You make square bar stool cushions by measuring the seat top, cutting foam to match that exact square, wrapping the foam in a thin layer of wadding, then sewing a boxed cover from two square panels and a long side strip with a zip along the back edge. Ties or a grippy backing fabric hold the finished cushion in place. For a standard square seat, the whole job takes an afternoon and needs only basic sewing skills.
That is the process in outline. The detail matters, because a square cushion shows every error. A round pad hides a wobbly seam inside its curve, while a square pad puts four corners on display at seated eye level. Below we work through each stage in the order you would actually do it, with the practical notes that make the difference between a cushion that looks homemade and one that looks tailored.
Gather everything first. Stopping halfway to hunt for a zip is how projects stall.
A sewing machine is helpful but not essential for every version of this project. We cover a version without stitching further down, which suits anyone who wants a softer seat on a set of wooden bar stools UK homes so often pair with an island but has no interest in learning to sew.
Measure across the widest point of the seat top, front to back and side to side. Square seats are not always truly square, especially on solid timber stools where the edges may have been sanded. Note both figures and work to the smaller one if the difference is only a few millimetres.
Next, decide on the overhang. A cushion cut flush with the seat looks neat and stays put. A cushion cut 1cm larger on each side looks softer and more generous, which suits a relaxed kitchen. Anything beyond 1cm tends to droop over the edge and catch on clothing as people sit down.
Write your final foam dimensions on paper. You will use them three times: once for the foam, once for the top and bottom fabric panels, and once for the side strip.
Mark the foam on the top face using a long ruler and a marker. Cut with a smooth sawing motion rather than pressing down, keeping the blade upright so the sides stay square. Pressing hard compresses the foam and gives you a sloping edge that reads as a wonky cushion once it is covered.
Firm foam holds a crisp square shape and supports a seated adult for long stretches. Soft foam feels welcoming for the first ten minutes and then flattens. For a seat used daily at a breakfast bar, choose the firmer option. For occasional seating in a home bar, medium is fine.
Wrap the cut foam in one layer of wadding, taking it over the top and down the sides, and tack it in place with a few hand stitches or a light spray adhesive. Wadding rounds the hard foam edge just enough to stop the cover looking stretched, and it stops the foam squeaking against the fabric.
Bar stool cushions live in the busiest part of the home. They meet coffee cups, school bags, cooking steam and daily use. Fabric weight matters more than pattern. Look for a woven furnishing fabric with a tight weave. Cotton blends, wool mixes and hardwearing velvets all work well. Loose weave linen looks lovely for a season and then pulls at the corners.
Colour is worth some thought too. Mid tone greys, olives and warm neutrals hide daily marks far better than pale cream. If you want a lighter palette, choose a fabric with a subtle texture or fleck, which breaks up small marks visually. Our own range of modern fabric bar stools UK kitchens are built around follows the same logic, which is why textured mid tones appear so often across the collection.
Buy a little more fabric than the calculation suggests. Pattern matching across the top panel and side strip eats material quickly, and a spare offcut is useful if you ever need to patch a seam.
You need four pieces in total:
Cut on the straight grain of the fabric. Cutting on a slight angle creates a cover that twists as soon as it is filled, and no amount of pressing corrects it.
Start with the zip. Sew the two zip strip pieces to either side of the zip tape, right sides together, then press the seams away from the teeth. Join this zip section to the main side strip at both ends so you have one continuous loop that matches the perimeter of your square.
Pin the loop to the top panel, right sides together, working corner to corner. Clip the seam allowance of the strip at each corner so it turns cleanly. Sew all four sides, then repeat with the bottom panel, leaving the zip open. Trim the corners at a slight diagonal to reduce bulk, turn the cover through the zip opening and push each corner out with a blunt tool rather than scissors.
Compress the foam and wadding, feed it in diagonally, then let it settle and close the zip. The cover should feel snug. A cover that slides on easily will wrinkle within a week.
A cushion that shifts every time someone sits down becomes an irritation. Three approaches work well:
If your stools already swivel, avoid ties. They wrap around the base as the seat turns. Grip backing is the sensible choice for anything on a gas lift bar stools UK design with a rotating seat.
If sewing is not for you, cut the foam and wadding as above, then wrap the whole pad in fabric as you would wrap a parcel. Fold the corners neatly, pull the fabric taut and staple it to a thin plywood base cut to the same square. The plywood gives the cushion structure and hides the staples. Attach the base to the seat with hook and loop tape.
This method produces a firm, tailored pad that suits square topped timber stools particularly well. The only compromise is washing: the cover cannot come off, so it needs spot cleaning instead.
Turn and rotate the cushions weekly so wear spreads evenly. Vacuum them with a brush attachment to lift crumbs from the seams before they work into the weave. If your cover has a zip, wash it cool and reunite it with the foam while very slightly damp, which helps it settle without creases.
Expect to refresh the foam every few years on seats in daily use. Foam is inexpensive and replacing it restores the cushion completely, which is a good reason to build the removable version if you can.
Making cushions is worthwhile when the stools themselves are sound and simply hard to sit on. It is less worthwhile when the frames are loose, the finish is tired or the height was never right for your worktop. In that case a cushion treats the symptom.
If you reach that conclusion, browsing the modern bar stools UK sale collection is a sensible next step, and it is worth looking at fully upholstered designs where the padding is built into the frame rather than sitting on top of it. At Furniture in Fashion we stock a wide choice of contemporary seating for kitchens, islands and home bars, with free delivery to most UK mainland postcodes.
Between 4cm and 6cm suits most seats. Thinner pads compress quickly. Thicker pads raise the seat noticeably, which can reduce the gap between seat and worktop and make sitting less comfortable.
A firm or medium firm upholstery foam holds its shape under daily use. Very soft foam feels pleasant briefly and then bottoms out, especially on a square pad where the corners take strain.
Yes, and it is a practical choice for a busy family kitchen. Outdoor furnishing fabrics resist marks and clean easily. Modern versions feel much softer than older ones, so the seat does not feel plasticky.
For four square pads at around 40cm across, allow roughly 1.5 metres of 140cm wide fabric. Add more if the design has a repeat you need to match across the tops.
Match the room. The cushion sits at eye level and reads as part of the wider scheme, so linking it to curtains, blinds or a rug looks more considered than matching the stool frame exactly.
Most domestic bar stools hold between 100kg and 150kg, with gas lift models commonly rated…
Distance from the counter is not a single measurement but four working together: overhang depth,…
Taking a gas lift stool apart looks intimidating because of the cylinder, but the job…
A 9 foot island, or 108 inches, comfortably seats four bar stools along one long…
Recovering round bar stools follows the same route as any seat pad, with one difference…
Building your own bar stools starts with choosing a construction method and drawing the stool…
This website uses cookies.