A custom dining table in the UK typically costs between £900 and £4,000, with most falling in the £1,200 to £2,500 range for a six to eight seater in solid hardwood. Simpler builds in softwood or with a smaller footprint can start nearer £600. Larger tables in premium timber, or those with complex bases and specialist finishes, regularly exceed £5,000.
The wide range exists because a custom table is priced from its parts: timber cost, board thickness, base complexity, joinery method, finish and delivery. Understanding how each element contributes makes it far easier to judge a quote and to see where a specification can be adjusted without losing quality.
Material is usually the largest single cost. Pine and other softwoods are the least expensive and suit painted or heavily distressed finishes. European oak, the most common choice for UK dining tables, sits in the middle and offers a good balance of durability and appearance. Walnut, elm and ash cost considerably more, and reclaimed timber can be the most expensive of all once sourcing, cleaning and de nailing are accounted for.
Board width matters too. A table top made from a few wide boards costs more than one made from many narrow strips, because wide clear boards are harder to source and more of the tree is wasted producing them. A single slab top, where the whole surface comes from one piece, is the most expensive option.
Cost rises with area, but not evenly. A table 20 percent longer may cost 35 percent more, because longer boards are harder to source and the structure needs additional support to prevent sag.
Thickness has a similar effect. Moving from a 30mm top to a 50mm top nearly doubles the timber volume. Thick tops look substantial but add weight and cost in equal measure.
A simple four leg frame is the least expensive. Tapered or turned legs add machining time. Trestle and pedestal bases require more material and more complex joinery. Steel bases add fabrication, welding and powder coating, often carried out by a separate workshop, which adds coordination cost as well as material cost.
How the pieces are joined affects both price and longevity. Screwed and glued butt joints are quick and cheap. Mortise and tenon, dovetail and breadboard end construction take considerably longer but produce a table that survives decades of seasonal movement. When comparing quotes, this is often where the difference lies.
Hardwax oil is the usual choice and is relatively economical. Multi coat lacquer, hand rubbed finishes and specialist colour matching all add labour. Staining to match existing furniture requires sampling and adjustment, which takes time.
Adding an extending function typically increases cost by 25 to 40 percent. The hardware itself is a modest expense, but fitting it accurately so the leaf sits flush and the runners glide smoothly takes skilled time.
These are broad guides rather than quotations, and workshops vary considerably by region and reputation.
£600 to £1,000: Smaller tables, softwood or thinner engineered tops, simple leg frames, straightforward oil finish. Often produced by smaller makers or as semi custom variations on an existing design.
£1,000 to £2,000: The most common band. Solid oak or ash, six to eight seats, 30mm to 40mm top, four leg or simple trestle base, hardwax oil finish. Good joinery and a table built to last.
£2,000 to £4,000: Larger sizes, premium timber such as walnut or elm, thicker tops, more complex bases, extending mechanisms, or specialist finishes. Also the band for tables from established makers with longer waiting lists.
£4,000 and above: Single slab tops, very large tables, sculptural bases, rare timber, or designs from named furniture makers. At this level you are buying design as much as construction.
Quotes do not always include everything. Delivery for a heavy solid timber table often costs £100 to £300 depending on distance and access, since two people and a suitable vehicle are required. Installation, where the table is assembled in your home, may be extra.
Design fees are sometimes charged separately, particularly if drawings and revisions are involved. Timber samples and finish samples may carry a small charge, though many makers absorb this.
Waiting time is a cost of a different kind. Custom tables commonly take six to sixteen weeks, and longer during busy periods. If you need a table for a specific date, factor that in early.
Custom is worth the investment in specific situations. Unusual room dimensions are the clearest case: if your space needs a 210cm by 95cm table and nothing standard comes close, custom solves a problem that money alone cannot.
Matching existing joinery is another. If a kitchen has a particular timber and finish, a custom table can be made to align exactly. Accessibility requirements, such as specific knee clearance or a pedestal base for wheelchair access, are also well served by custom work.
Where custom is less compelling is when the requirement is essentially a well made table in a standard size. Ready made tables at that specification are widely available, arrive far sooner, and cost considerably less. Our range of wooden dining tables UK sale covers common sizes in solid and engineered timber, and it is worth comparing before committing to a bespoke build.
The honest comparison is not simply price. A custom table gives you exact dimensions, chosen materials and a direct relationship with the maker. A ready made table gives you immediate availability, a fixed price with no surprises, and the ability to see the actual product before buying.
For many households, the practical middle ground is a well made ready made table in a size that suits. Our modern marble dining tables UK and glass topped ranges offer materials that would be expensive to specify custom, and the modern dining table and chairs sets UK sale take the guesswork out of matching seating to the table.
There is also a hybrid route. Buy a well proportioned ready made table and commission only what you cannot buy, such as a bench sized precisely to a window alcove. This keeps the bespoke element small and the cost proportionate.
Before accepting a quote, establish a few things. Ask what timber grade is being used, since the difference between prime and character grade oak affects both appearance and price. Ask how the top is jointed and whether breadboard ends or another method will control seasonal movement. Ask what finish is specified and how it should be maintained.
Clarify whether the quote includes delivery, assembly and VAT. Ask about the lead time and what happens if it slips. Ask whether the maker offers any guarantee, and what it covers.
Finally, ask to see previous work in person if possible. Photographs flatter furniture considerably, and running your hand along a finished edge tells you more about the quality of a workshop than any description.
A table is rarely the only expense. Chairs for six to eight people can easily match or exceed the table cost if bought bespoke, so most people pair a custom table with ready made seating. Our dining chairs UK sale includes designs in timber, fabric and leather that sit well with bespoke tops without duplicating the cost.
Lighting, a rug and storage complete the room, and it is worth allocating budget to those from the start rather than treating them as afterthoughts. The full dining collection at Furniture in Fashion covers all of these, and we offer free delivery to most UK mainland postcodes.
It makes most sense when you need an unusual size, a specific timber match, or particular accessibility features. For standard sizes in common materials, ready made tables offer similar quality at lower cost and shorter wait.
Usually six to sixteen weeks from order to delivery, depending on the workshop’s schedule and the complexity of the design. Busy periods extend this.
Pine and other softwoods are the least expensive, and they suit painted or distressed finishes well. They mark more easily than hardwoods, so they need more careful use.
Typically 25 to 40 percent. The hardware is inexpensive but fitting it so the leaf sits flush and the runners operate smoothly takes considerable skilled time.
Timber species and grade, dimensions and thickness, base design, joinery method, finish, lead time, delivery, assembly and VAT. Ask specifically about anything not stated.
What you put on a dining room table depends on how often the table is…
Acacia is harder than oak and full of dramatic grain variation, but it responds to…
Planning a dining area properly means allowing at least 90cm of clear space around every…
A wobbly dining table is usually a short job once you know what is actually…
Rugs do belong under dining tables in most rooms, though the arrangement only works when…
Choosing a dining table should start with the room, not the table. Measure the space,…
This website uses cookies.