, keep the front of the cabinet behind the line of a pillow, or close to it, so it feels tucked in rather than sticking out.
Also think about anyone else using the room. If a partner gets up earlier, or you share the space with a child who climbs into bed, a shallower cabinet with rounded or bevelled corners may be the calmer choice.
A cabinet that fits when closed can still be awkward to use. Measure how far a drawer will need to pull out, which is usually close to the depth of the cabinet itself, and check that nothing stands in its path. Bed frames with wide side rails, nearby wardrobe doors and freestanding radiators are the usual culprits.
If you are considering a design with a hinged door rather than drawers, note which way it opens. A door that swings towards the bed can be blocked by the frame or the duvet. Opening away from the bed is usually easier, though it depends on which side you sleep.
Many mirrored bedside cabinets use runners and handles that suit the glamour of the finish, such as crystal style knobs or slim metal pulls. Allow a centimetre or two for handles when measuring depth, as they add to the overall footprint.
Mirrored furniture is generally heavier than it looks, because glass adds weight to the carcass. Before ordering, measure the narrowest points between your front door and the bedroom: the hallway, the turn at the bottom of the stairs, the landing and the bedroom door itself.
Most bedside cabinets are compact enough to pass through without difficulty, but older properties with tight winding staircases or loft conversions with low doorways can present a challenge. Check the product dimensions against those measurements, including the diagonal, before you commit.
Once the practical measurements are settled, spend a moment thinking about what each cabinet will reflect. Stand where the cabinet will go and look at the opposite wall and ceiling. If you see a busy window view, a cluttered shelf or a bright ceiling light, that is roughly what the mirrored panels will show back.
In a north facing room, mirrored cabinets can bounce useful daylight into darker corners. In a bright south facing room, they can create glare at certain times of day. Moving a cabinet slightly, or angling a lamp, often solves this without needing a different design.
A mirrored cabinet also reflects the floor. A pale carpet will lighten the base of the bed, while dark floorboards create a richer, moodier look. Neither is wrong, but it is worth knowing in advance.
Skirting boards stop a cabinet from sitting flush against the wall, so measure their depth and subtract it from the space available. Some cabinets have a cut out at the back or legs that clear the skirting, which lets them sit closer to the wall.
Look for plug sockets beside the bed and note their height. You will want easy access for lamps and phone chargers, and a cabinet that hides the socket entirely means reaching behind glass every night. Cable management matters too: a tangle of wires reflected in a mirrored side panel is hard to ignore.
If a radiator sits next to the bed, leave a clear gap so warm air can circulate. Constant heat directly against a cabinet is not good for adhesives or finishes over time.
Mirrored bedside cabinets often form part of a wider look. If you already own, or plan to add, mirrored bedroom furniture UK such as a wardrobe or dressing table, take note of the edge detail, frame colour and handle style so the pieces relate to one another.
Measure heights across the room, too. A cabinet that echoes the height of a nearby mirrored chest of drawers UK sale piece, or sits clearly lower, will look intentional. Two pieces that are almost but not quite the same height can look like a near miss.
Not every piece needs to be mirrored. A single pair of mirrored cabinets against a fabric headboard and painted walls can feel more refined than a room where every surface reflects.
For more detail on standard heights and spacing, our guide to bedside table measurements for UK bedrooms covers the numbers that apply to every style, mirrored or otherwise.
Measuring well takes about ten minutes, and it changes how you shop. Instead of falling for a design and hoping it fits, you can filter out anything too tall, too deep or too wide, then compare what remains on style, storage and finish. That approach is especially useful with mirrored cabinets, where a good fit looks crisp and considered while a poor one is reflected from every angle.
At Furniture in Fashion, we list full dimensions on every product page so you can check them against your notes before ordering, and we offer free delivery to most UK mainland postcodes.
Aim for a height close to the top of your dressed mattress, within a few centimetres either way. This keeps lamps and essentials within easy reach and avoids the cabinet looking oversized beside the bed.
A small gap of a few centimetres is usually enough. It protects the glass edges from knocks when making the bed and gives the cabinet a cleaner outline.
Yes. Mirrored finishes can make a compact room feel lighter. Choose a shallow depth and keep the walkway clear, and consider a slimmer design on the narrower side of the bed.
Not necessarily. Two different widths can work well in an uneven room, as long as the heights and finishes feel related.
Georgian townhouse master bedrooms have tall ceilings, generous sash windows and a strong sense of…
Bay windows give many UK bedrooms their character, flooding the room with light from three…
Rattan bedside cabinets bring texture and warmth to a modern townhouse main bedroom, a room…
Spotlights and pendant lights are found in almost every UK home, yet they often compete…
Cylinder spotlights are usually a good choice for a garden room, but the building itself…
Ochre and mustard walls bring warmth and character to a bedroom, and fluted bedside cabinets…
This website uses cookies.