A double bed in the UK is 190cm long, which is 6ft 3in. The standard double mattress measures 135cm wide by 190cm long, or 4ft 6in by 6ft 3in, and that length is shared with UK singles and small doubles. Once a frame is added, the overall length usually rises to somewhere between 195cm and 210cm depending on the headboard depth and whether there is a footboard.
The 190cm figure is worth committing to memory, because it is the single most common source of surprise when British buyers compare beds with continental or American sizes. European doubles are typically 200cm long, and American full size mattresses are around 191cm long but narrower at 137cm wide. If you are buying in the UK, 190cm is the number to plan around.
A standard UK double mattress is 135cm by 190cm. That gives each of two sleepers 67.5cm of width, which is narrower than a single bed at 90cm. The length of 190cm suits sleepers up to roughly 175cm to 180cm tall before feet start reaching the end of the mattress.
Sitting below the double is the small double, sometimes called a three quarter bed, at 120cm by 190cm. Above it is the king at 150cm by 200cm, which is the first UK size to gain length as well as width. This is the detail that catches people out: moving from a double to a king adds 10cm of length, so a bed recess that comfortably held a double may not take a king.
It also means bedding is not interchangeable in the way people assume. A double fitted sheet made for 190cm will be too short for a 200cm king mattress, and a king sheet on a double mattress will never sit tight at the corners. Buy by measurement rather than by name, particularly when ordering from overseas sellers.
Plan on the external frame length, not the mattress. A slim wooden headboard adds around 5cm, and a deeply padded upholstered headboard can add 12cm to 18cm. Add a footboard and you may need another 8cm. A 190cm mattress frequently needs 200cm to 210cm of clear wall run.
For circulation, allow 60cm to 70cm along at least one long side so you can walk past and make the bed comfortably. If both sides of the bed are used, that clearance ideally applies to both. At the foot, 50cm is workable if you are simply passing, though 70cm is better if a chest of drawers or wardrobe opens into that space.
In practical terms, a comfortable room for a standard double is around 2.4m by 3m. Many UK second bedrooms come in smaller than that, and a double still fits, but the layout has to be deliberate. Pushing one long side of the bed against a wall is the usual solution, though it makes changing bedding more awkward and only suits a single sleeper or a couple willing to climb across.
British housing stock brings specific obstacles. Chimney breasts create alcoves that are often close to but not quite 190cm wide. Sash windows sit low, so a tall headboard placed under one blocks light and the window catch. Bulkheads over stairs cut into the corner of upstairs rooms, and radiators are frequently fitted exactly where the bed wants to go.
Measure at floor level, at mattress height and at headboard height, because skirting boards and window sills change the usable dimension at each level. If a radiator sits behind the intended headboard position, allow a small gap for heat to circulate rather than pressing the bed flush against it.
Where length is the constraint rather than width, a divan base is the most efficient choice because its footprint closely matches the mattress. A frame with posts and side rails always occupies more. Our modern double leather beds UK sale listings show external dimensions alongside mattress size, which makes fitting a bed into a tight alcove far more predictable.
In a compact room, frame profile does much of the work. A low slatted frame with visible legs lets the eye travel under the bed, which makes the floor read as larger. A heavy divan base with a tall padded headboard has more presence and can dominate a small room, though it brings storage in return.
Fabric frames soften a room and absorb sound, which helps in bedrooms with hard flooring. Our modern double fabric beds UK sale range includes low headboard designs suited to rooms with sloping ceilings or windows set low in the wall. Wooden frames tend to be slimmer in profile and add warmth against neutral walls, and our modern double wooden beds UK selection covers both painted and natural grain finishes.
Whichever style you prefer, check the internal frame measurement matches a 135cm by 190cm mattress, and confirm the base type suits your mattress. Slat spacing of around 7cm or less gives proper support for memory foam and hybrid mattresses, which need continuous contact to perform as intended.
In rooms where a double leaves little floor space, storage has to come from the bed or the walls. Ottoman lift up frames convert the whole area beneath the mattress into one compartment, ideal for spare bedding and suitcases. Divan drawers offer easier day to day access to flatter items such as towels and folded clothes, provided you have clearance on the side they open.
Vertical storage is the other lever. A tall, narrow chest of drawers uses less floor area than a wide low one while holding a similar amount, and it draws the eye upward, which helps a small room feel taller. Our modern chest of drawers UK sale range includes slim designs intended for narrow gaps between a bed and a wall.
A well placed mirror is the last piece. Positioned opposite or beside a window, it bounces daylight across the room and makes a bedroom that is mostly filled by a double bed feel considerably more open. Slim wall mounted designs avoid using any floor space at all.
Before ordering, walk the route the bed will take. Measure the front door width, the narrowest point of the hallway, the diagonal at the turn of the stairs and the bedroom door. A flat packed frame arrives in manageable sections, but a one piece divan base or a deep pocket sprung mattress needs real clearance at the stair turn.
Rolled mattresses are a practical answer in older properties with tight staircases, since they arrive compressed and expand in the room. If you are ordering a sprung mattress that cannot be bent, confirm the longest dimension will clear every turn on the route.
At Furniture in Fashion full dimensions are listed on every bed and mattress, and we offer free delivery to most UK mainland postcodes so a new double can be planned in with confidence.
The 190cm figure suits most sleepers, but comfort depends on how you lie rather than height alone. Side sleepers curl slightly and rarely reach the end of the mattress. Back sleepers extend fully and often notice the last few centimetres, particularly if they push their heels down while stretching. Front sleepers tend to angle one leg outwards, which uses width rather than length, so a double can feel short in a different way when two people share it.
Pillow depth quietly reduces usable length. A firm pillow with a deep gusset can occupy 20cm at the head of the bed, leaving less mattress than the specification suggests. Swapping to a flatter pillow, or moving to a lower profile mattress, can recover enough space to make a noticeable difference without changing the bed at all.
Mattress support also affects how the length feels. A sagging middle causes sleepers to shift towards the centre and drop their feet lower, which makes the bed feel shorter than it measures. A well supported base keeps the surface even from end to end, so the full 190cm stays usable. If the bed is old and the surface dips, the problem is usually support rather than size, and replacing the base or slats is often the more sensible first step.
6ft 3in, based on a 190cm mattress length. The width is 4ft 6in, or 135cm.
No. European doubles are usually 200cm long, 10cm more than the UK’s 190cm, so bedding and frames are not interchangeable.
It is tight. At 190cm, a six foot sleeper has very little clearance at the feet. A king size mattress at 200cm is the more comfortable choice.
Around 2.4m by 3m is comfortable. Smaller rooms can take one if you place a long side against a wall and choose a slim headboard.
Yes, a standard 135cm by 190cm mattress. Always check the internal frame measurement, as some continental style frames are built for 200cm mattresses.
Most UK beds are either 190cm or 200cm long. Singles, small doubles and doubles measure…
A king bed in the UK has mattress dimensions of 150cm by 200cm, which is…
A standard size single bed in the UK has a mattress of 90cm by 190cm,…
A queen size bed is approximately 150cm by 200cm, which is 5ft by 6ft 7in…
Double beds are 190cm long in the UK, which is 6ft 3in, and that length…
An American queen size bed measures 152cm by 203cm, or 60in by 80in, while Australia…
This website uses cookies.